McMaster-Carr

Search Results

	Nozzle Type Nozzle Type


Flexible	Rigid

	Capacity Capacity

	Power Source Power Source

Manual

Air

	For Maximum ISO Viscosity Grade For Maximum ISO Viscosity Grade

	Nozzle Length Nozzle Length

	Component Component

Pump

Lid with Threaded Cap

Heavy Duty Pump

Container

Reducer Nozzle

Lid with Twist-Open Spout

	For Maximum SAE Viscosity Grade For Maximum SAE Viscosity Grade

140W

Not Rated

	Body Material Body Material

Steel

Aluminum

	Dispensing Tip Material Dispensing Tip Material

	Nozzle Material Nozzle Material

Steel

Aluminum

Plastic

	For Maximum SSU Viscosity Grade For Maximum SSU Viscosity Grade

	Lid Color Lid Color

	Black		Blue
	Green		Red
	Yellow

	Maximum Temperature Maximum Temperature

120° F

175° F

	For Maximum AGMA Viscosity Grade For Maximum AGMA Viscosity Grade

Not Rated

	Nozzle Connection Thread Size Nozzle Connection Thread Size

1/4"-28

13/32"-24

	Nozzle Connection Thread Type Nozzle Connection Thread Type

UNF

	Seal Material Seal Material

Buna-N Rubber

Viton® Fluoroelastomer
Rubber

	Oil Dispenser Connection Thread Size Oil Dispenser Connection Thread Size

1/4"-28

13/32"-24

	Oil Dispenser Connection Thread Type Oil Dispenser Connection Thread Type

UNF

	Diameter Diameter

6 5/8"

6 3/4"

9 3/4"

	Nozzle OD Nozzle OD

1/4"

1/2"

	Flow Rate Flow Rate

2.8 oz./stroke

15 gph

1.5 gpm

	Maximum Viscosity Maximum Viscosity

400 cP

600 cP

View catalog pages (4)

Forward

How can we improve?

76 Products

Hand-Held Oil Dispensers

For styles A and B, press on the container bottom to dispense. Styles C-E have a flow-control lever that allows you to vary the amount of oil dispensed from a single drop to a stream.

Oil Dispensers
		Nozzle			Oil Dispenser Connection					For Max. Viscosity						Replacement Nozzles
Style	Cap.	Type	Lg.	Material	Thread Type	Thread Size	Gender	Dispensing Tip Material	Body Material	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each		Each
A	12 oz.	Flexible	7"	Zinc-Plated Steel	__	__	__	Zinc	Steel	320	90	1,400	6	0000000	00000	000000	00
B	12 oz.	Rigid	4 1/2"	Zinc-Plated Steel	__	__	__	Zinc-Plated Steel	Steel	320	90	1,400	6	0000000	0000	000000	00
C	12 oz.	Flexible	8"	Steel	UNF	1/4"-28	Female	Zinc	Steel	68	20	300	2	00000000	00000	00000000	00000
C	16 oz.	Flexible	8"	Steel	UNF	1/4"-28	Female	Zinc	Steel	68	20	300	2	00000000	00000	00000000	0000
C	1 qt.	Flexible	8"	Steel	UNF	1/4"-28	Female	Zinc	Steel	68	20	300	2	00000000	00000	00000000	0000
D	12 oz.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000
D	16 oz.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000
D	1 qt.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000
E	12 oz.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000
E	16 oz.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000
E	1 qt.	Rigid	8"	Steel	UNF	1/4"-28	Female	Aluminum	Steel	68	20	300	2	00000000	00000	00000000	0000

Nozzles with Dispensing Tips for Hand-Held Oil Dispensers

	Nozzle			Nozzle Connection
Style	Type	Lg.	Material	Thread Type	Thread Size	Gender	Dispensing Tip Material		Each
A	Flexible	8"	Steel	UNF	1/4"-28	Male	Zinc	00000000	00000
B	Rigid	8"	Steel	UNF	1/4"-28	Male	Aluminum	00000000	0000
C	Rigid	8"	Steel	UNF	1/4"-28	Male	Aluminum	00000000	0000

Easy-Lube Hand-Held Oil Dispensers

Pull the trigger on these dispensers for easier one-hand operation than standard hand-held oil dispensers.

Style C have an adjustable spray pattern; twist the knurled dispensing tip to adjust from a thin stream to a fine mist.

Oil Dispensers
		Nozzle					For Max. Viscosity					Each		Replacement Dispensing Tips
Style	Cap.	Type	Lg.	Material	Dispensing Tip Material	Body Material	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		1-5	6-Up		Each
A	6 oz.	Rigid	5"	Steel	Steel	Steel	46	20	240	1	0000000	000000	00000	000000	00
A	1 qt.	Rigid	6"	Steel	Steel	Steel	46	20	240	1	0000000	00000	00000	000000	00
B	6 oz.	Flexible	6"	Zinc-Plated Steel	Zinc-Plated Steel	Steel	46	20	240	1	0000000	00000	00000	000000	00
B	20 oz.	Flexible	6"	Zinc-Plated Steel	Zinc-Plated Steel	Steel	46	20	240	1	0000000	00000	00000	000000	00
C	6 oz.	Rigid	5"	Steel	Aluminum	Steel	22	5W	100	Not Rated	0000000	00000	00000	0000000	00000
C	10 oz.	Rigid	5"	Steel	Aluminum	Steel	22	5W	100	Not Rated	0000000	00000	00000	0000000	0000
C	20 oz.	Rigid	6"	Steel	Aluminum	Steel	22	5W	100	Not Rated	0000000	00000	00000	0000000	0000

Easy-Fill Hand-Held Oil Dispensers

These dispensers have an opening for filling without removing the nozzle.

Styles A-C have a flow-control lever that allows you to vary the amount of oil dispensed from a single drop to a stream. Styles D and E pour when tilted. Flow rate depends on temperature.

Oil Dispensers
		Nozzle			Oil Dispenser Connection					For Max. Viscosity						Replacement Nozzles
Style	Cap.	Type	Lg.	Material	Thread Type	Thread Size	Gender	Dispensing Tip Material	Body Material	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each		Each
A	16 oz.	Flexible	10"	Steel	NS	13/32"-24	Female	Zinc	Steel	320	90	1,400	6	0000000	000000	0000000	00000
A	24 oz.	Flexible	12"	Steel	NS	13/32"-24	Female	Zinc	Steel	320	90	1,400	6	0000000	00000	0000000	0000
A	1 qt.	Flexible	15"	Steel	NS	13/32"-24	Female	Zinc	Steel	320	90	1,400	6	0000000	00000	0000000	0000
B	16 oz.	Rigid	7 1/2"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
B	24 oz.	Rigid	9 1/2"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
B	1 qt.	Rigid	11"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
C	16 oz.	Rigid	7 1/2"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
C	24 oz.	Rigid	9 1/2"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
C	1 qt.	Rigid	11"	Steel	NS	13/32"-24	Female	Aluminum	Steel	320	90	1,400	6	0000000	00000	0000000	0000
D	2 qt.	Rigid	6 1/4"	Steel	__	__	__	Steel	Steel	Not Rated	Not Rated	Not Rated	Not Rated	0000000	00000	000000	00
E	2 qt.	Rigid	6 1/4"	Steel	__	__	__	Steel	Steel	Not Rated	Not Rated	Not Rated	Not Rated	0000000	00000	000000	00

Nozzles with Dispensing Tips for
Easy-Fill Hand-Held Oil Dispensers

	Nozzle			Nozzle Connection
Style	Type	Lg.	Material	Thread Type	Thread Size	Gender	Dispensing Tip Material		Each
A	Flexible	10"	Steel	NS	13/32"-24	Male	Zinc	0000000	00000
A	Flexible	12"	Steel	NS	13/32"-24	Male	Zinc	0000000	0000
A	Flexible	15"	Steel	NS	13/32"-24	Male	Zinc	0000000	0000
B	Rigid	7 1/2"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000
B	Rigid	9 1/2"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000
B	Rigid	11"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000
C	Rigid	7 1/2"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000
C	Rigid	9 1/2"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000
C	Rigid	11"	Steel	NS	13/32"-24	Male	Aluminum	0000000	0000

Precision Hand-Held Oil Dispensers

A needle dispensing tip provides fine control for lubricating small parts. Push the button to dispense. Flow rate depends on temperature.

	Nozzle
Cap., oz.	Type	Lg.	Material	Overall Lg.	Body Material	Includes		Each
1 1/2	Rigid	1 1/2"	Aluminum	5 5/8"	Aluminum	Nozzle Cover, Pocket Clip	000000	000000

Air-Powered Hand-Held Oil Dispensers

Deliver a mist of oil using shop air. A knob on the handle adjusts the amount of oil dispensed. Twist the dispensing tip to adjust the spray pattern. Flow rate depends on temperature.

		Nozzle							Air Inlet
Cap., qt.	Flow Rate, gph	Type	Lg.	Material	Dispensing Tip Material	Body Material	Air Consumption @ Pressure	Air Inlet Pressure, psi	Thread Type	Pipe Size	Gender	Features		Each
1	15	Rigid	12"	Aluminum	Brass	Steel	9 cfm @ 100 psi	80-120	NPT	1/4	Female	Adjustable Spray Pattern	00000000	0000000

Manual Oil-Dispensing Pumps

Vertical

Horizontal with Left Side Handle

Horizontal with Right Side Handle

Dispense a fixed amount of oil by pumping the handle. To control flow to multiple lubrication points, use metering valves (sold separately).

Vertical pump dispenses oil when you pull the handle. Horizontal pumps dispense oil when you release the handle.

			Oil Outlet			Overall					Mounting		For Max. Viscosity
Cap., oz.	Oz. per Cycle	Max. Oil Outlet Pressure, psi	Thread Type	Thread Size	Gender	Ht.	Wd.	Dp.	Reservoir Material	Temp. Range, °F	Hole Dia.	Fasteners Included	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
Vertical with Bottom Handle
15	0.27	200	UNF	5/16"-24	Female	7 7/8"	3 15/16"	5 15/16"	Aluminum	32° to 120°	1/4"	No	150	40	700	4	000000	0000000
Horizontal with Left Side Handle
19	0.27	50	UNF	5/16"-24	Female	5"	3 3/16"	9 1/4"	Aluminum	32° to 120°	1/4"	No	150	40	700	4	000000	000000
Horizontal with Right Side Handle
19	0.27	50	UNF	5/16"-24	Female	5"	3 3/16"	9 1/4"	Aluminum	32° to 120°	1/4"	No	150	40	700	4	000000	000000

Metering Container-Mount Oil Dispensers

Drum Not Included

Equipped with a flowmeter/totalizer, this dispenser displays both flow rate and cumulative flow volume of the oil dispensed. Mount it to your drum of oil. It's smaller and more portable than air-powered container-mount dispensers, making it good for refilling gear boxes and transmissions. The container is not included.

For Container									For Max. Viscosity
Size, gal.	Max. Dia.	Max. Ht.	Oz. per Stroke	Oil Outlet Hose Lg., ft.	Material	Volume Measurement Scale	Max. Total Volume	Batteries Included	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Includes		Each
16	15"	30"	8	6	Aluminum, Steel	Pints, Quarts, Liters, Gallons	9,999 units	Yes	460	140W	7,750	7	Cover, Curved Nozzle, Dolly, Meter, Oil Outlet Hose, Pump	0000000	0000000

Faucets for Oil-Dispensing Stations

Add faucets to oil dispensing stations for increased utility.

	Oil Inlet							For Max. Viscosity
Flow Rate, gpm	Thread Type	Pipe Size	Gender	Overall Ht.	Projection	Material	Mounting Hardware Included	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
1.5	NPTF	1/2	Male	5 5/8"	5 5/8"	Stainless Steel, Steel	Yes	460	140W	7,750	7	0000000	0000000

Oil-Dispensing Stations

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers. They include one faucet and can fit up to three, so you can access different types of oil at a single centralized point.

Stations with a meter measure oil as it's dispensed.

Stations

Station with Faucet

Station with Faucet and Meter

		Overall						For Max. Viscosity
For Max. Container Ht.	Flow Rate, gpm	Ht.	Wd.	Dp.	No. of Faucet Knockouts	Faucet Mounting Hardware Included	Material	ISO Grade	SAE Grade	SSU Grade	AGMA Grade	Features		Each
Station with Faucet
14 7/8"	1.5	32 5/8"	19 3/4"	10 3/4"	3	Yes	Steel	460	140W	7,750	7	Knockouts for Digital Meters, Removable Drip Tray	0000000	0000000
Station with Faucet and Meter
14 7/8"	1.5	32 5/8"	19 3/4"	10 3/4"	3	__	Steel	460	140W	7,750	7	Removable Drip Tray	0000000	000000

Faucets

	Oil Inlet
Flow Rate, gpm	Thread Type	Pipe Size	Gender	Overall Ht.	Projection	Material	Mounting Hardware Included		Each
1.5	NPTF	1/2	Male	5 5/8"	5 5/8"	Stainless Steel, Steel	Yes	0000000	0000000

Design-Your-Own Sealed Dispensers

Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids. Not for use with fuels or solvents.

Containers and lids are all interchangeable.

Spout extenders are used with the lids with twist-open spout. They allow controlled pouring in hard-to-reach areas.

Pumps are used with the lids with threaded cap. They dispense approximately 2.8 oz. per stroke. Pumps cannot be used with the 64-oz. container.

Hose kit is used with the heavy duty pump. It allows you to fill the container without removing the lid. You can also use it to attach the container to threaded machinery fill points.

Breather vent screws into the inlet on the heavy duty pump to protect against contaminants.

Reducer nozzle is used with either the standard or heavy duty pump to reduce the hose outlet for controlled dispensing.

Containers

64 oz. to 1 1/4 gal.

2 1/2 gal.

Cap.	Dia.	Ht.	Mouth OD	Graduation Marks	Material	Color	Max. Temp., °F		Each
64 oz.	6 5/8"	8 3/4"	4 7/8"	1/4 qt., 0.25 L	Polyethylene Plastic	Semi-Clear	175°	0000000	000000
96 oz.	6 3/4"	10 1/2"	4 7/8"	1/4 qt., 0.25 L	Polyethylene Plastic	Semi-Clear	175°	0000000	00000
1 1/4 gal.	7"	11"	4 7/8"	1/2 qt., 0.5 L	Polyethylene Plastic	Semi-Clear	175°	0000000	00000
2 1/2 gal.	9 3/4"	13 3/4"	4 7/8"	1/2 qt., 0.5 L	Polyethylene Plastic	Semi-Clear	175°	0000000	00000

Lids

Lid

Lid with Threaded Cap

Lid with Twist-Open Spout

Lids
		Spout								Replacement Seal Kits
Component	For Mouth OD	Opening Dia.	Lg.	Lid Material	Seal Material	Max. Temp., °F	Choose a Lid Color		Each		Each
Lid	4 7/8"	__	__	Polyethylene Plastic	Buna-N Rubber	175°	Black, Blue, Green, Red, Yellow	0000000	000000	000000	00
Lid with Threaded Cap	4 7/8"	__	__	Polyethylene Plastic	Buna-N Rubber	175°	Black, Blue, Green, Red, Yellow	0000000	00000	000000	00
Lid with Twist-Open Spout	4 7/8"	1/4"	5"	Polyethylene Plastic	Buna-N Rubber	175°	Black, Blue, Green, Red, Yellow	0000000	00000	0000000	00000
Lid with Twist-Open Spout	4 7/8"	1/2"	8"	Polyethylene Plastic	Buna-N Rubber	175°	Black, Blue, Green, Red, Yellow	0000000	00000	0000000	0000
Lid with Twist-Open Spout	4 7/8"	1"	5"	Polyethylene Plastic	Buna-N Rubber	175°	Black, Blue, Green, Red, Yellow	0000000	00000	0000000	0000

Spout Extenders for Lids with Twist-Open Spout

	Spout
For Spout Opening Dia.	Opening Dia.	Lg.	Max. Temp., °F		Each
1/4", 1/2"	1/2"	12 1/2"	175°	0000000	000000
1"	1"	10"	175°	0000000	00000

Pumps for Lid with Threaded Cap

Pump

Heavy Duty Pump

Pumps
							Outlet			Inlet						Replacement Seal Kits
Component	Max. Viscosity, cP	Flow Rate, oz./stroke	Nozzle OD	Hose Lg., ft.	Hose Material	Seal Material	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Max. Temp., °F		Each		Each
Pump	400	2.8	1/2"	5	PVC Plastic	Buna-N Rubber	1/4	NPT	Male	__	__	__	175°	0000000	000000	0000000	00000
Heavy Duty Pump	600	2.8	1/2"	5	PVC Plastic	Viton® Fluoroelastomer Rubber	1/4	NPT	Male	1/4	NPT	Male	175°	0000000	000000	0000000	00000

Reducer Nozzles for Pumps

Nozzle
OD	Material	Max. Temp., °F		Each
1/4"	Polyethylene Plastic	175°	0000000	00000

Optional Discharge Hoses for Pumps

With Nozzle

With NPT Outlet

Nozzle		Outlet			Inlet			Hose
OD	Material	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Material	Reinforcement Material	Max. Temp., °F		Each
5-ft. Lg.
1/2"	Aluminum	__	__	__	1/4	NPT	Female	PVC Plastic	304 Stainless Steel	175°	0000000	000000
__	__	1/4	NPT	Male	1/4	NPT	Female	PVC Plastic	304 Stainless Steel	175°	0000000	00000
10-ft. Lg.
1/2"	Aluminum	__	__	__	1/4	NPT	Female	PVC Plastic	304 Stainless Steel	175°	0000000	00000
__	__	1/4	NPT	Male	1/4	NPT	Female	PVC Plastic	304 Stainless Steel	175°	0000000	00000

Hose Kits for Heavy Duty Pump

Outlet			Inlet			Hose					5-ft. Lg.
Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Inlet Gender	Material	Reinforcement Material	Removes Particle Size Down To, microns	Max. Temp., °F	Includes		Each
1/4	NPT	Male	1/4	NPT	Female	PVC Plastic	304 Stainless Steel	10	175°	1/4 NPT Male Adapter, Breather Vent	0000000	000000

Breather Vents for Heavy Duty Pump

Removes Particle Size Down To, microns	Max. Temp., °F		Each
10	175°	0000000	000000

Terms and Conditions and Privacy Policy

Hand-Held Oil Dispensers

Nozzles with Dispensing Tips for Hand-Held Oil Dispensers

Easy-Lube Hand-Held Oil Dispensers

Easy-Fill Hand-Held Oil Dispensers

Nozzles with Dispensing Tips forEasy-Fill Hand-Held Oil Dispensers

Precision Hand-Held Oil Dispensers

Air-Powered Hand-Held Oil Dispensers

Manual Oil-Dispensing Pumps

Metering Container-Mount Oil Dispensers

Faucets for Oil-Dispensing Stations

Oil-Dispensing Stations

Design-Your-Own Sealed Dispensers

Nozzles with Dispensing Tips for
Easy-Fill Hand-Held Oil Dispensers