Filter by
Fully Wound Weight Capacity
Application
Power Source
Pulling Rope Position
Weight Capacity
For Maximum Rope Length
Base Width
Gear Speed Ratio
Material
Body Type
Base Length
Overall Width
Handle Location
Overall Height
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Length
Hand Winches for Wire Rope—For Horizontal Pulling
 |
Turn the crank to move material horizontally. These winches wind faster than precise-positioning winches.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
2 Speeds—Winches with two speeds wind quickly in high gear and more easily in low gear than single-speed winches.
Wt. Cap., lb. | Base | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Each | |||
Open Body | |||||||||||||||||
| 600 | 275 | 61 | 5/32" | 3 5/8" | 4 1/4" | 5 1/8" | 5 3/4" | 4 1/4" | 6 3/4" | Steel | 3.2:1 | 1 | No | 3644T911 | 000000 | ||
| 1,100 | 500 | 79 | 3/16" | 3 5/8" | 5 1/8" | 5 1/8" | 7 1/8" | 5 1/4" | 6 3/4" | Steel | 3.7:1 | 1 | No | 3644T931 | 00000 | ||
| 1,400 | 725 | 40 | 1/4" | 4" | 5 3/8" | 5 5/8" | 7 3/8" | 5 3/8" | 6 3/4" | Steel | 4.4:1 | 1 | No | 3644T941 | 00000 | ||
| 2,000 | 1,000 | 58 | 1/4" | 4 3/4" | 7 1/4" | 6 1/2" | 9 3/4" | 6 3/4" | 9 1/2" | Steel | 5.4:1, 12.4:1 | 2 | No | 3644T951 | 000000 | ||
| 2,500 | 1,300 | 47 | 5/16" | 4 7/8" | 7 3/4" | 6 3/8" | 10 1/4" | 7 1/2" | 9 1/2" | Steel | 5.4:1, 17.3:1 | 2 | No | 3644T961 | 000000 | ||
| 3,200 | 1,850 | 30 | 3/8" | 4 7/8" | 7 3/4" | 6 1/2" | 10 1/4" | 7 1/2" | 9 1/2" | Steel | 5.4:1, 17.3:1 | 2 | No | 3644T971 | 000000 | ||
| 3,700 | 1,450 | 90 | 7/32" | 7 1/8" | 8 5/8" | 8 3/4" | 11 1/8" | 7 1/8" | 10" | Steel | 5.1:1, 12.2:1 | 2 | No | 3736T4 | 000000 | ||
Hand Winches for Wire Rope—For Lifting
 |  |
Open Winch with Right-Side Handle | Open Winch with Left-Side Handle |
 |  |
Open Winch with Right- or Left-Side Handle | Winch with Enclosed Gears and Right-Side Handle |
These winches are designed for occasional use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Enclosed Gears—Enclosed gears offer protection from dirt and debris.
Left-Side Handle—Winches with a left-side handle are more comfortable for left-handed users to operate, and can be used in spaces where right-side handles can’t fit.
Right- or Left-Side Handle—Winches with a right- or left-side handle are convertible, letting you easily switch between your left and right hand.
Winches | Replacement Handles | Replacement Springs | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | Base | Overall | |||||||||||||||||||||
Min. | Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Each | Each | Each | |||||
Open Body | |||||||||||||||||||||||
Right-Side Handle | |||||||||||||||||||||||
| 50 | 350 | 100 | 84 | 1/8" | 3 7/8" | 5 1/8" | 6" | 5 1/2" | 4 1/8" | 7" | Steel | 3.2:1 | 1 | No | Automatic | 3196T55 | 000000 | 3196T74 | 000000 | 3196T73 | 00000 | ||
| 50 | 800 | 300 | 68 | 3/16" | 3 7/8" | 5 1/8" | 6 1/8" | 6 5/8" | 5 1/2" | 7" | Steel | 4.4:1 | 1 | No | Automatic | 3196T56 | 00000 | 3196T74 | 00000 | 3196T73 | 0000 | ||
| 50 | 1,200 | 500 | 69 | 7/32" | 3 7/8" | 5 1/8" | 6 1/8" | 7 1/2" | 6 3/4" | 7" | Steel | 5.4:1 | 1 | No | Automatic | 3196T57 | 000000 | 3196T74 | 00000 | 3196T73 | 0000 | ||
| 75 | 1,500 | 625 | 60 | 1/4" | 4 3/4" | 5 1/2" | 7 1/4" | 8 1/8" | 6 7/8" | 9" | Steel | 5.4:1 | 1 | No | Automatic | 3196T24 | 000000 | 3196T75 | 00000 | 3196T73 | 0000 | ||
| 175 | 2,500 | 1,000 | 34 | 5/16" | 4 7/8" | 7" | 7 1/8" | 9 1/2" | 7 1/2" | 9" | Steel | 17.3:1 | 1 | No | Automatic | 3196T64 | 000000 | 3196T75 | 00000 | 3196T73 | 0000 | ||
Left-Side Handle | |||||||||||||||||||||||
| 50 | 800 | 300 | 68 | 3/16" | 3 5/8" | 5 1/8" | 6 1/8" | 6 5/8" | 5 1/2" | 7" | Steel | 4.4:1 | 1 | No | Automatic | 3196T81 | 000000 | 3196T74 | 00000 | 3196T73 | 0000 | ||
| 50 | 1,200 | 500 | 69 | 7/32" | 3 5/8" | 5 1/8" | 6 1/8" | 7 1/2" | 6 3/4" | 7" | Steel | 5.4:1 | 1 | No | Automatic | 3196T82 | 000000 | 3196T74 | 00000 | 3196T73 | 0000 | ||
Right- or Left-Side Handle | |||||||||||||||||||||||
| 75 | 1,500 | 700 | 50 | 1/4" | 4 3/4" | 5 1/2" | 7 1/8" | 8 1/8" | 6 7/8" | 9" | Steel | 5.4:1 | 1 | No | Automatic | 3196T83 | 000000 | 3196T77 | 00000 | ——— | 0 | ||
Enclosed Gears | |||||||||||||||||||||||
Right-Side Handle | |||||||||||||||||||||||
| 75 | 1,200 | 625 | 46 | 7/32" | 3 5/8" | 6 1/8" | 7 1/8" | 7 3/4" | 5 3/4" | 12" | Steel | 4:1 | 1 | No | Automatic | 3196T61 | 000000 | 3196T76 | 00000 | ——— | 0 | ||
| 150 | 1,500 | 625 | 45 | 1/4" | 3 5/8" | 7 1/8" | 7 5/8" | 8 5/8" | 6 5/8" | 12" | Steel | 6:1 | 1 | No | Automatic | 3196T44 | 000000 | 3196T76 | 00000 | ——— | 0 | ||
| 300 | 2,500 | 1,300 | 40 | 5/16" | 5 5/8" | 9 5/8" | 9 3/8" | 11 3/8" | 7" | 12" | Steel | 12:1 | 1 | No | Automatic | 3196T62 | 000000 | 3196T76 | 00000 | ——— | 0 | ||
| 500 | 3,500 | 1,825 | 28 | 3/8" | 5 5/8" | 9 5/8" | 9 5/8" | 11 1/4" | 7 1/8" | 12" | Steel | 18.75:1 | 1 | No | Automatic | 3196T63 | 000000 | 3196T76 | 00000 | ——— | 0 | ||
Precise-Positioning Heavy Duty Hand Winches for Wire Rope—For Horizontal Pulling
 |  |
Open Body | Enclosed Gears |
One-piece gears provide more durability than the riveted gears of other hand winches. These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Enclosed Gears—Enclosed gears offer protection from dirt and debris.
Wt. Cap., lb. | Base | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Features | Each | |||
Open Body | ||||||||||||||||||
| 750 | 400 | 59 | 3/16" | 4 1/2" | 5 3/4" | 6 3/8" | 6 1/2" | 5 1/2" | 9" | Steel | 20:1 | 1 | No | One-Piece Machined Gears | 3732T17 | 0000000 | ||
Enclosed Gears | ||||||||||||||||||
| 1,000 | 500 | 61 | 3/16" | 3 1/2" | 4 1/2" | 5 7/8" | 7 3/4" | 5 5/8" | 9" | Steel | 15:1 | 1 | No | One-Piece Machined Gears | 3732T2 | 000000 | ||
| 2,000 | 1,300 | 77 | 1/4" | 5" | 6 3/4" | 8" | 10 1/8" | 7 1/8" | 7" | Steel | 24:1 | 1 | No | One-Piece Machined Gears | 3732T3 | 000000 | ||
| 4,000 | 2,500 | 140 | 3/8" | 8" | 9" | 12 1/2" | 14" | 12 1/2" | 12" | Steel | 26:1 | 1 | No | One-Piece Machined Gears | 3732T4 | 00000000 | ||
Drill-Wind Precise-Positioning Heavy Duty Hand Winches for Wire Rope—For Lifting
 |
Remove the handle to wind this winch with a power drill and move loads more gradually than with other winches. Its one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winch above the load or use winch with a pulley that's mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Wt. Cap., lb. | Base | Overall | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Hex Shank Size | For Max. Drill Speed, rpm | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Features | Each | |||
Enclosed Gears | |||||||||||||||||||||
15 Minutes On, 45 Minutes Off | |||||||||||||||||||||
| 2,000 | 1,200 | 77 | 1/4" | 6 5/8" | 7 1/4" | 11 1/2" | 13 1/2" | 8 1/2" | 11" | 1 1/8" | 400 | Steel | 32:1 | 1 | No | Automatic | One-Piece Machined Gears | 3732T15 | 000000000 | ||
Heavy Duty Hand Winches for Wire Rope—For Lifting
 |
Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Wt. Cap., lb. | Base | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Features | Each | |||
Open Body | ||||||||||||||||||||
| 100 | 1,000 | 500 | 43 | 3/16" | 3 11/16" | 5" | 8 1/8" | 7 9/32" | 6 1/8" | 11" | Steel | 2.85:1 | 1 | No | Automatic | Grease Fitting, One-Piece Machined Gears | 9472T31 | 0000000 | ||
| 100 | 2,000 | 1,200 | 39 | 5/16" | 5 5/16" | 6" | 10 25/32" | 10" | 7 5/32" | 11" | Steel | 14.7:1 | 1 | No | Automatic | Grease Fitting, One-Piece Machined Gears | 3806T67 | 000000 | ||
| 100 | 2,000 | 1,200 | 77 | 5/16" | 8 5/16" | 6" | 13 25/32" | 10" | 7 5/32" | 11" | Steel | 14.7:1 | 1 | No | Automatic | Grease Fitting, One-Piece Machined Gears | 3806T68 | 000000 | ||
| 100 | 4,000 | 2,500 | 83 | 3/8" | 9 1/2" | 12 1/2" | 16 7/16" | 15 1/4" | 10 11/16" | 19" | Steel | 19.54:1 | 1 | No | Automatic | One-Piece Machined Gears | 3806T75 | 00000000 | ||
Drill-Wind Precise-Positioning Hand Winches for Wire Rope—For Horizontal Pulling
 |
Remove the handle to wind these winches with a power drill.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Wt. Cap., lb. | Base | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Hex Shank Size | For Max. Drill Speed, rpm | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Each | |||
Open Body | |||||||||||||||||||
| 2,000 | 800 | 55 | 1/4" | 4 3/8" | 5 1/2" | 6" | 7 1/2" | 5 7/8" | 7" | 5/8" | 600 | Steel | 40.1:1 | 1 | No | 3205T42 | 0000000 | ||
Precise-Positioning Hand Winches for Wire Rope—For Horizontal Pulling
 |
These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Wt. Cap., lb. | Base | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Each | |||
Open Body | |||||||||||||||||
| 1,500 | 725 | 43 | 1/4" | 4 3/4" | 5 1/2" | 6" | 6 3/4" | 6 1/2" | 8" | Steel | 30:1 | 1 | No | 3205T611 | 0000000 | ||
| 2,000 | 900 | 59 | 1/4" | 4 3/4" | 5 1/2" | 6" | 7 1/2" | 6 1/2" | 8" | Steel | 40.1:1 | 1 | No | 3205T621 | 000000 | ||
Precise-Positioning Heavy Duty Hand Winches for Wire Rope—For Lifting
 |
Move loads more gradually than with other winches. These take longer to wind but require less effort. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Wt. Cap., lb. | Base | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Features | Each | |||
Enclosed Gears | ||||||||||||||||||||
| 100 | 1,000 | 500 | 61 | 3/16" | 3 1/2" | 4 1/2" | 11 13/16" | 9 15/16" | 15 17/32" | 11" | Steel | 15:1 | 1 | No | Automatic | One-Piece Machined Gears | 3732T16 | 0000000 | ||
| 100 | 4,000 | 2,500 | 140 | 3/8" | 8" | 9" | 15 1/2" | 14 1/8" | 12 3/4" | 18" | Steel | 26:1 | 1 | No | Automatic | One-Piece Machined Gears | 3732T14 | 00000000 | ||
Hand Winches for Webbing—For Horizontal Pulling
 |
Webbing wraps neatly around the winch to prevent tangles in the line.
Note: Capacity is highest for the first layer of webbing (at least five wraps of webbing on the winch) and decreases as each additional layer of webbing is wound on the winch.
2 Speeds—Winches with two speeds wind quickly in high gear and more easily in low gear than single-speed winches.
Winches | Replacement Webbing with Hook on One End | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | Base | Webbing | Overall | ||||||||||||||||
Max. | Fully Wound | Wd. | Lg. | Wd. | Lg., ft. | Wd. | Lg. | Ht. | Handle Lg. | Material | Hook Opening Wd. | Gear Speed Ratio | No. of Speeds | Each | Each | ||||
Open Body | |||||||||||||||||||
| 1,100 | 500 | 3 5/8" | 5 1/8" | 2" | 15 | 5 1/8" | 7 1/8" | 5 1/4" | 6 3/4" | Steel | 5/8" | 3.7:1 | 1 | 2300T54 | 000000 | 3169T23 | 000000 | ||
| 1,600 | 775 | 3 7/8" | 5 3/8" | 2" | 20 | 5 3/4" | 7 7/8" | 5 3/8" | 9 1/2" | Steel | 5/8" | 5.4:1 | 1 | 2300T55 | 000000 | 3169T25 | 00000 | ||
| 2,000 | 1,050 | 4 3/4" | 7 1/4" | 2" | 20 | 6 1/2" | 10 1/8" | 6 3/4" | 9 1/2" | Steel | 5/8" | 5.4:1, 12.4:1 | 2 | 2300T56 | 000000 | 3169T25 | 00000 | ||
| 2,500 | 1,300 | 4 7/8" | 7 3/4" | 2" | 25 | 6 3/8" | 10 1/4" | 7 1/2" | 9 1/2" | Steel | 5/8" | 5.4:1, 17.3:1 | 2 | 2300T57 | 000000 | 3169T27 | 00000 | ||
| 3,200 | 1,850 | 4 7/8" | 7 3/4" | 2" | 20 | 6 1/2" | 10 1/4" | 7 1/2" | 9 1/2" | Steel | 5/8" | 5.4:1, 17.3:1 | 2 | 2300T58 | 000000 | 3169T28 | 00000 | ||
Corrosion-Resistant Heavy Duty Hand Winches for Wire Rope—For Lifting
 |
These winches are stainless steel for corrosion resistance. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Wt. Cap., lb. | Base | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Features | Each | |||
Open Body | ||||||||||||||||||||
| 100 | 1,000 | 600 | 83 | 1/4" | 5 1/4" | 6" | 9 3/4" | 8 1/4" | 6 7/8" | 11" | Stainless Steel | 3.83:1 | 1 | No | Automatic | Grease Fitting, One-Piece Machined Gears | 23145T21 | 000000000 | ||
| 100 | 2,000 | 1,200 | 39 | 5/16" | 5 5/16" | 6" | 10 3/4" | 10" | 7 1/8" | 11" | Stainless Steel | 14.7:1 | 1 | No | Automatic | Grease Fitting, One-Piece Machined Gears | 23145T22 | 00000000 | ||
Wall-Mount Heavy Duty Hand Winches for Wire Rope—For Lifting
 |  |
Open Body | Fully-Enclosed Body |
Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Fully-Enclosed Body—Fully-enclosed body offers protection from dirt and debris.
Wt. Cap., lb. | Base | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Fully Wound | For Max. Rope Lg., ft. | For Rope Dia. | Wd. | Lg. | Wd. | Lg. | Ht. | Handle Lg. | Material | Gear Speed Ratio | No. of Speeds | Rope with Hook Included | Brake Type | Features | Each | |||
Open Body | ||||||||||||||||||||
| 50 | 250 | 150 | 43 | 1/8" | 2 9/16" | 6 5/8" | 2 9/16" | 6 5/8" | 6 5/8" | 11" | Steel | 1:1 | 1 | No | Automatic | One-Piece Machined Gears | 3224T11 | 0000000 | ||
Fully-Enclosed Body | ||||||||||||||||||||
| 220 | 1,100 | 650 | 46 | 1/4" | 7 7/8" | 11 13/16" | 7 7/8" | 11 13/16" | 11 13/16" | 10" | Steel | 8:1 | 1 | No | Automatic | One-Piece Machined Gears | 3224T23 | 000000 | ||
