Choose a Category
Diameter Diameter |
|---|
|
|
|
Shape Shape |
|---|
 |  |
| Sheet and Bar | Rod and Disc |
 | |
| Round Tube |
Performance Properties Performance Properties |
|---|
|
Specifications Met Specifications Met |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
About Composites
More
Economical Garolite CE Sheets
- Color: Brown
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M100 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/14, UL 94HB
These Garolite CE sheets are often fabricated into parts where high strength is not required. They are made of a phenolic resin with cotton fabric reinforcement, which makes it easy to machine into mechanical parts, such as pulleys, gears, bushings, and washers. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| Thick. | Thick. Tolerance | Each | |
4" × 6" | |||
|---|---|---|---|
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 00000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 00000 |
12" × 12" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 0000 |
| 1/16" | -0.008" to 0.008" | 000000 | 0000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 00000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 00000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 00000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 00000 |
| 1" | -0.033" to 0.033" | 0000000 | 00000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 00000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
12" × 24" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 0000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 00000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 00000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 00000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
24" × 24" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
24" × 36" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 000000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
36" × 48" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 000000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 000000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 000000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 00000000 |
Economical Garolite CE Rods
- Color: Brown
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M100 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/14, UL 94HB
Sometimes called canvas-grade industrial laminate, phenolic, and Bakelite, these Garolite CE rods are often fabricated into parts where high strength is not required. They are made of a phenolic resin with cotton fabric reinforcement, which makes them easy to machine into mechanical parts, such as pulleys, gears, bushings, and washers.
| Dia. | Dia. Tolerance | 1 ft. Lg. | 4 ft. Lg. | |
| 1/4" | -0.005" to 0.005" | 0000000 | ||
| 5/16" | -0.005" to 0.005" | 0000000 | ||
| 3/8" | -0.005" to 0.005" | 0000000 | ||
| 7/16" | -0.005" to 0.005" | 0000000 | ||
| 1/2" | -0.005" to 0.005" | 0000000 | ||
| 9/16" | -0.005" to 0.005" | 0000000 | ||
| 5/8" | -0.005" to 0.005" | 0000000 | ||
| 3/4" | -0.005" to 0.005" | 0000000 | ||
| 7/8" | -0.005" to 0.005" | 0000000 | ||
| 1" | -0.005" to 0.005" | 0000000 | ||
| 1 1/8" | -0.005" to 0.005" | 0000000 | ||
| 1 1/4" | -0.005" to 0.005" | 0000000 | ||
| 1 3/8" | -0.005" to 0.005" | 0000000 | ||
| 1 1/2" | -0.005" to 0.005" | 0000000 | ||
| 2" | -0.005" to 0.005" | 0000000 | ||
| 2 1/2" | -0.005" to 0.005" | 0000000 | ||
| 3" | -0.005" to 0.005" | 0000000 | ||
| 3 1/2" | -0.005" to 0.005" | 0000000 | ||
| 4" | -0.005" to 0.005" | 0000000 | ||
| 4 1/2" | -0.005" to 0.005" | 0000000 | ||
| 5" | -0.005" to 0.005" | 0000000 | ||
| 6" | -0.005" to 0.005" | 0000000 |
Economical Garolite CE Tubes
- Color: Brown
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Not Rated
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/14
Made of a phenolic resin with cotton fabric reinforcement, these Garolite CE tubes are often fabricated into parts where high strength is not required. They can be easily machined into mechanical parts, such as rollers, bushings, and washers. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| OD | OD Tolerance | ID | ID Tolerance | Lg. | Each | |
1/32" Wall Thick. (-0.008" to 0.008") | ||||||
|---|---|---|---|---|---|---|
| 1/4" | -0.005" to 0.005" | 3/16" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 5/16" | -0.005" to 0.005" | 1/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 3/8" | -0.005" to 0.005" | 5/16" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 7/16" | -0.005" to 0.005" | 3/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 9/16" | -0.005" to 0.005" | 1/2" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
1/16" Wall Thick. (-0.008" to 0.008") | ||||||
| 5/16" | -0.005" to 0.005" | 3/16" | -0.003" to 0.003" | 40" | 000000000 | 0000 |
| 3/8" | -0.005" to 0.005" | 1/4" | -0.003" to 0.003" | 40" | 000000000 | 0000 |
| 7/16" | -0.005" to 0.005" | 5/16" | -0.003" to 0.003" | 40" | 000000000 | 0000 |
| 1/2" | -0.005" to 0.005" | 3/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 5/8" | -0.005" to 0.005" | 1/2" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 3/4" | -0.005" to 0.005" | 5/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 7/8" | -0.005" to 0.005" | 3/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 1/8" | -0.008" to 0.008" | 1" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
3/32" Wall Thick. (-0.008" to 0.008") | ||||||
| 3/8" | -0.005" to 0.005" | 3/16" | -0.003" to 0.003" | 40" | 000000000 | 0000 |
| 1/2" | -0.005" to 0.005" | 5/16" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 11/16" | -0.005" to 0.005" | 1/2" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
1/8" Wall Thick. (-0.008" to 0.008") | ||||||
| 1/2" | -0.005" to 0.005" | 1/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 5/8" | -0.005" to 0.005" | 3/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 3/4" | -0.005" to 0.005" | 1/2" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 7/8" | -0.005" to 0.005" | 5/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 1/4" | -0.008" to 0.008" | 1" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
| 1 1/2" | -0.008" to 0.008" | 1 1/4" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
3/16" Wall Thick. (-0.008" to 0.008") | ||||||
| 5/8" | -0.005" to 0.005" | 1/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 3/4" | -0.005" to 0.005" | 3/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 3/8" | -0.008" to 0.008" | 1" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
| 1 5/8" | -0.008" to 0.008" | 1 1/4" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
1/4" Wall Thick. (-0.008" to 0.008") | ||||||
| 3/4" | -0.005" to 0.005" | 1/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 1/8" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 1/4" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 40" | 000000000 | 00000 |
| 1 1/2" | -0.008" to 0.008" | 1" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
| 1 3/4" | -0.008" to 0.008" | 1 1/4" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
| 2" | -0.008" to 0.008" | 1 1/2" | -0.005" to 0.005" | 40" | 000000000 | 00000 |
| 3" | -0.008" to 0.008" | 2 1/2" | -0.005" to 0.005" | 40" | 000000000 | 000000 |
Slippery Conductive Garolite CE
- Color: Black
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M90 (Hard)
- For Use Outdoors: No
Graphite is added to these Garolite CE sheets to provide a slippery surface that reduces friction. The graphite also makes them conductive. Often used for bearings and wear pads, they're constructed of a phenolic resin with cotton fabric reinforcement. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| Thick. | Thick. Tolerance | Each | |
12" × 12" | |||
|---|---|---|---|
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 00000 |
| 1/2" | 0" to 0.05" | 0000000 | 00000 |
| 3/4" | 0" to 0.075" | 0000000 | 00000 |
| 1" | 0" to 0.1" | 0000000 | 00000 |
18" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
39" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |