McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Replaceable-Face Dead Blow Mallets

    The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.
    Round Screw-In Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Mallets , Round Screw-In Polyurethane Rubber Face.
    Hickory Handle—Hickory handles resist vibration.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness Rating (Face Color)
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Hickory Handle—Ribbed Grip
    3 1/22" Medium (Green) × Extra Hard (Black)3/8"-16
    		UNC
    		15"IronYes00000000000000
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Soft (Orange)
    Medium (Green)
    Hard (Red)
    Extra Hard
    (Black)
    Face
    Dia.
    Thread
    Size
    Thread
    Type
    Each
    Each
    Each
    Each
    Screw-In Polyurethane Rubber Faces
    2"3/8"-16
    		UNC
    		0000000000000000000000000000000000000000000000000000
     

    Create-Your-Own Mallets

    Image of System. Assembled Hammer. Front orientation. Hammers. Create-Your-Own Mallets .

    Assembled Hammer

    Pair a body with two faces of different materials to create the perfect striking tool. Use mallets to drive chisels and strike work without damaging its surface. To avoid marring, use a face material that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Bodies with Clamping-Head Face Mount
    Image of Product. Front orientation. Hammers. Create-Your-Own Mallets , Clamping-Head Face.
    Image of Specification. Front orientation. Exploded view. Contains Border. Clamping-Head Face. Create-Your-Own Mallets .

    Clamping-Head Face

    Bodies for clamping-head face mount mallets have a head with two pieces that clamp together to grip faces tightly. They include a head, nut, and replaceable handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.
    Bodies
    Replacement
    Handles
    Head Wt.,
    lb.
    For Face
    Dia.
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Hickory Handle with Plain Grip
    3 1/22"14"IronYes00000000000000000000000000
     
    Accessories for Hammers
    Urethane Rubber and Polyethylene Faces
    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , Urethane Rubber Face.

    Urethane Rubber Face

    Image of Product. Front orientation. Hammer Faces. Create-Your-Own Mallets , Polyethylene Face.

    Polyethylene Face

    Polyethylene Face and Urethane Rubber Face—Polyethylene faces and urethane rubber faces are softer than metal faces, so they're good for sheet metal work.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Hard Face
    (Off-White)
    Extra-Hard
    Face (Yellow)
    Face
    Dia.
    Each
    Each
    Clamping-Head Urethane Rubber Faces
    2"0000000000000———0
     
    Clamping-Head Polyethylene Faces
    2"———00000000000000
     
    Rawhide Leather Faces
    Image of Product. Front orientation. Rawhide Leather Face. Create-Your-Own Mallets .

    Rawhide Leather

    Faces

    Rawhide Leather Face—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.
    Face
    Dia.
    Cannot Be
    Sold To
    Each
    Clamping-Head/Press-Fit Rawhide Leather Faces
    2"Canada0000000000000
     
    Copper Faces
    Image of Product. Front orientation. Copper Face. Create-Your-Own Mallets .

    Copper Faces

    Copper Face—Copper faces are for use on brass, copper, aluminum, and steel.
    Face
    Dia.
    Each
    Clamping-Head/Press-Fit Copper Faces
    2"0000000000000
     

    Nonsparking Blacksmiths' Hammers

    The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal. These tools are also known as cross-peen hammers. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
    Warning: Do not use these tools in direct contact with acetylene.
    Aluminum Bronze Face
    Image of Product. Front orientation. Hammers. Nonsparking Blacksmiths' Hammers .
    Head Wt.,
    lb.
    Face
    Lg.
    Face
    Wd.
    Overall
    Lg.
    Head Material
    Handle
    Replaceable
    Certification
    Each
    Fiberglass Handle with Textured Grip
    3 1/21 7/8"1 7/8"15"Aluminum BronzeYesFM Approved
    		00000000000000
     
    back to top