Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

The thick shank provides more control for more consistent marks than our standard metal stamps. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

These stamps have a solid face.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

These steel stamps are strong enough to make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces.

Everything you need to make your own messages in one convenient case, including letters, numbers, punctuation, and a holder.

Mark keys with common messages such as "Do Not Copy" and "Master".

Mark surfaces with unique characters for traceability, quality control, and inspection.

Send in your logo or design to have it turned into a stamp.

Specify the message you need.

The built-in pad automatically inks the stamp after each impression for fast, repetitive stamping.

Rotate the individual bands to select the characters you need.

These stamps automatically advance to the next number or you can set them to move ahead after the 2nd, 3rd, 4th, 6th, or 12th impression.

The built-in pad automatically inks your selected date after each impression for fast, repetitive stamping.

Use this ink on boxes, fabric, and paper as well as metal and plastic surfaces.

Mix the included catalyst into this ink to add resistance to solvents and abrasion. Use on nonporous surfaces such as plastic, glass, and metal.

Make marks on metal even when the surface is oily or wet.

Fit the punches in these sets through existing holes and mark the center of the hole in a second workpiece.

These sets come with three punches for use with a variety of hole sizes. Insert one into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.

Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.

Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.

The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.

Punch has two viewing lenses. One has a circle and dot and one has a crosshair to enable you to pinpoint the location where you need to punch. Replace the lens with one of the two included punches and strike it with a hammer to mark the hole center.

With an internal spring mechanism, these Starrett punches offer one-hand operation when marking hole centers.

Also known as center punches, the tools in these sets mark hole centers in metal and other materials.

Strike these Starrett punches with a hammer to mark hole centers in metal and other materials. Also known as center punches.

An insulated handle and shaft protects against shock from accidental contact with live electrical circuits. These awls are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Use these punches to make round holes up to 1" dia. in fabric, leather, and rubber.

Sets include common ID and OD sizes to create gaskets and washers in two strikes.

Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.

Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

The included hydraulic driver allows you to punch conduit up to size 2.

Punch conduit up to size 1 1/4.

Cut DIN-size holes in steel up to 7/64" thick using a driver ram and hydraulic pump.

Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

These medium duty tools have more than double the punching force of compact portable lever-operated punches.

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.

Minimize damage to your work surfaces with these brass punches, which are softer than steel punches.

Use these sets to knock out pins and rivets that have already been loosened.

The rounded tip of these punches fits into the open ends of hollow and spring pins to protect them from damage during removal.

A soft brass body minimizes the damage these punches make on work surfaces.

The knurled handle of these punches offers a more secure grip than standard punches. Use pin-removal punches to knock out pins and rivets that have already been loosened.

Impact-resistant steel makes these punches stronger and more durable than standard pin-removal punches.

Minimize damage to your work surfaces with these brass punches, which are softer than steel punches.

Sets include three punches in various point diameters to set nails flush or drive them out of view without damaging wood surfaces.

Contains pin-loosening, pin-removal, and center-marking punches as well as chisels.

Use alignment pins to align structural components such as I-beams and angle iron for bolting, riveting, and welding.