Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67 and NEMA 6, they’re sealed against humidity, washdowns, and even temporary submersion. They’ll also stay sealed in dusty conditions.

Mount these lights with the included bracket. It tilts to direct light where you need it.

These lights last at least a year when used at 212° F continuously. And at 131° F, they’ll last almost 7 years.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

The enclosure on these jelly jar lights contains explosions, sparks, and flashes. These lights are safe to use in NEC Class I, II, and III, Division 1 hazardous locations. Certified to a T4 (275° F) or T5 (212° F) temperature classification, their surface stays cool enough to avoid igniting flammable material. They are also ETL and C-ETL listed to meet safety standards in the United States, Canada, and Mexico. All lights are hardwired and mount with fasteners (not included).

Lights with a built-in LED eliminate the need to swap out bulbs. They’re also more energy efficient and produce less heat than lights with an incandescent bulb. They're rated IP67 for protection against temporary submersion. Lights for incandescent bulbs are rated NEMA 4X for protection from washdowns and dust. Designed to resist corrosion from salt water, they’re also UL marine listed.

Contain explosions, sparks, and flashes—the enclosure on these ceiling lights makes them safe to use in NEC Class I and II, Division 1 hazardous locations. They meet NEC hazardous location temperature classifications, so their surface stays cool enough to avoid igniting hazardous gases or dust. Designed to resist corrosion from salt water, they’re also UL marine listed. All lights have adjustable mounting brackets that can rotate 45° in either direction to direct light where you need it.

Style 1 lights are built for harsh environments, like offshore oil rigs. They have been tested to withstand vibration without breaking or shutting down. The mounting bracket matches standard bolt hole patterns.

Lights with a backup battery shine for at least 90 minutes during a power outage to comply with UL 924.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Rated for over a decade of use well above 100° F, these linear bay lights long outlast standard facility lights in high heat. They’re often installed in warehouses located in sweltering climates and in fiery manufacturing facilities, such as steel mills.

Style A lights have outer LED modules that can be rotated to aim some amount of light upwards. This creates uplighting, which reduces glare and eye strain. These lights are rated to resist humidity and impact. Hang them from your ceiling using suspension hardware or thread them onto 3/4″ NPT conduit. Add motion sensors for them to turn on automatically. A remote control is required to adjust the default motion sensor settings.

Style B lights are rated IP66 for protection from washdowns. They're also rated IK10—the highest rating for electrical equipment—and offer four times the impact resistance of Style A lights. Mount them using the included bracket and eyebolt.

Style C lights are ETL listed for wet locations. Their pass-through heat sink prevents dust and debris from building up, keeping them cool without the need for cleaning. Install them using the included suspension hardware or with a mounting bracket (sold separately).

Illuminate machines or monitor processes in environments that reach up to 210° F. These lights have a thick housing that acts as a heat sink to protect the LEDs and driver from overheating. Tough enough for CNC machines, both the housing and glass lens resist impact and vibration. They’re sealed against coolant, lubricant, and chips and shavings. IP rated, they withstand high-temperature washdown sprays and temporary submersion, so they can handle your wettest environments. All have FEP-covered wire leads that withstand heat and hardwire to your 24V DC power supply.

Add a power supply (sold separately) to transform your facility’s 120V AC to 24V DC. Mount the power supply outside of your machine to protect it from heat.