System of Measurement System of Measurement |
|---|
|
Diameter Diameter |
|---|
|
|
|
Shape Shape |
|---|
 |  |
| Rod and Disc | Round Tube |
 | |
| Sheet and Bar |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Electrical Properties Electrical Properties |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
Clarity Clarity |
|---|
 |
| Opaque |
Tensile Strength Tensile Strength |
|---|
|
Performance Properties Performance Properties |
|---|
|
Flexibility Flexibility |
|---|
 | Semi-Rigid |
 | Rigid |
Hardness Hardness |
|---|
|
Backing Type Backing Type |
|---|
 | Plain |
About Composites
More
About Plastic
More
About Copper, Brass, and Bronze
More
High-Temperature Graphite-Filled
841 Bearing Bronze Rods
- Yield Strength: 8,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
| Dia. | Tolerance Rating | Lg. | Each | |
| 1/4" | Oversized | 2" | 000000 | 00000 |
| 3/8" | Oversized | 2" | 000000 | 0000 |
| 1/2" | Oversized | 4" | 000000 | 00000 |
| 5/8" | Oversized | 4" | 000000 | 00000 |
| 3/4" | Oversized | 4" | 000000 | 00000 |
| 7/8" | Oversized | 4" | 000000 | 00000 |
| 1" | Oversized | 4" | 000000 | 00000 |
| 1 1/8" | Oversized | 4" | 000000 | 00000 |
| 1 1/4" | Oversized | 4" | 000000 | 00000 |
| 1 1/2" | Oversized | 4" | 0000000 | 00000 |
| 1 3/4" | Oversized | 4" | 0000000 | 00000 |
| 2" | Oversized | 4" | 0000000 | 00000 |
High-Temperature Graphite-Filled
841 Bearing Bronze Tubes
- Yield Strength: 8,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
4" Lg. | ||||
|---|---|---|---|---|
| OD | Tolerance Rating | ID | Each | |
3/16" Wall Thick. | ||||
| 1" | Oversized | 5/8" | 0000000 | 000000 |
| 1 1/4" | Oversized | 3/4" | 0000000 | 00000 |
1/4" Wall Thick. | ||||
| 1" | Oversized | 1/2" | 0000000 | 00000 |
| 1 1/8" | Oversized | 5/8" | 0000000 | 00000 |
| 1 1/2" | Oversized | 1" | 0000000 | 00000 |
| 1 3/4" | Oversized | 1 1/4" | 0000000 | 00000 |
| 2" | Oversized | 1 1/2" | 0000000 | 00000 |
3/8" Wall Thick. | ||||
| 1 1/2" | Oversized | 3/4" | 0000000 | 00000 |
| 1 3/4" | Oversized | 1" | 0000000 | 00000 |
| 2" | Oversized | 1 1/4" | 0000000 | 00000 |
| 2 3/4" | Oversized | 2" | 0000000 | 00000 |
1/2" Wall Thick. | ||||
| 2" | Oversized | 1" | 0000000 | 00000 |
Carbon-Filled Wear- and
Chemical-Resistant Slippery PTFE
- Color: Gray
- Temperature Range: -325° to 500° F
- Tensile Strength: 1,000 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Durometer 60D-70D (Medium)
- For Use Outdoors: Yes
Filled with carbon and graphite, these naturally slippery PTFE sheets stand up to wear better than standard PTFE. Often fabricated into wear rings, wear pads, and rotational bearings, they resist expanding and maintain their strength when exposed to heat.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Each | |
12" × 12" | |||
|---|---|---|---|
| 3/16" | 0" to 0.019" | 0000000 | 0000000 |
| 1/4" | 0" to 0.025" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
24" × 24" | |||
| 3/16" | 0" to 0.019" | 0000000 | 000000 |
| 1/4" | 0" to 0.025" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 00000000 |
36" × 36" | |||
| 3/16" | 0" to 0.019" | 0000000 | 000000 |
| 1/4" | 0" to 0.025" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 00000000 |
| 1" | 0" to 0.1" | 0000000 | 00000000 |
Slippery Conductive Garolite CE
- Color: Black
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M90 (Hard)
- For Use Outdoors: No
Graphite is added to these Garolite CE sheets to provide a slippery surface that reduces friction. The graphite also makes them conductive. Often used for bearings and wear pads, they're constructed of a phenolic resin with cotton fabric reinforcement. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| Thick. | Thick. Tolerance | Each | |
12" × 12" | |||
|---|---|---|---|
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 00000 |
| 1/2" | 0" to 0.05" | 0000000 | 00000 |
| 3/4" | 0" to 0.075" | 0000000 | 00000 |
| 1" | 0" to 0.1" | 0000000 | 00000 |
18" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
39" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
Conductive Graphite Rods
- Color: Black
- Max. Temperature: 800° F
- Tensile Strength: 5,500 psi
- Electrical Properties: Conductive
- Surface Resistivity: See table
A low surface resistivity makes this graphite a good electrical conductor. Since this graphite won't adhere to metal, it can be used to fabricate furnace parts, crucibles, and ingot molds.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Max. Temperature in a Vacuum, °F | Grain Size | Surface Resistivity | Each | |
6" Lg. | ||||||
|---|---|---|---|---|---|---|
| 1/16" | 0.00" to 0.02" | 5000° | 0.0004" | 8.8 × 10-3 ohms/sq. | 0000000 | 000000 |
| 3/32" | 0.00" to 0.02" | 5000° | 0.0004" | 5.8 × 10-3 ohms/sq. | 00000000 | 0000 |
| 1/8" | 0.00" to 0.02" | 5000° | 0.0004" | 4.4 × 10-3 ohms/sq. | 00000000 | 0000 |
| 1/4" | 0.00" to 0.02" | 5000° | 0.0004" | 2.2 × 10-3 ohms/sq. | 0000000 | 0000 |
| 5/16" | 0.00" to 0.02" | 5000° | 0.0004" | 1.7 × 10-3 ohms/sq. | 00000000 | 0000 |
| 3/8" | 0.00" to 0.02" | 5000° | 0.0004" | 1.4 × 10-3 ohms/sq. | 00000000 | 00000 |
| 7/16" | 0.00" to 0.02" | 5000° | 0.0004" | 1.2 × 10-3 ohms/sq. | 00000000 | 00000 |
| 1/2" | 0.00" to 0.02" | 5000° | 0.0004" | 1.1 × 10-3 ohms/sq. | 0000000 | 00000 |
| 9/16" | 0.00" to 0.02" | 5000° | 0.0004" | 9.7 × 10-3 ohms/sq. | 00000000 | 00000 |
| 5/8" | 0.00" to 0.02" | 5000° | 0.0004" | 8.8 × 10-3 ohms/sq. | 00000000 | 00000 |
| 3/4" | 0.00" to 0.02" | 5000° | 0.0004" | 7.3 × 10-3 ohms/sq. | 00000000 | 00000 |
| 1" | 0.00" to 0.02" | 5000° | 0.0004" | 5.5 × 10-3 ohms/sq. | 0000000 | 00000 |
| 1 1/4" | 0.00" to 0.02" | 5000° | 0.0004" | 4.4 × 10-3 ohms/sq. | 0000000 | 00000 |
| 1 1/2" | 0.00" to 0.02" | 5000° | 0.0004" | 3.6 × 10-3 ohms/sq. | 0000000 | 00000 |
| 1 3/4" | 0.00" to 0.02" | 5000° | 0.0004" | 3.1 × 10-3 ohms/sq. | 0000000 | 00000 |
| 2" | 0.00" to 0.02" | 5000° | 0.0004" | 2.8 × 10-3 ohms/sq. | 00000000 | 00000 |
12" Lg. | ||||||
| 1/16" | 0.00" to 0.02" | 5000° | 0.0004" | 8.8 × 10-4 ohms/sq. | 0000000 | 00000 |
| 3/32" | 0.00" to 0.02" | 5000° | 0.0004" | 5.8 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1/8" | 0.00" to 0.02" | 5000° | 0.0004" | 4.4 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1/4" | 0.00" to 0.02" | 5000° | 0.0004" | 2.2 × 10-4 ohms/sq. | 0000000 | 00000 |
| 5/16" | 0.00" to 0.02" | 5000° | 0.0004" | 1.7 × 10-4 ohms/sq. | 0000000 | 00000 |
| 3/8" | 0.00" to 0.02" | 5000° | 0.0004" | 1.4 × 10-4 ohms/sq. | 0000000 | 00000 |
| 7/16" | 0.00" to 0.02" | 5000° | 0.0004" | 1.2 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1/2" | 0.00" to 0.02" | 5000° | 0.0004" | 1.1 × 10-4 ohms/sq. | 0000000 | 00000 |
| 9/16" | 0.00" to 0.02" | 5000° | 0.0004" | 9.7 × 10-4 ohms/sq. | 0000000 | 00000 |
| 5/8" | 0.00" to 0.02" | 5000° | 0.0004" | 8.8 × 10-4 ohms/sq. | 0000000 | 00000 |
| 3/4" | 0.00" to 0.02" | 5000° | 0.0004" | 7.3 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1" | 0.00" to 0.02" | 5000° | 0.0004" | 5.5 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1 1/4" | 0.00" to 0.02" | 5000° | 0.0004" | 4.4 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1 1/2" | 0.00" to 0.02" | 5000° | 0.0004" | 3.6 × 10-4 ohms/sq. | 0000000 | 00000 |
| 1 3/4" | 0.00" to 0.02" | 5000° | 0.0004" | 3.1 × 10-4 ohms/sq. | 0000000 | 000000 |
| 2" | 0.00" to 0.02" | 5000° | 0.0004" | 2.8 × 10-4 ohms/sq. | 0000000 | 000000 |
| 2 1/2" | 0.00" to 0.02" | 5000° | 0.0004" | 2.2 × 10-4 ohms/sq. | 0000000 | 000000 |
| 3" | 0.00" to 0.02" | 5000° | 0.0004" | 1.8 × 10-4 ohms/sq. | 0000000 | 000000 |