Material Material |
|---|
|
Performance Properties Performance Properties |
|---|
|
Shape Shape |
|---|
 | Sheet and Bar |
 | Rod and Disc |
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Specifications Met Specifications Met |
|---|
About Composites
More
Ultra-High-Temperature Arc-Resistant
Garolite G-7 Sheets and Bars
- Color: Off-White
- Max. Temperature: 425° F
- Tensile Strength: 18,000-27,700 psi (Excellent)
- Impact Strength: 6.5-19.1 ft.-lbs./in. (Excellent)
- Hardness: Rockwell M65 (Hard)
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/17, UL 94 V-0
Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation. They are constructed of a silicone resin with fiberglass fabric reinforcement. Garolite G-7 is sometimes called silicone-grade laminate, phenolic, and Bakelite. Use it to fabricate high-frequency telecommunication equipment, transformers, and other parts that require a high heat tolerance.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Each | |
4" × 6" | |||
|---|---|---|---|
| 1/4" | -0.022" to 0.022" | 0000000 | 000000 |
| 1/2" | -0.033" to 0.033" | 0000000 | 00000 |
| 3/4" | -0.043" to 0.043" | 0000000 | 00000 |
| 1" | -0.049" to 0.049" | 0000000 | 000000 |
12" × 12" | |||
| 1/32" | -0.005" to 0.005" | 00000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 00000000 | 00000 |
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 3/16" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 00000000 | 000000 |
| 1/2" | -0.033" to 0.033" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
12" × 24" | |||
| 1/32" | -0.005" to 0.005" | 00000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 00000000 | 00000 |
| 1/8" | -0.012" to 0.012" | 00000000 | 000000 |
| 3/16" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 00000000 | 000000 |
| 1/2" | -0.033" to 0.033" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
24" × 24" | |||
| 1/32" | -0.005" to 0.005" | 00000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 00000000 | 000000 |
| 1/8" | -0.012" to 0.012" | 00000000 | 000000 |
| 3/16" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 00000000 | 000000 |
| 1/2" | -0.033" to 0.033" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 00000000 |
| 1" | -0.049" to 0.049" | 00000000 | 00000000 |
24" × 36" | |||
| 1/32" | -0.005" to 0.005" | 00000000 | 000000 |
| 1/16" | -0.008" to 0.008" | 00000000 | 000000 |
| 1/8" | -0.012" to 0.012" | 00000000 | 000000 |
| 3/16" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 000000 |
| 3/8" | -0.03" to 0.03" | 00000000 | 000000 |
| 1/2" | -0.033" to 0.033" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 00000000 |
| 1" | -0.049" to 0.049" | 00000000 | 00000000 |
36" × 48" | |||
| 1/32" | -0.005" to 0.005" | 00000000 | 000000 |
| 1/16" | -0.008" to 0.008" | 00000000 | 000000 |
| 1/8" | -0.012" to 0.012" | 00000000 | 000000 |
| 3/16" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000000 |
| 3/8" | -0.03" to 0.03" | 00000000 | 00000000 |
| 1/2" | -0.033" to 0.033" | 00000000 | 00000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 00000000 |
| 1" | -0.049" to 0.049" | 00000000 | 00000000 |
| Thick. | Thick. Tolerance | Each | |
1" × 24" | |||
|---|---|---|---|
| 1/8" | -0.012" to 0.012" | 00000000 | 000000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 00000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 00000 |
| 1" | -0.049" to 0.049" | 00000000 | 00000 |
1" × 48" | |||
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 00000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
1 1/2" × 24" | |||
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 00000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 00000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
1 1/2" × 48" | |||
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
2" × 24" | |||
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 00000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
2" × 48" | |||
| 1/8" | -0.012" to 0.012" | 00000000 | 00000 |
| 1/4" | -0.022" to 0.022" | 00000000 | 00000 |
| 1/2" | -0.036" to 0.036" | 00000000 | 000000 |
| 3/4" | -0.043" to 0.043" | 00000000 | 000000 |
| 1" | -0.049" to 0.049" | 00000000 | 000000 |
Ultra-High-Temperature Arc-Resistant Garolite G-7 Rods
- Color: Off-White
- Temperature Range: -40° F to 425° F
- Tensile Strength: 18,000-27,700 psi (Excellent)
- Impact Strength: 6.5-19.1 ft.-lbs./in. (Excellent)
- Hardness: Rockwell M105 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 V-0, MIL-I-24768/17
Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9 rods, they offer better arc resistance in dry environments and a higher level of electrical insulation. These rods are constructed of a silicone resin with fiberglass fabric reinforcement. Garolite G-7 is sometimes called silicone-grade laminate, phenolic, and Bakelite. Use it to fabricate high-frequency telecommunication equipment and parts that require a high tolerance to heat.
For technical drawings and 3-D models, click on a part number.
Composite Material Selector Packs
Includes one piece of each material listed.
For technical drawings and 3-D models, click on a part number.
| Material (Grade) | Dia. | Thick. | Pkg. Qty. | Pkg. | |
| Fiberglass (GPO3), Garolite (CE, G-3, G-7, G-9, G-10, G-11, LE, XX, XXX) | 2" | 1/32" | 10 | 000000 | 000000 |