These switches detect magnetic objects—or objects with a magnet attached—through non-magnetic walls.

With a smaller diameter and shorter length than standard sized switches, these fit in the most space-constrained areas.

These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).

Sense objects from farther away than with other DC proximity switches that have the same diameter.

Check the position of your torch or workpiece for accuracy during robotic welding.

Sense objects as they pass through the switch’s ring via tubing or a funnel. These switches are often used to monitor blockages, detect breaks in spooling wire, or count small metallic parts, such as screws, during the stamping process.

About half the length of our other flat-body proximity switches, these switches fit in crowded spaces and along rails.

These inductive proximity switches sense metallic objects each time they pass through the slot, even when they’re obscured by water, oil, dirt, or a surface finish. Use them to measure the speed of rotating equipment and to count or detect moving objects, such as sheet metal being fed into a stamping process.

These intrinsically safe switches detect objects as they’re routed through the ring. They produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks. Switches are ATEX certified to protect against explosion.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.

Switches accept both AC and DC input voltage.

These switches sense when a valve is open or closed, supporting flow and temperature control within your system and offering reliable feedback.

Mounted to your circuit board, these switches trigger when magnetic components get near, and reset as they move away.

Use a free, downloadable app with these switches to automate alarms in your facility, such as sounding a buzzer if a trailer door is opened after a certain time.

Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.