McMaster-Carr logo
    Filter by
    Face Shape
    DFARS Specialty Metals
    Face Replaceable
    Handle Replaceable
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Handle Core Material
    Face Thread Type
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    300 Products

    Mallets

    Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Rubber FaceAbout Rubber Face
    Image of Product. Style A. Front orientation. Style A. Mallets .

    Style A

    Image of Product. Style B. Front orientation. Style B. Mallets .

    Style B

    Rubber faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Fiberglass Handle—Fiberglass handles combine the strength of steel with the vibration resistance of wood.
    White Face—White SBR faces are nonmarking.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.
    Textured Grip—Textured grips provide slip resistance.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Black Face
    White Face
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness
    Rating
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Fiberglass Handle
    A11 3/4"Soft12 1/2"TexturedYes000000000000———0
    A22 3/8"Soft15 3/4"TexturedYes00000000000———0
    B12"Medium Soft13"TexturedNo———0000000000000
     
    SBR FaceAbout SBR Face
    Image of Product. Style B. Front orientation. Style B. Mallets .

    Style B

    Image of Product. Style C. Front orientation. Style C. Mallets .

    Style C

    SBR faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Fiberglass Handle—Fiberglass handles combine the strength of steel with the vibration resistance of wood.
    White Face—White SBR faces are nonmarking.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Black Face
    White Face
    Style
    Head Wt.
    Face
    Dia.
    Face Hardness
    Rating
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Hickory Handle
    C7 oz.1 5/8"Soft12 1/2"PlainNo000000000000000000000000
    C13 oz.2 1/4"Soft12 1/2"PlainNo0000000000000000000000
    C1 5/8 lb.2 1/4"Soft14"PlainNo0000000000000000000000
    C1 7/8 lb.2 1/2"Soft15 1/2"PlainNo0000000000000000000000
    C2 1/4 lb.2 1/2"Soft16"PlainNo0000000000000000000000
    C3 5/8 lb.3 1/8"Soft16 1/2"PlainNo0000000000000000000000
     
    Fiberglass Handle
    B13 oz.2 1/8"Soft12 1/2"PlainNo———0000000000000
    B1 7/8 lb.2 1/2"Soft15 1/2"PlainNo———0000000000000
    B2 1/4 lb.2 1/2"Soft16"PlainNo000000000000———0
    B3 5/8 lb.3 1/8"Soft16 1/2"PlainNo000000000000———0
     
    Polyethylene Face
    Image of Product. Style D. Front orientation. Style D. Mallets .

    Style D

    Polyethylene faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Medium-Hard Face—Medium-hard faces have a hardness similar to that of a cutting board.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Yellow Face
    Style
    Head Wt.,
    oz.
    Face
    Dia.
    Face Hardness
    Rating
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Hickory Handle
    D51 1/4"Medium Hard10 3/4"PlainNo000000000000
    D71 1/2"Medium Hard10 3/4"PlainNo00000000000
    D81 3/4"Medium Hard10 3/4"PlainNo00000000000
    D121 3/4"Medium Hard13 1/2"PlainNo00000000000
     
    Rawhide Leather Face
    Image of Product. Style D. Front orientation. Style D. Mallets .

    Style D

    Rawhide faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.
    Lead Head—Lead heads deliver a heavier, more balanced blow than standard rawhide heads.
    Hickory Handle—Hickory handles resist vibration.
    Cannot Be Sold To—Mallets cannot be sold to the listed areas due to import regulations.
    Style
    Head Wt.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Cannot Be
    Sold To
    Each
    Rawhide Leather Head with Hickory Handle
    D2 oz.1"8"PlainYesCanada0000000000000
    D4 oz.1 1/4"9 1/4"PlainYesCanada000000000000
    D6 oz.1 1/2"10"PlainYesCanada000000000000
    D9 oz.1 3/4"11 1/2"PlainYesCanada000000000000
    D11 oz.2"11 3/4"PlainYesCanada000000000000
    D1 3/8 lb.2 3/4"13 1/2"PlainYesCanada000000000000
    D1 1/2 lb.2 3/4"13 1/2"PlainYesCanada0000000000000
     
    Rawhide Leather-Lined Lead Head with Hickory Handle
    D8 oz.1 1/4"9 1/4"PlainYesCanada000000000000
    D12 oz.1 1/2"9 1/2"PlainYesCanada000000000000
    D1 lb.1 3/4"11 1/2"PlainYesCanada000000000000
    D1 1/4 lb.2"11 3/4"PlainYesCanada0000000000000
    D2 1/2 lb.2 3/4"13 1/2"PlainYesCanada0000000000000
     
    Hickory Face
    Image of Product. Style D. Front orientation. Style D. Mallets .

    Style D

    Hickory faces are a good choice for light sheet metal work and striking wood.
    Hickory Handle—Hickory handles resist vibration.
    Style
    Head Wt.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Hickory Handle
    D6 oz.1 3/8"11"PlainNo0000000000000
    D10 oz.2"13"PlainNo000000000000
    D14 oz.2 1/4"13"PlainNo000000000000
    D1 lb.2 1/2"13"PlainNo000000000000
    D1 1/8 lb.2 3/4"13 1/4"PlainNo000000000000
    D1 3/8 lb.3"13 1/2"PlainNo000000000000
     
    Lead Face
    Image of Product. Style E. Front orientation. Style E. Mallets .

    Style E

    Image of Product. Style F. Front orientation. Style F. Mallets .

    Style F

    Image of Product. Style G. Front orientation. Style G. Mallets .

    Style G

    Lead faces are the softest metal faces we offer. They're for use on plastic and soft, nonferrous metal, such as copper and aluminum.
    Lead Head—Lead heads deliver a heavier, more balanced blow than standard rawhide heads.
    Hickory Handle—Hickory handles resist vibration.
    Steel Handle—Steel handles are stronger than hickory handles but have less vibration resistance.
    Style
    Head Wt.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Hickory Handle
    E12 oz.7/8"9 1/2"PlainNo000000000000
    E1 1/2 lb.1 1/4"12"PlainNo00000000000
    E2 1/2 lb.1 1/2"12 1/2"PlainNo00000000000
    E4 1/2 lb.2"14"PlainNo00000000000
     
    Steel Handle
    F1 lb.3/4"11"SmoothNo000000000000
    F2 lb.1 3/16"11"SmoothNo000000000000
    F3 lb.1 1/4"11"SmoothNo000000000000
    F5 lb.1 3/4"11"SmoothNo000000000000
    F6 lb.2"11"SmoothNo000000000000
    G4 lb.1 3/8"11"SmoothNo000000000000
     
    Aluminum FaceAbout Aluminum Face
    Image of Product. Style H. Front orientation. Style H. Mallets .

    Style H

    Aluminum faces are harder than lead and softer than brass. Use them on brass, copper, aluminum, and steel.
    Aluminum Handle—Aluminum handles are stronger than hickory handles but have less vibration resistance.
    Textured Grip—Textured grips provide slip resistance.
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Aluminum Handle
    H11 1/4"10 3/4"TexturedNo000000000000
    H1 1/21 7/8"11"TexturedNo00000000000
    H22"12 3/4"TexturedNo00000000000
    H32 1/2"14 3/4"TexturedNo00000000000
     
    Copper Face
    Image of Product. Style J. Front orientation. Style J. Mallets .
    Image of Product. Style K. Front orientation. Style K. Mallets .

    Style J

    Style K

    Copper faces are harder than lead and softer than brass. Use them on brass, copper, aluminum, and steel.
    Hickory Handle—Hickory handles resist vibration.
    Textured Grip—Textured grips provide slip resistance.
    Mallets
    Replacement
    Handles
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Hickory Handle
    J41 5/8"16"TexturedYes000000000000000000000000000
    K2 1/21 1/4"15"TexturedYes0000000000000000000000000
     
    Brass Face
    Image of Product. Style J. Front orientation. Style J. Mallets .
    Image of Product. Style L. Front orientation. Style L. Mallets .
    Image of Product. Style M. Front orientation. Style M. Mallets .
    Image of Product. Style N. Front orientation. Style N. Mallets .

    Style J

    Style L

    Style M

    Style N

    Brass faces are suitable for striking steel, iron, and stone.
    Hickory Handle—Hickory handles resist vibration.
    Steel Handle—Steel handles are stronger than hickory handles but have less vibration resistance.
    Aluminum Handle—Aluminum handles are stronger than hickory handles but have less vibration resistance.
    Fiberglass Handle—Fiberglass handles combine the strength of steel with the vibration resistance of wood.
    Textured Grip—Textured grips provide slip resistance.
    Ribbed Grip—Ribbed grips provide slip resistance.
    Mallets
    Replacement
    Handles
    Style
    Head Wt.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Hickory Handle
    J8 oz.13/16"10"TexturedYes00000000000000000000000000
    J1 lb.1"12"TexturedYes000000000000000000000000
    J2 lb.1 1/2"14"TexturedYes000000000000000000000000
    J3 lb.1 5/8"14"TexturedYes000000000000000000000000
    J4 lb.1 3/4"16"TexturedYes0000000000000000000000000
    J5 lb.1 7/8"16"TexturedYes0000000000000000000000000
     
    Steel Handle
    L1 lb.15/16"10"TexturedNo0000000000000———0
    L2 lb.1 1/4"13"TexturedNo0000000000000———0
    L3 lb.1 1/4"13"TexturedNo00000000000000———0
    L4 lb.1 3/4"15"TexturedNo00000000000000———0
    L5 lb.1 7/8"15"TexturedNo00000000000000———0
     
    Aluminum Handle
    M4 oz.3/4"5 1/2"SmoothNo00000000000———0
    M10 oz.15/16"7 1/4"SmoothNo00000000000———0
    M1 lb.1 1/8"9 1/4"TexturedNo00000000000———0
    M1 1/4 lb.1 1/4"10"TexturedNo00000000000———0
    M2 lb.1 1/2"10 1/2"TexturedNo00000000000———0
    M3 lb.1 3/4"12 1/4"TexturedNo00000000000———0
     
    Fiberglass Handle
    N1 1/2 lb.1"12"RibbedYes000000000000———0
    N2 1/2 lb.1 1/4"12"RibbedYes000000000000———0
    N4 lb.1 5/8"12"RibbedYes0000000000000———0
     
    Bronze Face
    Image of Product. Style K. Front orientation. Style K. Mallets .
    Image of Product. Style P. Front orientation. Style P. Mallets .

    Style K

    Style P

    Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.
    Hickory Handle—Hickory handles resist vibration.
    Textured Grip—Textured grips provide slip resistance.
    Ribbed Grip—Ribbed grips provide slip resistance.
    Mallets
    Replacement
    Handles
    Rectangular
    Face
    Style
    Head Wt.
    Face
    Dia.
    Round Face
    Dia.
    Lg.
    Wd.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Round Face with Hickory Handle
    K8 oz.1"———10 1/2"PlainYes0000000000000———0
    K1 lb.1"———12 1/2"TexturedYes000000000000———0
     
    Round × Rectangular Face with Hickory Handle
    P12 oz.—13/16"3/8"3/8"11"RibbedYes00000000000000000000000000
    P1 1/4 lb.—1"1/2"1/2"12"RibbedYes0000000000000000000000000
    P1 1/2 lb.—1 1/8"5/8"5/8"13"RibbedYes0000000000000000000000000
     

    High-Visibility Dead Blow Mallets

    A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface. Choose a lighter weight mallet for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.
    Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. High-Visibility Dead Blow Mallets .
    Polyurethane rubber faces resist oils and solvents and won't crack under high impact. They're softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Head Wt.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head Material
    Handle Color
    Handle
    Replaceable
    Each
    Polyurethane Rubber Handle with Steel Core—Textured Grip
    5 oz.7/8"Medium (Fluorescent Orange)9 1/2"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
    10 oz.1 1/4"Soft (Fluorescent Orange)10 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    14 oz.1 1/4"Medium (Fluorescent Orange)10 1/2"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    15 oz.1 1/4"Soft (Fluorescent Orange)10 1/2"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    1 1/8 lb.1 1/2"Medium (Fluorescent Orange)12 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    1 1/8 lb.1 5/8"Soft (Fluorescent Orange)11 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    1 5/16 lb.1 1/2"Medium (Fluorescent Orange)13"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    1 3/8 lb.1 1/2"Soft (Fluorescent Orange)11 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    1 3/4 lb.2"Soft (Fluorescent Orange)12 7/8"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    2 5/8 lb.2 1/8"Soft (Fluorescent Orange)14 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    3 1/4 lb.2 1/2"Soft (Fluorescent Orange)15 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    5 lb.2 7/8"Soft (Fluorescent Orange)19 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
     
    Round Brass Face
    Image of Product. Front orientation. Hammers. High-Visibility Dead Blow Mallets .
    Brass faces are suitable for striking steel, iron, and stone.
    Head Wt.,
    lb.
    Face Dia.
    Overall
    Lg.
    Head Material
    Handle Color
    Handle
    Replaceable
    Each
    Polyurethane Rubber Handle with Steel Core—Textured Grip
    1 1/21 3/4" 1 1/4"13"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
     

    Dead Blow Mallets

    The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. All have a textured or ribbed grip for slip resistance.
    Round PVC Face
    Image of Product. Front orientation. Hammers. Dead Blow Mallets , Round PVC Face, Fiberglass Handle with Ribbed Grip.

    Fiberglass Handle with

    Ribbed Grip

    Image of Product. Front orientation. Hammers. Dead Blow Mallets , Round PVC Face, Textured Grip.

    Textured Grip

    PVC faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    PVC Handle—PVC handles with steel core resist breakage if you miss your mark.
    Fiberglass Handle—Fiberglass handles combine high strength with good vibration resistance.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Head Wt.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Color
    Handle
    Replaceable
    Each
    PVC Handle with Steel Handle Core—Textured Grip
    8 oz.1 5/8"Soft (Black)10 3/4"PVC
    		BlackNo0000000000000
    1 lb.1 3/4"Soft (Black)12"PVC
    		BlackNo000000000000
    1 1/2 lb.1 7/8"Soft (Black)13"PVC
    		BlackNo000000000000
    2 lb.2 1/8"Soft (Black)13 1/2"PVC
    		BlackNo000000000000
    3 lb.2 7/8"Soft (Black)14"PVC
    		BlackNo000000000000
    4 lb.2 5/8"Soft (Black)14 3/4"PVC
    		BlackNo000000000000
     
    Fiberglass Handle with Ribbed Grip
    2 lb.2"Hard (Black)14"PVC
    		BlackNo000000000000
    2 3/4 lb.2 3/8"Hard (Black)14 1/4"PVC
    		BlackNo000000000000
    3 3/8 lb.2 5/8"Hard (Black)15 1/4"PVC
    		BlackNo000000000000
     

    Replaceable-Face Mallets

    Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Press-Fit Nylon Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Nylon Face, Plain Grip.

    Plain Grip

    Nylon faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Ash Handle—Ash handles resist vibration.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Mallets
    Replacement
    Hammer Faces
    Head Wt.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Ash Handle with Plain Grip
    6 oz.1"Hard (White)11"ZincYes0000000000000000000000000
    11 oz.1 1/4"Hard (White)10 1/2"ZincYes00000000000000000000000
    15 oz.1 1/2"Hard (White)13"ZincYes00000000000000000000000
    1 7/8 lb.2"Hard (White)13 1/2"ZincYes000000000000000000000000
     
    Hickory Handle with Plain Grip
    2 lb.2"Hard (White)14 1/2"SteelYes00000000000000000000000
    3 3/8 lb.—Hard (White)14 1/4"SteelYes0000000000000000000000000
     
    Screw-In Polyethylene Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Screw-In Polyethylene Face, Hickory Handle with Plain Grip.
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Screw-In Polyethylene Face, Smooth Grip.

    Hickory Handle with

    Plain Grip

    Smooth Grip

    Polyethylene faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Acetal Handle—Acetal handles are lightweight.
    Hickory Handle—Hickory handles resist vibration.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Mallets
    Replacement
    Hammer Faces
    Face
    Head
    Wt.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Acetal Handle—Smooth Grip
    2 oz.5/8"Extra Hard (Yellow)1/4"-20
    		UNC
    		8 1/4"SteelNo0000000000000000000000000
    4 oz.7/8"Extra Hard (Yellow)5/16"-18
    		UNC
    		9 1/4"SteelNo00000000000000000000000
     
    Hickory Handle with Plain Grip
    7 oz.1"Extra Hard (Yellow)7/16"-14
    		UNC
    		10 1/4"SteelNo0000000000000000000000
    8 oz.1 1/4"Extra Hard (Yellow)7/16"-14
    		UNC
    		12"SteelNo00000000000000000000000
    1 lb.1 1/4"Extra Hard (Yellow)7/16"-14
    		UNC
    		12"SteelNo00000000000000000000000
    2 lb.1 3/4"Extra Hard (Yellow)1/2"-13
    		UNC
    		12 3/4"SteelNo00000000000000000000000
     
    Screw-In Acetal × Brass Faces
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Round Face, Acetal Face, Screw-In Face, Plain Grip.

    Plain Grip

    Mallets with two face materials can be used for a wider range of applications than other mallets.
    Acetal faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Brass faces are harder than copper and suitable for striking steel, iron, stone, and other hard surfaces.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Mallets
    Replacement
    Face Sets
    Face
    Head Wt.,
    oz.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Maple Handle with Plain Grip
    41/2" 1/2"Extra Hard (Black)5/8"-32
    		UN
    		9"Aluminum
    		No00000000000000000000000000
     
    Press-Fit Surlyn × Kraton Faces
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Surlyn × Kraton Faces, Hickory Handle with Plain Grip.

    Hickory Handle with

    Plain Grip

    Mallets with two face materials can be used for a wider range of applications than other mallets.
    Surlyn and kraton faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Head Wt.,
    oz.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Hickory Handle with Plain Grip
    61"Hard (Yellow) × Medium Soft (Red)10 1/2"SteelYes0000000000000
    121 3/8" Hard (Yellow) × Medium Soft (Red)11 1/4"SteelYes000000000000
     
    Replacement Hammer Faces
    Each
    1 3/8" Dia. Medium Soft (Red) Replacement Face000000000000
    1 3/8" Dia. Hard (Yellow) Replacement Face00000000000
    1" Dia. Medium Soft (Red) Replacement Face00000000000
    1" Dia. Hard (Yellow) Replacement Face00000000000
    Press-Fit SBR Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit SBR Face, Hickory Handle with Plain Grip.

    Hickory Handle with

    Plain Grip

    SBR faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    White Face—White SBR faces are nonmarking.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Hickory Handle with Plain Grip
    1 1/22" Extra Hard (White) × Hard (Black)14"SteelYes0000000000000
     
    Replacement Hammer Faces
    Each
    Extra-Hard (White) Replacement Face000000000000
    Hard (Black) Replacement Face00000000000
    Press-Fit Steel × Nylon Faces
    Image of Product. Press Fit with Textured Grip. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Steel × Nylon Faces, Steel Handle with Textured Grip.

    Press Fit with Textured

    Grip

    Mallets with two face materials can be used for a wider range of applications than other mallets.
    Steel faces are the hardest metal faces we offer. Use them to drive chisels, masonry drills, and nails.
    Nylon faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.
    Textured Grip—Textured grips provide slip resistance.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Mallets
    Replacement
    Hammer Faces
    Head Wt.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Steel Handle with Textured Grip
    15 oz.1 1/8" Hard (White)11 1/2"SteelNo0000000000000000000000000
    1 3/8 lb.1 3/8" Hard (White)11 1/2"SteelNo00000000000000000000000
     
    Press-Fit Rawhide Leather Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Rawhide Leather Face, Hickory Handle with Plain Grip.

    Hickory Handle with

    Plain Grip

    Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.
    Hickory Handle—Hickory handles resist vibration.
    Cannot Be Sold To—Mallets cannot be sold to the listed areas due to import regulations.
    Mallets
    Replacement
    Handles
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Cannot Be
    Sold To
    Each
    Each
    Hickory Handle with Plain Grip
    11 1/4"11"SteelYesCanada00000000000000000000000000
    1 1/21 1/2"11"SteelYesCanada000000000000000000000000
    2 1/21 3/4"12 1/4"SteelYesCanada000000000000000000000000
    42"13 1/2"SteelYesCanada000000000000000000000000
    5 3/42 3/4"13 1/2"SteelYesCanada0000000000000000000000000
     
    Rawhide Leather Faces
    Face
    Dia.
    Cannot Be
    Sold To
    Each
    Clamping-Head/Press-Fit Rawhide Leather Faces
    1 1/4"Canada0000000000000
    1 1/2"Canada000000000000
    1 3/4"Canada000000000000
    2"Canada000000000000
    2 3/4"Canada000000000000
     
    Press-Fit Copper Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Copper Face, Plain Grip.

    Plain Grip

    Copper faces are for use on brass, copper, aluminum, and steel.
    Hickory Handle—Hickory handles resist vibration.
    Ash Handle—Ash handles resist vibration.
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Ash Handle with Plain Grip
    11"9"IronYes0000000000000
    1 3/41 1/4"10 3/4"IronYes000000000000
     
    Hickory Handle with Plain Grip
    2 3/41 1/2"12"IronYes000000000000
    41 3/4"12"IronYes000000000000
    6 1/22"14"IronYes000000000000
     
    Copper Faces
    Face
    Dia.
    Each
    Clamping-Head/Press-Fit Copper Faces
    1"000000000000
    1 1/4"00000000000
    1 1/2"000000000000
    1 3/4"000000000000
    2"000000000000
     

    Replaceable-Face Dead Blow Mallets

    The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.
    Rectangular Press-Fit Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Mallets , Rectangular Press-Fit Polyurethane Rubber Face.
    Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Head Wt.,
    lb.
    Face
    Lg.
    Face
    Wd.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Steel Handle—Ribbed Grip
    11 3/16"1 9/16"Medium (Yellow)11 3/4"SteelNo0000000000000
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face, Press-Fit Face.
    Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.
    Medium Hard
    (Off-White)
    Face
    Lg.
    Face
    Wd.
    Each
    Press-Fit Polyurethane Rubber Faces
    1 3/16"1 9/16"000000000000
     
    Round Screw-In Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Mallets , Round Screw-In Polyurethane Rubber Face.
    Hickory Handle—Hickory handles resist vibration.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Head Wt.
    Face
    Dia.
    Face Hardness Rating (Face Color)
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Hickory Handle—Ribbed Grip
    10 oz.1"Medium (Green) × Extra Hard (Black)1/4"-20
    		UNC
    		11"Aluminum
    		Yes0000000000000
    14 oz.1"Medium (Green) × Extra Hard (Black)1/4"-20
    		UNC
    		11"IronYes000000000000
    14 oz.1 1/4"Medium (Green) × Extra Hard (Black)5/16"-18
    		UNC
    		12"Aluminum
    		Yes000000000000
    1 3/8 lb.1 1/4"Medium (Green) × Extra Hard (Black)5/16"-18
    		UNC
    		12"IronYes000000000000
    1 3/8 lb.1 1/2" Medium (Green) × Extra Hard (Black)5/16"-18
    		UNC
    		13"Aluminum
    		Yes000000000000
    1 7/8 lb.1 1/2" Medium (Green) × Extra Hard (Black)5/16"-18
    		UNC
    		13"IronYes000000000000
    2 3/8 lb.2" Medium (Green) × Extra Hard (Black)3/8"-16
    		UNC
    		15"Aluminum
    		Yes0000000000000
    3 1/2 lb.2" Medium (Green) × Extra Hard (Black)3/8"-16
    		UNC
    		15"IronYes0000000000000
    4 1/8 lb.2 1/2"Medium (Green) × Extra Hard (Black)7/16"-14
    		UNC
    		17"Aluminum
    		Yes0000000000000
    6 1/2 lb.2 1/2"Medium (Green) × Extra Hard (Black)7/16"-14
    		UNC
    		17"IronYes0000000000000
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Soft (Orange)
    Medium (Green)
    Hard (Red)
    Extra Hard
    (Black)
    Face
    Dia.
    Thread
    Size
    Thread
    Type
    Each
    Each
    Each
    Each
    Screw-In Polyurethane Rubber Faces
    1"1/4"-20
    		UNC
    		0000000000000000000000000000000000000000000000000000
    1 1/4"5/16"-18
    		UNC
    		000000000000000000000000000000000000000000000000
    1 1/2"5/16"-18
    		UNC
    		000000000000000000000000000000000000000000000000
    2"3/8"-16
    		UNC
    		000000000000000000000000000000000000000000000000
    2 1/2"7/16"-14
    		UNC
    		000000000000000000000000000000000000000000000000
     

    High-Visibility Replaceable-Face Dead Blow Mallets

    Image of Product. Front orientation. Hammers. High-Visibility Replaceable-Face Dead Blow Mallets .
    Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. Often used on plastic, wood, and sheet metal, the polyurethane rubber faces resist oils and solvents and won't crack under high impact. The medium-hard face has a hardness similar to that of a plastic cutting board; the extra-hard face has a hardness similar to that of a hard hat. Use a face that's softer than your workpiece to avoid marring. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Choose heavier weight mallets for assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.
    Round Screw-In Polyurethane Rubber Face
    Face
    Head Wt.
    Face
    Dia.
    Face Hardness Rating (Face Color)
    Pipe
    Size
    Thread
    Type
    Overall
    Lg.
    Head Material
    Handle Color
    Handle
    Replaceable
    Each
    Polyurethane Rubber Handle with Steel Core—Textured Grip
    12 oz.1 3/8" Medium Hard (Red) × Extra Hard (Black)3/4
    		NPT
    		10"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
    1 1/2 lb.1 3/4"Medium Hard (Red) × Extra Hard (Black)1
    		NPT
    		11"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    2 lb.1 7/8" Medium Hard (Red) × Extra Hard (Black)1
    		NPT
    		11 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    3 lb.2 1/2"Medium Hard (Red) × Extra Hard (Black)1 1/4
    		NPT
    		13 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo000000000000
    4 1/2 lb.2 7/8"Medium Hard (Red) × Extra Hard (Black)1 1/2
    		NPT
    		14 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
    7 lb.2 7/8"Medium Hard (Red) × Extra Hard (Black)1 1/2
    		NPT
    		19 1/4"Polyurethane Rubber
    		Fluorescent OrangeNo0000000000000
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. High-Visibility Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.
    Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Extra Soft
    (Clear)
    Soft (Blue)
    Medium (Green)
    Medium
    Hard (Red)
    Hard (Amber)
    Extra Hard
    (Black)
    Face
    Dia.
    Pipe
    Size
    Thread
    Type
    Each
    Each
    Each
    Each
    Each
    Each
    Screw-In Polyurethane Rubber Faces
    1 3/8"3/4
    		NPT
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    1 3/4"1
    		NPT
    		000000000000000000000000000000000000000000000000000000000000000000000000000000
    1 7/8"1
    		NPT
    		000000000000000000000000000000000000000000000000000000000000000000000000000000
    2 1/2"1 1/4
    		NPT
    		000000000000000000000000000000000000000000000000000000000000000000000000000000
    2 7/8"1 1/2
    		NPT
    		000000000000000000000000000000000000000000000000000000000000000000000000000000
     

    Create-Your-Own Mallets

    Image of System. Assembled Hammer. Front orientation. Hammers. Create-Your-Own Mallets .

    Assembled Hammer

    Pair a body with two faces of different materials to create the perfect striking tool. Use mallets to drive chisels and strike work without damaging its surface. To avoid marring, use a face material that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Bodies with Screw-In Face Mount
    Image of Product. Front orientation. Hammers. Create-Your-Own Mallets , Screw-In Face.
    Image of Specification. Front orientation. Exploded view. Contains Border. Screw-In Face. Create-Your-Own Mallets .

    Screw-In

    Face

    Bodies for screw-in face mount mallets have threads at each end of the head for attaching faces. They include a head and handle. The handle has a textured grip for slip resistance.
    Face
    Head Wt.
    For Face
    Dia.
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Fiberglass Handle with Textured Grip
    8 oz.1"1/4"-20
    		UNC
    		11"Nylon
    		No00000000000000
    13 oz.1 1/2"5/16"-18
    		UNC
    		12 1/2"Nylon
    		No0000000000000
    1 1/8 lb.2"3/8"-16
    		UNC
    		14"Nylon
    		No0000000000000
    1 3/4 lb.2"3/8"-16
    		UNC
    		14"Nylon
    		No0000000000000
    4 7/8 lb.3"1/2"-13
    		UNC
    		15"Nylon
    		No0000000000000
     
    Accessories for Hammers
    PVC Faces
    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , PVC Face.

    PVC Face

    PVC Faces—PVC faces are softer than metal faces, so they're good for sheet metal work.
    Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Extra-Soft Face
    Soft Face
    Medium-Soft Face
    Medium Face
    Medium-Hard Face
    Hard Face
    Extra-Hard Face
    Face
    Dia.
    Face Thread
    Size
    Each
    Each
    Each
    Each
    Each
    Each
    Each
    Screw-In PVC Faces
    1"1/4"-20
    		———0———0000000000000000000000000000000000000000000000000000000000000
    1 1/2"5/16"-18
    		00000000000000000000000000000000000000000000000000000000000000000000000000000000000
    2"3/8"-16
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3"1/2"-13
    		———0———0000000000000000000000000———0000000000000———0
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , Polyurethane Rubber Face.

    Polyurethane

    Rubber Face

    Polyurethane Rubber Face—Polyurethane rubber faces are softer than metal faces, so they're good for sheet metal work.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Face
    Soft (Orange)
    Medium (Green)
    Hard (Red)
    Extra Hard
    (Black)
    Face
    Dia.
    Thread
    Size
    Thread
    Type
    Each
    Each
    Each
    Each
    Screw-In Polyurethane Rubber Faces
    1"1/4"-20
    		UNC
    		0000000000000000000000000000000000000000000000000000
    1 1/2"5/16"-18
    		UNC
    		000000000000000000000000000000000000000000000000
    2"3/8"-16
    		UNC
    		000000000000000000000000000000000000000000000000
    3"1/2"-13
    		UNC
    		000000000000000000000000000000000000000000000000
     
    Bodies with Clamping-Head Face Mount
    Image of Product. Front orientation. Hammers. Create-Your-Own Mallets , Clamping-Head Face.
    Image of Specification. Front orientation. Exploded view. Contains Border. Clamping-Head Face. Create-Your-Own Mallets .

    Clamping-Head Face

    Bodies for clamping-head face mount mallets have a head with two pieces that clamp together to grip faces tightly. They include a head, nut, and replaceable handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.
    Bodies
    Replacement
    Handles
    Head Wt.,
    lb.
    For Face
    Dia.
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Hickory Handle with Plain Grip
    1 1/21 1/4"11"IronYes00000000000000000000000000
    1 3/41 1/2"12 1/2"IronYes000000000000000000000000
    2 1/21 3/4"13"IronYes000000000000000000000000
    3 1/22"14"IronYes000000000000000000000000
    5 1/22 3/4"15 3/4"IronYes000000000000000000000000
     
    Accessories for Hammers
    Urethane Rubber and Polyethylene Faces
    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , Urethane Rubber Face.

    Urethane Rubber Face

    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , Polyethylene Face.

    Polyethylene Face

    Polyethylene Face and Urethane Rubber Face—Polyethylene faces and urethane rubber faces are softer than metal faces, so they're good for sheet metal work.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Hard Face
    (Off-White)
    Extra-Hard
    Face (Yellow)
    Face
    Dia.
    Each
    Each
    Clamping-Head Urethane Rubber Faces
    1 1/4"0000000000000———0
    1 1/2"000000000000———0
    1 3/4"000000000000———0
    2"000000000000———0
    2 3/4"000000000000———0
     
    Clamping-Head Polyethylene Faces
    1 1/4"———00000000000000
    1 1/2"———0000000000000
    1 3/4"———0000000000000
    2"———0000000000000
    2 3/4"———0000000000000
     
    Rawhide Leather Faces
    Image of Product. Front orientation. Rawhide Leather Face. Create-Your-Own Mallets .

    Rawhide Leather

    Faces

    Rawhide Leather Face—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.
    Face
    Dia.
    Cannot Be
    Sold To
    Each
    Clamping-Head/Press-Fit Rawhide Leather Faces
    1 1/4"Canada0000000000000
    1 1/2"Canada000000000000
    1 3/4"Canada000000000000
    2"Canada000000000000
    2 3/4"Canada000000000000
     
    Copper Faces
    Image of Product. Front orientation. Copper Face. Create-Your-Own Mallets .

    Copper Faces

    Copper Face—Copper faces are for use on brass, copper, aluminum, and steel.
    Face
    Dia.
    Each
    Clamping-Head/Press-Fit Copper Faces
    1 1/4"000000000000
    1 1/2"000000000000
    1 3/4"000000000000
    2"000000000000
     

    Nonsparking Mallets

    The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. All are suitable for driving chisels and striking work without damaging its surface. To avoid marring the workpiece, use these mallets on material that is harder than the metal faces. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
    Warning: Do not use these tools in direct contact with acetylene.
    Aluminum Bronze Face
    Image of Product. Front orientation. Hammers. Nonsparking Mallets .
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Head Material
    Handle
    Replaceable
    Certification
    Each
    Fiberglass Handle with Textured Grip
    21 1/2"14"Aluminum BronzeYesFM Approved
    		00000000000000
    42"15"Aluminum BronzeYesFM Approved
    		0000000000000
    62 1/8"15"Aluminum BronzeYesFM Approved
    		0000000000000
     
    back to top