Width Width |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Shrink Temperature Shrink Temperature |
|---|
|
|
For Printer Model For Printer Model |
|---|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
Manufacturer Manufacturer |
|---|
|
Message Type Message Type |
|---|
 |  |
| Blank | Identification |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Heat-Shrink Tape for Composites
Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.
| Wd. | Lg., ft. | Overall Thick. | Material | Adhesive Type | Temperature Range, °F | Shrink Temperature, °F | Color | Each | |
| 3/4" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 000000 |
| 1" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 00000 |
| 1 1/4" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 00000 |
| 1 1/2" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 00000 |
| 2" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 00000 |
| 2 1/2" | 300 | 0.002" | Polyester Plastic | None | 150° to 400° | 150° | Clear | 0000000 | 00000 |
Dymo XTL Label Printer Tape
Heat-shrink tubing conforms to a wire when heat is applied for a tight fit.
Heat-Shrink Tubing
| Manufacturer Model Number | For Printer Model | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
Blank | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1868809 | XTL 300, XTL 500 | 1/4" | 16-7 | 0.05"-0.15" | 0.02" | 9 | White | Black | Wraparound | Polyolefin Plastic | -40° to 255° | 0000000 | 000000 |
| 1868810 | XTL 300, XTL 500 | 1/2" | 10-1 | 0.1"-0.3" | 0.02" | 9 | White | Black | Wraparound | Polyolefin Plastic | -40° to 255° | 0000000 | 000000 |
| 1868811 | XTL 300, XTL 500 | 1" | 4-4/0 | 0.2"-0.6" | 0.02" | 9 | White | Black | Wraparound | Polyolefin Plastic | -40° to 255° | 0000000 | 000000 |
Dymo Rhino Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
Heat-Shrink Tubing
| Manufacturer Model Number | For Printer Model | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| 18051 | Rhino 4200, Rhino 5200, Rhino 6000 | 1/4" | 16-7 | 0.05"-0.15" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 000000 |
| 18052 | Rhino 4200, Rhino 5200, Rhino 6000 | 1/4" | 16-7 | 0.05"-0.15" | 0.02" | 5 | Yellow | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18053 | Rhino 4200, Rhino 5200, Rhino 6000 | 3/8" | 12-4 | 0.08"-0.23" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18054 | Rhino 4200, Rhino 5200, Rhino 6000 | 3/8" | 12-4 | 0.08"-0.23" | 0.02" | 5 | Yellow | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 1805443 | Rhino 6000 | 1" | 4-4/0 | 0.2"-0.6" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18055 | Rhino 4200, Rhino 5200, Rhino 6000 | 1/2" | 10-1 | 0.1"-0.3" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18056 | Rhino 4200, Rhino 5200, Rhino 6000 | 1/2" | 10-1 | 0.1"-0.3" | 0.02" | 5 | Yellow | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18057 | Rhino 4200, Rhino 5200, Rhino 6000 | 3/4" | 6-4/0 | 0.16"-0.48" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
| 18058 | Rhino 4200, Rhino 5200, Rhino 6000 | 3/4" | 6-4/0 | 0.16"-0.48" | 0.02" | 5 | Yellow | Black | Wraparound | Polyolefin Plastic | 10° to 250° | 0000000 | 00000 |
Brady BMP21 Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
Heat-Shrink Tubing
| Manufacturer Model Number | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| M21-125-C-342 | 1/8" | 22-16 | 0.05"-0.11" | 0.02" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M21-125-C-342-YL | 1/8" | 22-16 | 0.05"-0.11" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-187-C-342 | 3/16" | 20-10 | 0.06"-0.15" | 0.02" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-187-C-342-YL | 3/16" | 20-10 | 0.06"-0.15" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-250-C-342 | 1/4" | 16-8 | 0.09"-0.22" | 0.025" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-250-C-342-YL | 1/4" | 16-8 | 0.09"-0.22" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-375-C-342 | 3/8" | 12-4 | 0.13"-0.32" | 0.025" | 7 | White | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-375-C-342-YL | 3/8" | 12-4 | 0.13"-0.32" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
Brady BMP41/BMP51/BMP53 Label Printer Tape
Create labels for cable and wire using your Brady printer. This printer tape is heat-shrink tubing, so after printing on it, slide the label over an open end of your wire and apply heat to make it fit tightly.
| Manufacturer Model Number | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
Heat-Shrink Tubing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For BMP41, BMP51, and BMP53 Printer Models | ||||||||||||
| M-125-075-342 | 3/4" | 22-16 | 0.05"-0.11" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
| M-187-075-342 | 3/4" | 20-10 | 0.06"-0.15" | 0.02" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M-250-075-342 | 3/4" | 16-8 | 0.09"-0.22" | 0.025" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M-375-075-342 | 3/4" | 12-4 | 0.13"-0.32" | 0.025" | 5 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
For BMP51 and BMP53 Printer Models | ||||||||||||
| M-125-1-342 | 1" | 22-16 | 0.05"-0.11" | 0.02" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M-187-1-342 | 1" | 20-10 | 0.06"-0.15" | 0.02" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M-250-1-342 | 1" | 16-8 | 0.09"-0.22" | 0.025" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 00000 |
| M-375-1-342 | 1" | 12-4 | 0.13"-0.32" | 0.025" | 6 | White | Black | Wraparound | Polyolefin Plastic | -60° to 275° | 0000000 | 000000 |
Brady BMP71 Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
Heat-Shrink Tubing
For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Wd. | Gauge | OD | Thick. | Roll Lg., ft. | Color | Mount Type | Material | Temp. Range, °F | Each | |
| M71-125-1-342 | 1" | 22-16 | 0.05"-0.11" | 0.02" | 8 | White | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M71-125-1-342YL | 1" | 22-16 | 0.05"-0.11" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M71-187-1-342 | 1" | 20-10 | 0.06"-0.15" | 0.02" | 8 | White | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M71-187-1-342YL | 1" | 20-10 | 0.06"-0.15" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M71-250-1-342 | 1" | 16-8 | 0.09"-0.22" | 0.025" | 8 | White | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M71-250-1-342YL | 1" | 16-8 | 0.09"-0.22" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M71-375-1-342 | 1" | 12-4 | 0.13"-0.32" | 0.025" | 8 | White | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M71-375-1-342YL | 1" | 12-4 | 0.13"-0.32" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
Epson (K-Sun) Label Printer Tape
Heat-shrink tubing conforms to a wire when heat is applied for a tight fit.
Heat-Shrink Tubing
| Manufacturer Model Number | Color | Message Color | For Printer Model | Wd. | For Wire OD | Thick. | Roll Lg., ft. | Mount Type | Material | Temp. Range, °F | Each | |
| 203B20BWPX | White | Black | LabelShop, LabelWorks, LabelWorks PX | 1/8" | 0.06"-0.15" | 0.017" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 000000 |
| 203B20BYPX | Yellow | Black | LabelShop, LabelWorks, LabelWorks PX | 1/8" | 0.06"-0.15" | 0.017" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 205STBRPX | Red | Black | LabelShop, LabelWorks, LabelWorks PX | 3/16" | 0.06"-0.15" | 0.012" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 205STBWPX | White | Black | LabelShop, LabelWorks, LabelWorks PX | 3/16" | 0.06"-0.15" | 0.012" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 205STBYPX | Yellow | Black | LabelShop, LabelWorks, LabelWorks PX | 3/16" | 0.06"-0.15" | 0.012" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 205STWBPX | Black | White | LabelShop, LabelWorks, LabelWorks PX | 3/16" | 0.06"-0.15" | 0.012" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 208B20BWPX | White | Black | LabelShop, LabelWorks, LabelWorks PX | 1/4" | 0.1"-0.22" | 0.017" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 210STBWPX | White | Black | LabelShop, LabelWorks, LabelWorks PX | 3/8" | 0.13"-0.32" | 0.028" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 0000000 | 00000 |
| 211STBRPX | Red | Black | LabelShop, LabelWorks, LabelWorks PX | 1/2" | 0.19"-0.45" | 0.011" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 211STBWPX | White | Black | LabelShop, LabelWorks, LabelWorks PX | 1/2" | 0.19"-0.45" | 0.011" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 211STBYPX | Yellow | Black | LabelShop, LabelWorks, LabelWorks PX | 1/2" | 0.19"-0.45" | 0.011" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
| 211STWBPX | Black | White | LabelShop, LabelWorks, LabelWorks PX | 1/2" | 0.19"-0.45" | 0.011" | 8 | Wraparound | Polyolefin Plastic | -60° to 220° | 00000000 | 00000 |
Heat-Shrink Film
Heat this film to create a form-fitting barrier around single packages and small shipments to protect them from moisture and dirt.
PVC film requires less heat to shrink. Polyolefin film is food grade and is more flexible than PVC.
Note: One mil equals 0.001".
| Wd. | Thick., mil | Lg., ft. | Color | Shrink Temperature Range, °F | Specifications Met | Each | |
PVC Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 10" | 0.75 | 500 | Clear | 200°-275° | __ | 0000000 | 000000 |
| 12" | 0.75 | 500 | Clear | 200°-275° | __ | 0000000 | 00000 |
| 16" | 0.75 | 500 | Clear | 200°-275° | __ | 0000000 | 00000 |
| 26" | 1 | 500 | Clear | 200°-275° | __ | 0000000 | 000000 |
Polyolefin Plastic | |||||||
| 10" | 0.6 | 500 | Clear | 270°-300° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
| 10" | 0.75 | 500 | Clear | 270°-300° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
| 18" | 0.75 | 500 | Clear | 270°-300° | FDA Compliant 21 CFR 177.1520 | 00000000 | 000000 |
Heavy Duty Heat-Shrink Film
This film is thicker than standard heat-shrink film, so it's ideal for large and irregularly shaped objects. Heat it to create a form-fitting barrier and protect packages from moisture and dirt. Material is folded on the roll for compact storage.
The 10 or 12 mil thick film is best for protecting objects in extreme conditions, such as goods shipped on the deck of an ocean freighter. It’s also good for safeguarding heavy machinery, sections of scaffolding, and other large items while in transport.
Tape holds seams together and patches holes.
Note: One mil equals 0.001".
| Wd., ft. | Thick., mil | Lg., ft. | Roll Wd., ft. | Dia. | Core ID | Clarity | Color | Shrink Temperature, °F | Each | |
Polyethylene Plastic | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 7 | 150 | 4 | 10" | 3" | Opaque | White | 275° | 00000000 | 0000000 |
| 17 | 7 | 110 | 5 | 9" | 3" | Opaque | White | 275° | 000000 | 000000 |
| 20 | 10 | 100 | 6 | 10" | 3" | Opaque | White | 275° | 00000000 | 000000 |
| 20 | 12 | 100 | 6 | 11" | 3" | Opaque | White | 275° | 00000000 | 000000 |
| 24 | 7 | 120 | 5 | 12" | 3" | Opaque | White | 275° | 000000 | 000000 |
| 32 | 7 | 100 | 5 | 11" | 3" | Opaque | White | 275° | 000000 | 000000 |