For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
For Housing ID For Housing ID |
|---|
ID ID |
|---|
OD OD |
|---|
For Load Direction For Load Direction |
|---|
 |  |
| Radial | Combined Radial and Thrust |
 | |
| Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
|
About Plain Bearings
More
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Embedded
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
| 1/4" | 1/8" | 25 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 1/4" | 1/4" | 50 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 1/4" | 3/8" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
For 3/16" Shaft Dia. | ||||||
| 1/4" | 1/4" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 1/4" | 3/8" | 110 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 1/4" | 1/2" | 150 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 1/4" | 5/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/16" | 1/4" | 75 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 5/16" | 3/8" | 110 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 5/16" | 1/2" | 150 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
For 1/4" Shaft Dia. | ||||||
| 5/16" | 1/4" | 100 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 5/16" | 1/2" | 200 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/16" | 3/4" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 1/4" | 100 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 3/8" | 150 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 1/2" | 200 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/8" | 5/8" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/8" | 7/8" | 350 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/8" | 1" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 1/2" | 200 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 3/4" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 1" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 5/16" Shaft Dia. | ||||||
| 3/8" | 1/4" | 125 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 3/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 1/2" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 5/8" | 310 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/16" | 1/4" | 125 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 7/16" | 3/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/16" | 1/2" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/16" | 5/8" | 310 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/16" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/16" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 3/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 1/2" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 1 1/4" | 620 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 3/8" Shaft Dia. | ||||||
| 1/2" | 1/4" | 150 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 1/2" | 3/8" | 225 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 1/2" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 5/8" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 3/4" | 450 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 7/8" | 520 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1/2" | 1" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1/2" | 1 1/4" | 750 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 3/8" | 225 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 1/2" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 3/4" | 450 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 1" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 1 1/4" | 750 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 1/2" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 5/8" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 3/4" | 450 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
For 7/16" Shaft Dia. | ||||||
| 9/16" | 1/2" | 350 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 5/8" | 430 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 1" | 700 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 9/16" | 1 1/4" | 870 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 1/2" | 350 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 3/4" | 520 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 1" | 700 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
| 5/8" | 3/8" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 9/16" | 450 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 3/4" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 7/8" | 700 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1" | 800 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1 1/8" | 900 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 5/8" | 1 1/4" | 1,000 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1 1/2" | 1,200 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 11/16" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 11/16" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 11/16" | 3/4" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 11/16" | 1" | 800 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 11/16" | 1 1/8" | 900 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 3/8" | 300 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 5/8" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 3/4" | 600 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1" | 800 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1 1/8" | 900 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 1 1/4" | 1,000 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1,200 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 1" | 800 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 9/16" Shaft Dia. | ||||||
| 3/4" | 1/2" | 450 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 3/4" | 670 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 1" | 900 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 1 1/4" | 1,100 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 5/8" Shaft Dia. | ||||||
| 3/4" | 1/2" | 500 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 5/8" | 620 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 3/4" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 7/8" | 870 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 1" | 1,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1 1/8" | 1,100 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/4" | 1 1/4" | 1,250 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 13/16" | 1/2" | 500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 13/16" | 3/4" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 13/16" | 1" | 1,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/8" | 5/8" | 620 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/8" | 3/4" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1" | 1,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1 1/2" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/8" | 1 3/4" | 1,750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 1/2" | 500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 3/4" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 2" | 2,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
| 7/8" | 1/2" | 600 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/8" | 5/8" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/8" | 3/4" | 900 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1" | 1,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1 1/4" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 7/8" | 1 1/2" | 1,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 15/16" | 1 1/2" | 1,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 15/16" | 2" | 2,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 1/2" | 600 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 5/8" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 3/4" | 900 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 7/8" | 1,050 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 1" | 1,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 1 1/4" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 1 1/2" | 1,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1" | 1 3/4" | 2,100 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1" | 2" | 2,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/8" | 1 1/2" | 1,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/4" | 1" | 1,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 7/8" Shaft Dia. | ||||||
| 1" | 1 1/2" | 2,100 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/8" | 3/4" | 1,050 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 1/8" | 1" | 1,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 1/8" | 1 1/4" | 1,750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 1/8" | 2" | 2,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1" Shaft Dia. | ||||||
| 1 1/8" | 1" | 1,600 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1/2" | 800 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 3/4" | 1,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1" | 1,600 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1 1/4" | 2,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1 1/2" | 2,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 2" | 3,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 1 1/4" | 2 1/4" | 3,600 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/4" | 2 1/2" | 4,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/4" | 3" | 4,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 3/8" | 1" | 1,600 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 3/8" | 1 1/2" | 2,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/2" | 2" | 3,200 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/2" | 3" | 4,800 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 1/8" Shaft Dia. | ||||||
| 1 3/8" | 1" | 1,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 3/8" | 1 1/2" | 2,700 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1 3/16" Shaft Dia. | ||||||
| 1 1/2" | 1" | 1,900 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 1/2" | 1 1/2" | 2,850 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/2" | 2" | 3,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/2" | 2 1/2" | 4,750 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||
| 1 1/2" | 3/4" | 1,500 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 1/2" | 1" | 2,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 1 1/4" | 2,500 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 1 1/2" | 3,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 2" | 4,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 1 1/2" | 2 1/2" | 5,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 1/2" | 3" | 6,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 5/16" Shaft Dia. | ||||||
| 1 5/8" | 2 1/2" | 5,250 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 3/8" Shaft Dia. | ||||||
| 1 5/8" | 1" | 2,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 5/8" | 1 1/2" | 3,300 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 5/8" | 2" | 4,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 5/8" | 3" | 6,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1/2" | 1,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 3/4" | 1" | 2,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 1 3/4" | 1 1/4" | 3,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 1 3/4" | 1 1/2" | 3,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 1 3/4" | 1 3/4" | 4,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 1 3/4" | 2" | 4,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 3/4" | 2 1/2" | 6,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 3/4" | 3" | 7,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 1 7/8" | 2" | 4,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2" | 2" | 4,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2" | 2 1/2" | 6,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2" | 3" | 7,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||
| 2" | 1" | 2,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 2" | 1 1/2" | 4,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2" | 2" | 5,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2" | 3" | 8,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 2" Shaft Dia. | ||||||
| 2 1/4" | 2" | 6,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 1/4" | 2 1/2" | 8,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/8" | 1 1/8" | 3,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/8" | 1 1/2" | 4,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/8" | 2" | 6,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/8" | 3" | 9,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/8" | 4" | 12,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 1/2" | 2" | 6,400 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 1/2" | 2 1/2" | 8,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 1/2" | 3" | 9,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 2 1/4" Shaft Dia. | ||||||
| 2 3/4" | 2" | 7,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 2 3/4" | 3" | 10,800 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 2 1/2" Shaft Dia. | ||||||
| 3" | 4" | 16,000 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
For 3" Shaft Dia. | ||||||
| 3 1/2" | 4" | 19,200 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 000000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
SAE 841 Bronze
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||
|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||||
| 5/16" | 1/2" | 7/16" | 1/16" | 150 lbs. @ 120 rpm | 195 lbs. @ 120 rpm | -50° to 700° | 0000000 | 00000 |
For 1/4" Shaft Dia. | ||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 100 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 150 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 200 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 300 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
For 5/16" Shaft Dia. | ||||||||
| 7/16" | 3/8" | 9/16" | 1/16" | 185 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 7/16" | 1/2" | 9/16" | 1/16" | 250 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 7/16" | 3/4" | 9/16" | 1/16" | 370 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
For 3/8" Shaft Dia. | ||||||||
| 1/2" | 1/4" | 11/16" | 1/16" | 150 lbs. @ 120 rpm | 410 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 1/2" | 1/2" | 11/16" | 1/16" | 300 lbs. @ 120 rpm | 410 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 1/2" | 3/4" | 11/16" | 1/16" | 450 lbs. @ 120 rpm | 410 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1/2" | 7/8" | 1/16" | 300 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/16" | 450 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1" | 7/8" | 1/16" | 600 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
For 7/16" Shaft Dia. | ||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 350 lbs. @ 120 rpm | 350 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 9/16" | 3/4" | 11/16" | 1/16" | 520 lbs. @ 120 rpm | 350 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 520 lbs. @ 120 rpm | 650 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
For 1/2" Shaft Dia. | ||||||||
| 5/8" | 3/8" | 7/8" | 1/8" | 300 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1/2" | 7/8" | 1/8" | 400 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 600 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 5/8" | 1" | 7/8" | 1/8" | 800 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1/2" | 1" | 1/8" | 400 lbs. @ 120 rpm | 750 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/4" | 3/4" | 1" | 1/8" | 600 lbs. @ 120 rpm | 750 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1" | 1" | 1/8" | 800 lbs. @ 120 rpm | 750 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
For 5/8" Shaft Dia. | ||||||||
| 3/4" | 5/8" | 1" | 1/8" | 620 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 3/4" | 3/4" | 1" | 1/8" | 750 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 3/4" | 1" | 1" | 1/8" | 1,000 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1/2" | 1 1/8" | 1/8" | 500 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 5/8" | 1 1/8" | 1/8" | 620 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 750 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1" | 1 1/8" | 1/8" | 1,000 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,250 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||
| 7/8" | 1/2" | 1 1/8" | 1/8" | 600 lbs. @ 60 rpm | 880 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 900 lbs. @ 60 rpm | 880 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1" | 5/8" | 1 1/4" | 3/16" | 750 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1" | 3/4" | 1 1/4" | 3/16" | 900 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1" | 1" | 1 1/4" | 3/16" | 1,200 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1" | 1 1/4" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 7/8" Shaft Dia. | ||||||||
| 1 1/8" | 3/4" | 1 1/2" | 1/8" | 1,050 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/8" | 1" | 1 1/2" | 1/8" | 1,400 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/8" | 1 1/4" | 1 1/2" | 1/8" | 1,750 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||||
| 1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,200 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1" | 1 1/2" | 1/8" | 1,600 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 2,000 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 2,400 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||||
| 1 1/2" | 1" | 1 3/4" | 3/16" | 2,000 lbs. @ 30 rpm | 1,850 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 1 1/4" | 1 3/4" | 3/16" | 2,500 lbs. @ 30 rpm | 1,850 lbs. @ 30 rpm | -50° to 700° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/4" | 3/16" | 3,000 lbs. @ 30 rpm | 1,850 lbs. @ 30 rpm | -50° to 700° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||||
| 1 3/4" | 1 1/2" | 2" | 3/16" | 3,600 lbs. @ 30 rpm | 2,150 lbs. @ 30 rpm | -50° to 700° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | ||||||||
| 2 1/4" | 2 1/2" | 3" | 1/4" | 7,000 lbs. @ 30 rpm | 7,450 lbs. @ 30 rpm | -50° to 700° | 0000000 | 00000 |
High-Temperature Dry-Running Thrust Bearings
841 Bronze
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite. They handle higher temperatures than 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | |||||
|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||
| 5/8" | 1/16" | 410 lbs. @ 120 rpm | -50° to 700° | 000000 | 00000 |
For 3/8" Shaft Dia. | |||||
| 3/4" | 1/16" | 530 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
| 3/4" | 1/8" | 530 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
For 1/2" Shaft Dia. | |||||
| 3/4" | 1/16" | 390 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
| 1" | 1/16" | 750 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
| 1" | 3/32" | 750 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
| 1" | 1/8" | 750 lbs. @ 120 rpm | -50° to 700° | 000000 | 0000 |
For 9/16" Shaft Dia. | |||||
| 1 1/4" | 1/16" | 1,550 lbs. @ 60 rpm | -50° to 700° | 000000 | 0000 |
| 1 1/4" | 1/8" | 1,550 lbs. @ 60 rpm | -50° to 700° | 000000 | 0000 |
For 5/8" Shaft Dia. | |||||
| 1" | 1/16" | 760 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1" | 1/8" | 760 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 3/16" | 1/16" | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 3/16" | 3/32" | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 3/16" | 1/8" | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1/16" | 1,450 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 3/4" Shaft Dia. | |||||
| 1 1/4" | 1/16" | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/4" | 1/8" | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 3/8" | 1/8" | 1,650 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 9/16" | 3/32" | 2,350 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 3/4" | 1/8" | 2,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 7/8" Shaft Dia. | |||||
| 1 1/2" | 1/16" | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||
| 1 1/2" | 1/16" | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 1 1/2" | 1/8" | 1,550 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
| 2" | 1/8" | 3,000 lbs. @ 60 rpm | -50° to 700° | 0000000 | 0000 |
For 1 1/4" Shaft Dia. | |||||
| 2" | 1/16" | 3,050 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |
| 2" | 1/8" | 3,050 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |
For 1 1/2" Shaft Dia. | |||||
| 2 1/2" | 1/8" | 5,000 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |
| 3 1/2" | 3/16" | 11,400 lbs. @ 30 rpm | -50° to 700° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||
| 2 5/8" | 1/8" | 4,800 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |
For 2" Shaft Dia. | |||||
| 3" | 1/8" | 6,250 lbs. @ 30 rpm | -50° to 700° | 0000000 | 0000 |