Pump-to-Grip Suction-Cup Lifters








With a hand pump that quickly creates a strong vacuum seal, these lifters can hold heavier loads than push-to-grip lifters. Use them on mirrors, metal sheets, and other nonporous surfaces. You can hold items either horizontally or vertically. A red line appears on the pump if you lose suction—pump the lifter until it disappears and it’s safe to lift again.
Style C have a rigid, offset handle that helps keep loads stable.
Style D have a handle that pivots 180° so you can adjust the lifting angle.
Style E have a pivoting tie-down ring instead of a handle to secure loads with a rope, chain, or cord.
Style G have a T-handle that threads onto a 1/4"-20 stud. Remove the handle, and you can attach tools or accessories.
Style H have an oblong shape that’s good for lifting long, narrow objects.
Style J have a handle with two grips, so you can hold them vertically or at an angle. This gives you more control when you’re holding and positioning large items, such as windshields.
Lifters for textured surfaces have a soft suction cup that can grip patterned glass, stone slabs, and other uneven surfaces.
Lifters with an audible alarm warn you that vacuum levels are low even when you can’t see the red-line indicator.
Warning: Never use to lift items over people.
Lifters | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cups | Replacement Cups | ||||||||||||||
Style | For Surface Texture | Release Method | Capacity, lbs. | Dia. | Lg. | Wd. | Color | Material | Max. Temperature, °F | Handle Material | Features | Each | Each | ||
For Flat Surfaces | |||||||||||||||
A | Smooth | Release Valve | 125 | 8" | __ | __ | Black | Rubber | 120° | Brass | __ | 00000000 | 0000000 | 000000000 | 000000 |
A | Smooth | Release Valve | 125 | 8" | __ | __ | Black | Rubber | 120° | Plastic | __ | 00000000 | 00000 | 000000000 | 00000 |
A | Smooth | Release Valve | 125 | 8" | __ | __ | Black | Rubber | 120° | Plastic | Audible Alarm | 000000000 | 000000 | 000000000 | 00000 |
A | Smooth | Release Valve | 260 | 8" | __ | __ | Black | Rubber | 100° | Plastic | __ | 000000000 | 000000 | 000000000 | 00000 |
A | Smooth, Textured | Release Valve | 75 | 8" | __ | __ | Black | Rubber | 120° | Plastic | __ | 000000000 | 00000 | 000000000 | 00000 |
A | Smooth, Textured | Release Valve | 240 | 8" | __ | __ | Black | Rubber | 100° | Aluminum | __ | 000000000 | 000000 | 000000000 | 000000 |
For Curved Surfaces | |||||||||||||||
A | Smooth | Release Valve | 175 | 10" | __ | __ | Black | Rubber | 120° | Brass | __ | 000000000 | 000000 | 000000000 | 00000 |
For Flat and Curved Surfaces | |||||||||||||||
A | Smooth, Textured | Release Valve | 175 | 8" | __ | __ | Black | Rubber | 100° | Aluminum | __ | 000000000 | 000000 | 000000000 | 00000 |
C | Smooth | Pull Tab | 70 | 6" | __ | __ | Black | Rubber | 120° | Aluminum | __ | 00000000 | 00000 | 000000000 | 00000 |
D | Smooth | Pull Tab | 70 | 6" | __ | __ | Black | Rubber | 120° | Stainless Steel | 180° Pivoting Handle | 00000000 | 00000 | 000000000 | 00000 |
E | Smooth | Pull Tab | 70 | 6" | __ | __ | Black | Rubber | 120° | Stainless Steel | 180° Pivoting Tie Down | 00000000 | 00000 | 000000000 | 00000 |
F | Smooth | Pull Tab | 70 | 6" | __ | __ | Black | Rubber | 120° | Brass | __ | 00000000 | 00000 | 000000000 | 00000 |
G | Smooth | Pull Tab | 15 | 3" | __ | __ | Black | Rubber | 120° | Plastic | __ | 00000000 | 00000 | 000000000 | 00000 |
H | Smooth | Pull Tab | 40 | __ | 3" | 6" | Black | Rubber | 120° | Aluminum | __ | 00000000 | 00000 | 000000000 | 00000 |
J | Smooth | Pull Tab | 70 | 6" | __ | __ | Black | Rubber | 120° | Plastic | __ | 000000000 | 00000 | 000000000 | 00000 |
Lock-to-Grip Suction-Cup Lifters






Lock these lifters onto your material with the flip of a lever—it creates a vacuum under the cup for a strong, continuous grip. To release the suction, flip the lever back. Use these lifters on nonporous surfaces, such as mirrors and metal sheets.
Styles A, C, D, and E have multiple cups for more control during lifting than a single cup. Additional points of contact make it easier to position items, especially if they are large or oddly shaped. Their large handles are comfortable to hold.
Styles B and F have a single cup, so you can secure them with one hand.
Lifters for flat and curved surfaces have flexible cups that are designed to grip gently rounded objects, such as windshields or large tanks. Those for textured surfaces can also grip stone slabs, metal plates with raised patterns, and other uneven material.
Replacement cup kits include a cup, lever, and spring.
Holders mount to a wall for quick lifter access.
Warning: Never use to lift items over people.
Lifters | Replacement Cup Kits | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Capacity, lbs. | For Surface Texture | Cup Dia. | Cup Center-to-Center | Overall Lg. | Cup Color | Cup Material | Max. Temperature, °F | Handle Material | Working Orientation | Each | Each | ||
For Flat Surfaces | ||||||||||||||
A | 110 | Smooth | 4 3/4" | 8 13/16" | 13 3/4" | Black | SBR Rubber | 100° | Plastic | Horizontal, Vertical | 0000000 | 000000 | 0000000 | 000000 |
A | 130 | Smooth | 4 3/4" | 8 3/16" | 13" | Black | SBR Rubber | 100° | Aluminum | Horizontal, Vertical | 0000000 | 00000 | 0000000 | 00000 |
B | 65 | Smooth | 4 3/4" | __ | 4 3/4" | Black | SBR Rubber | 100° | Aluminum | Horizontal, Vertical | 00000000 | 00000 | 00000000 | 00000 |
C | 150 | Smooth | 4 3/4" | 7 7/8" | 12 5/8" | Black | SBR Rubber | 100° | Aluminum | Horizontal, Vertical | 00000000 | 00000 | 00000000 | 00000 |
D | 195 | Smooth | 4 3/4" | 8 13/16" | 13 1/2" | Black | SBR Rubber | 100° | Plastic | Horizontal, Vertical | 00000000 | 00000 | 000000 | 00 |
D | 220 | Smooth | 4 3/4" | 8 13/16" | 13 1/2" | Black | EPDM Rubber | 100° | Aluminum | Horizontal, Vertical | 0000000 | 000000 | 0000000 | 00000 |
For Flat and Curved Surfaces | ||||||||||||||
B | 55 | Smooth | 4 3/4" | __ | 4 3/4" | Black | SBR Rubber | 100° | Aluminum | Horizontal, Vertical | 00000000 | 00000 | 00000000 | 00000 |
E | 75 | Smooth | 4 3/4" | 10 1/2" | 15 1/2" | Black | SBR Rubber | 100° | Plastic | Horizontal, Vertical | 0000000 | 00000 | 00000000 | 00000 |
E | 95 | Smooth | 5 7/8" | 10 3/4" | 16 5/8" | Black | SBR Rubber | 100° | Plastic | Horizontal, Vertical | 00000000 | 000000 | 00000000 | 00000 |
F | 130 | Smooth, Textured | 7 1/8" | __ | 7 1/8" | Black | EPDM Rubber | 100° | Aluminum | Horizontal, Vertical | 00000000 | 000000 | 00000000 | 00000 |
Holders for Style A and Style E Lifters | 000000 | Each | 000000 |
Push-to-Grip Suction-Cup Lifters









Push down to create a vacuum and grip your items. Use on smooth, nonporous surfaces, such as mirrors and metal sheets.
Style J allows two people to carry metal, glass, and plastic sheets with one lifter.
Lifters with silicone cups are designed for high-temperature applications.
Holder mounts to a wall and holds Styles E and F lifters for quick access.
Note: Capacities are for horizontal lifting. Not recommended for vertical lifting.
Warning: Never use to lift items over people.
Lifters | Replacement Push-Button Assemblies | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Release Method | Capacity, lbs. | Cup Dia. | Cup Center-to-Center | Reach | Cup Color | Cup Material | Max. Temperature, °F | Handle Material | Each | Each | |||
For Flat Surfaces | |||||||||||||
B | Pull Tab | 25 | 4 3/4" | __ | __ | Black | Vinyl Plastic | 120° | Plastic | 00000000 | 00000 | 000000 | 00 |
For Flat and Curved Surfaces | |||||||||||||
A | Pull Tab | 4 | 2 1/4" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 0000 | 000000 | 00 |
A | Pull Tab | 6 | 2 5/8" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 0000 | 000000 | 00 |
B | Pull Tab | 10 | 3 1/4" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 0000 | 000000 | 00 |
C | Pull Tab | 15 | 3 1/4" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 0000 | 000000 | 00 |
D | Push Button | 3 | 2 1/8" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 00000 | 00000000 | 000000 |
D | Push Button | 10 | 3 1/4" | __ | __ | Black | Rubber | 200° | Rubber | 0000000 | 00000 | 00000000 | 00000 |
D | Push Button | 10 | 3 1/4" | __ | __ | Red | Silicone Rubber | 445° | Rubber | 0000000 | 00000 | 00000000 | 00000 |
E | Pull Bar | 15 | 3" | __ | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
E | Pull Bar | 25 | 4" | __ | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
E | Pull Bar | 35 | 5" | __ | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
F | Pull Bar | 30 | 3" | 3 1/2" | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
F | Pull Bar | 50 | 4" | 6" | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
F | Pull Bar | 75 | 5" | 6" | __ | Black | Rubber | 200° | Aluminum | 0000000 | 00000 | 000000 | 00 |
G | Push Button | 3 | 2 1/8" | __ | 15" | Black | Rubber | 200° | Steel | 000000 | 00000 | 00000000 | 00000 |
G | Push Button | 3 | 2 1/8" | __ | 18" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 00000000 | 00000 |
G | Push Button | 5 | 3 1/4" | __ | 15" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 00000000 | 00000 |
G | Push Button | 5 | 3 1/4" | __ | 18" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 00000000 | 00000 |
G | Push Button | 6 | 4" | __ | 15" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 000000 | 00 |
G | Push Button | 6 | 4" | __ | 18" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 00000000 | 00000 |
H | Push Button | 6 | 2 1/8" | 3 1/4" | 15" | Black | Rubber | 200° | Steel | 000000 | 00000 | 00000000 | 00000 |
H | Push Button | 6 | 2 1/8" | 3 1/4" | 18" | Black | Rubber | 200° | Steel | 0000000 | 00000 | 00000000 | 00000 |
J | Pull Ring | 50 | 4" | 19 3/4" | 31" | Black | Rubber | 200° | Aluminum | 0000000 | 000000 | 000000 | 00 |
J | Pull Ring | 75 | 5" | 19 3/4" | 31" | Black | Rubber | 200° | Aluminum | 0000000 | 000000 | 000000 | 00 |
Holders for Style E and Style F Lifters | 000000 | Each | 000000 |
Hand-Held Panel Lifters


Move large, heavy sheets of plywood, fiberboard, cement board, and drywall with these nonmarring lifters. Unlike suction-cup and magnetic lifters, they will hold porous and nonmagnetic sheets. Pads on the lifter grip the panel when the handle is raised. Set the load down and lower the handle to release the material.
Warning: Never use to lift people or items over people.
Pry-Off Hand-Held Magnetic Lifters




A no-frills solution to safely grab machined parts, scrap metal, and other magnetic items. These lifters are often used to move items that are too hot or sharp to handle directly.
Attach lifters with a lifting eye to a hook, rope, or chain to lower them into hard-to-reach places, such as deep bins or waterways. Alternatively, stick them to a magnetic surface and use the lifting eye to route hose, wiring, and other nonmagnetic items. Style E lifters have two different holes for the lifting eye, so you can thread it into different sides.
Lifters with slide-on shields come with covers for the magnet to protect it from damage and wear when not in use.
Warning: Never use to lift people or items over people.
Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | Capacity, lbs. | Lg. | Wd. | Ht. | Eye Dia. | Material | Material Orientation | Includes | Each | |
Pry-Off Handle | ||||||||||
A | 25 | 1" | 3/4" | 2 1/2" | __ | Steel | Horizontal, Vertical | __ | 0000000 | 00000 |
A | 50 | 2" | 3/4" | 2" | __ | Steel | Horizontal, Vertical | __ | 0000000 | 00000 |
A | 100 | 4" | 3/4" | 2 1/2" | __ | Steel | Horizontal, Vertical | __ | 0000000 | 00000 |
A | 150 | 5" | 2" | 5" | __ | Steel | Horizontal, Vertical | __ | 0000000 | 00000 |
A | 225 | 5 1/4" | 2" | 5" | __ | Steel | Horizontal, Vertical | __ | 0000000 | 00000 |
B | 100 | 5 1/4" | 1" | 3 1/2" | __ | Plastic | Horizontal, Vertical | Slide-On Shields | 00000000 | 00000 |
Pry-Off Lifting Eye | ||||||||||
C | 100 | 2" | 2" | 1" | 1/2" | Steel | Horizontal, Vertical | Slide-On Shields | 0000000 | 00000 |
C | 150 | 5" | 2" | 2 1/2" | 1/2" | Steel | Horizontal, Vertical | Slide-On Shields | 0000000 | 00000 |
E | 100 | 2 1/2" | 2 1/2" | 1" | 1/2" | Steel | Horizontal, Vertical | Slide-On Shields | 0000000 | 00000 |
Pull-Release Hand-Held Magnetic Lifters

Quickly switch between grabbing and dropping items—the magnet on these lifters releases when you squeeze the lever and reengages as soon as you let go. Great for repeat jobs, they’re often used to move large amounts of small magnetic items, such as metal fasteners, from one place to another. They also work well for metal items that are too hot or sharp to handle directly.
Style A-D lifters pick up and release small objects more quickly and easily than Style E lifters.
Warning: Never use to lift people or items over people.
Suction-Cup Holders

Designed for temporary mounting on smooth, nonporous surfaces, these suction-cup holders are easy to remove and reposition. They have an unthreaded through hole that can be tapped to your desired thread size.
Style B have a pump to create a strong suction for holding heavy items. An indicator on the pump lets you know when you have suction loss.
Overall | |||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Wd. | Ht. | Dp. | Cap., lbs. | Material | Appearance | Cup Material | Each | |
Wall, Under Mount | |||||||||
B | 6" | 6" | 2 1/8" | 70 | Stainless Steel | Dull | Black Rubber | 00000000 | 000000 |