Lubricant Type Lubricant Type |
|---|
|
For Use On For Use On |
|---|
|
|
About Lubricants
More
Powder and Flake Lubricants
Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity.
Powder lubricants get into hard-to-reach spots, such as locking mechanisms and fastener threads, better than flakes. Lubricant in a can and drum can be used dry or mixed with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity. Lubricant in a tube can be used dry. It has a precision-tip applicator.
Flake lubricants conduct heat and electricity better than powder. Use them dry or mix with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity.
Container | ||||||
|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Each | |
Powder Lubricant | ||||||
| 0.21 oz. | Tube | Graphite | -75° to 700° | Silver | 0000000 | 00000 |
| 1 lbs. | Can | Graphite | -300° to 700° | Silver | 0000000 | 00000 |
| 5 lbs. | Can | Graphite | -300° to 700° | Silver | 0000000 | 00000 |
| 50 lbs. | Drum | Graphite | -300° to 700° | Silver | 0000000 | 000000 |
Flake Lubricant | ||||||
| 16 oz. | Jar | Graphite | -300° to 700° | Silver | 000000 | 00000 |
| 5 lbs. | Can | Graphite | -300° to 700° | Silver | 000000 | 00000 |
Container | |||||||
|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Powder Lubricant | |||||||
| 0.21 oz. | Tube | Graphite | -75° to 700° | Silver | 48 | 00000000 | 0000000 |
| 1 lbs. | Can | Graphite | -300° to 700° | Silver | 12 | 00000000 | 000000 |
| 5 lbs. | Can | Graphite | -300° to 700° | Silver | 4 | 00000000 | 000000 |
Flake Lubricant | |||||||
| 16 oz. | Jar | Graphite | -300° to 700° | Silver | 12 | 00000000 | 000000 |
| 5 lbs. | Can | Graphite | -300° to 700° | Silver | 4 | 00000000 | 000000 |
Solid and Paste Milling, Turning, and Sawing Lubricants
Reduce mess and waste with these easy-to-apply, nonstaining lubricants. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. All resist running and dripping. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free.
Lubricants in a stick are solid and can be applied to cutting surfaces, such as band saw blades and drills bits. Lubricants with graphite are for high-heat applications. Apply to hot surfaces (400° to 850° F), and they melt to coat the surface evenly.
Container | Each | ||||||
|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Additive | Lg. | Dia. | Compatible With | Each | |
Lubricants | |||||||
| 20.8 | Stick | Graphite | 10" | 2" | Aluminum, Brass, Cast Iron, Copper, Glass, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |