McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    174 Products
    About Composites
    industrial info icon

    Compare our offering of composites to find the right material for you.

    Easy-to-Machine Garolite LE Sheets and Strips

    Using nothing more than standard high-speed steel tooling, these Garolite LE sheets and strips can be machined into intricate parts. Garolite LE is made of a phenolic resin with a fine-weave linen fabric reinforcement. It is sometimes referred to as industrial laminate, phenolic, and Bakelite.
    Sheet
    Image of Product. Front orientation. Garolite. Easy-to-Machine Garolite LE Sheets and Strips.
    Temp.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    36" × 48"
    Min.
    Max.,
    ° F
    Tensile
    Strength
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/32" Thick (-0.005" to 0.005")
     
    Brown
    Not Rated235Not RatedNot RatedRockwell M100
    (Extra Hard)    		NoMIL-I-24768/15————0000000000000000000000000000000000000000000000000000000000000000000000
     
    1/16" Thick (-0.006" to 0.006")
     
    Brown
    Not Rated2359,040 psi
    (Good)    		1.07Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		———0000000000000000000000000000000000000000000000000000000000000000000
     
    1/8" Thick (-0.008" to 0.008")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/16" Thick (-0.01" to 0.01")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/4" Thick (-0.012" to 0.024")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000000000000000000000000000000000000000000000———0
    Not Rated23511,700 psi
    (Good)    		0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———000000000000000
     
    5/16" Thick (-0.015" to 0.029")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000———0
    Not Rated23511,700 psi
    (Good)    		0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———000000000000000
     
    3/8" Thick (-0.017" to 0.034")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000———0
    Not Rated23511,700 psi
    (Good)    		0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———000000000000000
     
    1/2" Thick (-0.021" to 0.042")
     
    Brown
    Not Rated235Not Rated0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———000000000000000
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000———0
     
    3/4" Thick (-0.027" to 0.054")
     
    Brown
    Not Rated235Not Rated0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———00000000000000000
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000———0
     
    1" Thick (-0.033" to 0.065")
     
    Brown
    Not Rated235Not Rated0.8Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0———0———0———0———00000000000000000
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000———0
     
    1 1/4" Thick (0" to 0.073")
     
    Brown
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000000000000000000———0———0———0
     
    1 1/2" Thick (0" to 0.081")
     
    Brown
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000000000000000000000000000000000———0———0
     
    Strip
    Image of Product. Front orientation. Garolite. Easy-to-Machine Garolite LE Sheets and Strips.
    Temp.
    2" × 48"
    3" × 48"
    Min.
    Max.,
    ° F
    Tensile
    Strength
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    1/16" Thick (-0.006" to 0.006")
     
    Brown
    Not Rated2359,040 psi
    (Good)    		1.07Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		00000000000000000000000000
     
    1/8" Thick (-0.008" to 0.008")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000
     
    3/16" Thick (-0.01" to 0.01")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000
     
    1/4" Thick (-0.012" to 0.024")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000
     
    3/8" Thick (-0.017" to 0.034")
     
    Brown
    Not Rated2359,300 psi
    (Good)    		1.11Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		000000000000000000000000
     
    1/2" Thick (-0.021" to 0.042")
     
    Brown
    Not Rated235Not Rated0.99Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/15UL 94 HB
    		0000000000000000000000000
     

    Easy-to-Machine Garolite LE Rods

    Image of Product. Front orientation. Garolite. Easy-to-Machine Garolite LE Rods.
    These Garolite LE rods are constructed of a phenolic resin with fine-weave linen fabric reinforcement. They can be machined into intricate parts with nothing more than high-speed steel tooling. Garolite LE is sometimes referred to as industrial laminate, phenolic, and Bakelite.
    Temp.,
    ° F
    1 ft.
    4 ft.
    Dia.
    Dia. Tolerance
    Min.
    Max.
    Tensile Strength
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
     
    Black
    1/16"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		———00000000000000
    1/8"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		———00000000000000
    1/4"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		———00000000000000
    3/8"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		———00000000000000
    1/2"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		000000000000000000000000000
    3/4"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    1"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    1 1/4"-0.001" to 0.001"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		0000000000000———0
    1 1/2"-0.003" to 0.003"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		0000000000000———0
    2"-0.003" to 0.003"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		0000000000000———0
    2 1/2"-0.003" to 0.003"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		00000000000000———0
    3"-0.003" to 0.003"-402556,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		YesMIL-I-24768/13UL 94 HB
    		00000000000000———0
     
    Brown
    1/16"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0000000000000
    1/8"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0000000000000
    1/4"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0000000000000
    5/16"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0000000000000
    3/8"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		———0000000000000
    7/16"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		000000000000000000000000
    1/2"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    9/16"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    5/8"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    3/4"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    7/8"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    1"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		0000000000000000000000000
    1 1/8"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    1 1/4"-0.001" to 0.001"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    1 1/2"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    2"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000
    2 1/2"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		000000000000000000000000000
    3"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		000000000000000000000000000
    4"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		000000000000000000000000000
    5"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000000
    6"-0.005" to 0.005"-302356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/13UL 94 HB
    		00000000000000000000000000000
     

    Composite Material Selector Packs

    Image of Product. Front orientation. Garolite. Composite Material Selector Packs.
    Includes one piece of each material listed.
    Dia.
    No. of
    Pieces
    Material Grade
    Each
    1/32" Thick
    2"10GPO3 Fiberglass, Garolite CE, Garolite G-3, Garolite G-7, Garolite G-9, Garolite G-10, Garolite G-11, Garolite LE, Garolite XX, Garolite XXX000000000000
     

    Easy-to-Machine Garolite LE Tubes

    Image of Product. Front orientation. Garolite. Easy-to-Machine Garolite LE Tubes.
    Constructed of a phenolic resin with fine-weave linen fabric reinforcement, these Garolite LE tubes can be machined into intricate parts with nothing more than high-speed steel tooling. Garolite LE is sometimes referred to as industrial laminate, phenolic, and Bakelite.
    Temp.
    40"
    OD
    OD Tolerance
    ID
    ID Tolerance
    Min.
    Max.,
    ° F
    Tensile Strength
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Each
    1/32" Thick Wall (-0.012" to 0.012")
     
    Brown
    1/4"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/1300000000000000
    5/16"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    3/8"-0.005" to 0.005"5/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/16"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    9/16"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    11/16"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    13/16"-0.005" to 0.005"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/16"-0.008" to 0.008"1"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 5/16"-0.008" to 0.008"1 1/4"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    1/16" Thick Wall (-0.012" to 0.012")
     
    Brown
    5/16"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    3/8"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/16"-0.005" to 0.005"5/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1/2"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    5/8"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    3/4"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/8"-0.005" to 0.005"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/8"-0.008" to 0.008"1"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    3/32" Thick Wall (-0.012" to 0.012")
     
    Brown
    3/8"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/16"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1/2"-0.005" to 0.005"5/16"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    9/16"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    15/16"-0.005" to 0.005"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    1/8" Thick Wall (-0.012" to 0.012")
     
    Brown
    1/2"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    5/8"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    3/4"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/8"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1"-0.008" to 0.008"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/4"-0.008" to 0.008"1"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/2"-0.008" to 0.008"1 1/4"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 3/4"-0.008" to 0.008"1 1/2"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    3/16" Thick Wall (-0.012" to 0.012")
     
    Brown
    5/8"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    3/4"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/8"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1"-0.008" to 0.008"5/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/8"-0.008" to 0.008"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    1/4" Thick Wall (-0.012" to 0.012")
     
    Brown
    3/4"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    7/8"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1"-0.008" to 0.008"1/2"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/8"-0.008" to 0.008"5/8"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/4"-0.008" to 0.008"3/4"-0.003" to 0.003"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    1 1/2"-0.008" to 0.008"1"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
    2"-0.008" to 0.008"1 1/2"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/130000000000000
     
    1/2" Thick Wall (-0.012" to 0.012")
     
    Brown
    2 1/2"-0.008" to 0.008"1 1/2"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/1300000000000000
    3"-0.008" to 0.008"2"-0.005" to 0.005"Not Rated2356,000 psi to 15,300 psi
    (Good)    		0.8 to 1.25Not RatedNoMIL-I-24768/1300000000000000
     
    back to top