Just twist the collar ring and these DeWalt drills change from a standard cordless drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.

Just twist the collar ring and these Milwaukee drills change from a standard cordless drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.

Get a better angle when drilling into hard-to-reach spaces with these DeWalt angle-head drills.

Get a better angle when drilling into hard-to-reach spaces with these Makita angle-head drills.

With a powerful motor, these drills have the strength for big drilling and mixing applications. Their top handle provides additional leverage and stability, and a rear D-handle makes them easy to carry.

Also known as SDS-Plus rotary hammers, these are lightweight and ideal for overhead work and drilling smaller holes. For use with SDS-Plus drill bits.

Push a switch and these DeWalt drills change from a standard electric drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.

Use the built-in threaded tapered point to accurately mark, drill, and thread holes in wood and other nonmetal materials.

A ratchet mechanism makes these drills great for use in confined areas.

Rated for continuous use, these tools take on your tough drilling jobs. They have heavy duty bearings and hardened steel gears.

These drills have a threaded spindle instead of a drill chuck for use with threaded-shank drill bits. Rated for continuous use, they have heavy duty bearings and hardened steel gears.

Connect these powerful tools to your shop air. They hammer as they rotate to drive screws quickly, even through thick or dense material.

Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.

Bits are held in place with a retaining ring or set screw rather than a magnet, so the tool won't attract loose metal parts and shavings.

A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.

Also known as ESD-safe bit screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.

An insulated handle and shafts protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it for a different tip. Sets include a handle and multiple reversible shafts.

Adjust the nosepiece to set the depth and prevent fasteners from being driven too deep. These drivers are good for use with soft materials such as wood, fiberboard, drywall, and insulation board. They are powered by rechargeable batteries.

These standard-length drivers are found in every tool box.

When working in tight spaces, these short drivers fit where others can't.

These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with a cushioned grip that provides comfort and some slip resistance.

A cushioned grip over a plastic core adds comfort and some slip resistance.

Even oily hands can keep a firm grip on the suede-like textured handle.

Reduce slipping and stripping the screw recess. The tip of these drivers has ribbed grooves that grip the surface of the recess, minimizing the pressure required to achieve maximum torque.

Bright-colored handles make these tools stand out so they're less likely to be misplaced.

Also known as hollow-tip or parallel ground screwdrivers, the straight slotted tip fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage.

A shaft that extends through the handle and a steel end cap gives these drivers the strength to absorb hammer blows.

When working at heights, secure a lanyard to the ring on these tools to prevent drops. The ring rotates around the shaft so the driver turns freely.

A holding mechanism at the tip of the tool ensures the screw won’t slip off.

Use the stud on the handle to bend and loop solid wire for making connections to outlets and switches.

The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Protect your stainless steel screws by using a stainless steel driver. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These drivers eliminate that risk.

Made of beryllium copper that is FM approved, these screwdrivers help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver.

Set torque and the clutch slips to prevent you from exceeding it.

Set the desired torque and the driver indicates when it's reached.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 standards. When set torque is reached, these drivers signal with an audible click.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Also known as impact-free torque screwdrivers, these tools minimize reaction force when the set torque is reached. They reduce user fatigue when installing many fasteners in a short period of time.

Turn the handle like a standard torque driver and the 90° offset head reaches fasteners in tight spots. Factory-set screwdrivers ensure you reach the same torque every time.

Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.

Ensure carbide inserts are tightened to the correct torque. These tools are set to the recommended torque values for each screw size.

A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.

Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The tip can be replaced when it becomes worn. These tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Use these ceramic-tipped screwdrivers for adjusting sensitive electronic components such as capacitors and resistors. They're completely nonconductive and nonmagnetic so there's no risk of short-circuiting or creating magnetic interference. Remove and replace the shafts to use a different size or drive style.