McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    High-Visibility Dead Blow Mallets

    A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface. Choose a lighter weight mallet for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.
    Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. High-Visibility Dead Blow Mallets .
    Polyurethane rubber faces resist oils and solvents and won't crack under high impact. They're softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head Material
    Handle Color
    Handle
    Replaceable
    Each
    Polyurethane Rubber Handle with Steel Core—Textured Grip
    52 7/8"Soft (Fluorescent Orange)19 3/4"Polyurethane Rubber
    		Fluorescent OrangeNo00000000000000
     

    Mallets

    Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Lead Face
    Image of Product. Style F. Front orientation. Style F. Mallets .

    Style F

    Lead faces are the softest metal faces we offer. They're for use on plastic and soft, nonferrous metal, such as copper and aluminum.
    Lead Head—Lead heads deliver a heavier, more balanced blow than standard rawhide heads.
    Steel Handle—Steel handles are stronger than hickory handles but have less vibration resistance.
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Steel Handle
    F51 3/4"11"SmoothNo0000000000000
     
    Brass Face
    Image of Product. Style J. Front orientation. Style J. Mallets .
    Image of Product. Style L. Front orientation. Style L. Mallets .

    Style J

    Style L

    Brass faces are suitable for striking steel, iron, and stone.
    Hickory Handle—Hickory handles resist vibration.
    Steel Handle—Steel handles are stronger than hickory handles but have less vibration resistance.
    Textured Grip—Textured grips provide slip resistance.
    Mallets
    Replacement
    Handles
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Hickory Handle
    J51 7/8"16"TexturedYes000000000000000000000000000
     
    Steel Handle
    L51 7/8"15"TexturedNo00000000000000———0
     
    back to top