Overall Width Overall Width |
|---|
|
|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
Center-to-Center Mounting Hole Width Center-to-CenterMounting Hole Width |
|---|
|
|
|
Hardness Rating Hardness Rating |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mounting Hole Style Mounting Hole Style |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
OD OD |
|---|
Height Height |
|---|
Maximum Dynamic Load Maximum Dynamic Load |
|---|
About Durometer Hardness Scales
More
Vehicle-Mount Bumpers
A
B
C
D
E
F
These dock bumpers absorb shock and prevent damage to docks and vehicles. They are weather and abrasion resistant.
Reinforced mounting holes have a steel washer above the mounting hole for added strength.
Style F requires you to drill your own holes.
Overall | Ctr.-to-Ctr. Mount. Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. | Wd. | Dp. | Material | Hardness Rating | Temperature Range, °F | Wd. | Ht. | Mount. Fasteners Included | No. of Mount. Holes | Mount. Hole Dia. | Counterbore Dia. | Features | Each | |
| A | 4" | 6" | 3 3/8" | Rubber | Hard | -20° to 120° | 2 1/2" | __ | No | 2 | 1" | 2" | __ | 00000000 | 000000 |
| B | 3" | 4 7/8" | 3 1/2" | Rubber | Medium Hard | -20° to 120° | 2 1/2" | __ | No | 2 | 1/2" | 1 1/8" | Reinforced Mounting Holes | 00000000 | 0000 |
| B | 3 1/2" | 6" | 3 1/2" | Rubber | Medium Hard | -20° to 120° | 3 1/2" | __ | No | 2 | 9/16" | 1 1/4" | Reinforced Mounting Holes | 0000000 | 00000 |
| C | 2 1/2" | 7 3/4" | 2" | Rubber | Hard | -20° to 120° | 4 1/4" | __ | No | 2 | 9/16" | 1 1/8" | Reinforced Mounting Holes | 00000000 | 0000 |
| C | 2 1/2" | 16" | 2 1/8" | Rubber | Medium Hard | -20° to 120° | 6 3/8" | __ | No | 3 | 1/2" | 1 1/8" | Reinforced Mounting Holes | 00000000 | 00000 |
| C | 3" | 6" | 3 1/2" | Rubber | Medium Hard | -20° to 120° | 3" | __ | No | 2 | 1/2" | 1 1/2" | Reinforced Mounting Holes | 00000000 | 0000 |
| C | 4 1/2" | 10" | 3" | Rubber | Medium Hard | -20° to 120° | 5" | __ | No | 2 | 5/8" | 1 1/2" | Reinforced Mounting Holes | 0000000 | 00000 |
| C | 4 1/2" | 20" | 3" | Rubber | Medium Hard | -20° to 120° | 5" | __ | No | 4 | 5/8" | 1 1/2" | Reinforced Mounting Holes | 0000000 | 00000 |
| C | 4 1/2" | 30" | 3" | Rubber | Medium Hard | -20° to 120° | 5" | __ | No | 6 | 5/8" | 1 1/2" | Reinforced Mounting Holes | 0000000 | 00000 |
| D | 5 1/2" | 7 1/2" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 5 1/2" | 3" | No | 4 | 5/8" | 1 3/8" | __ | 00000000 | 00000 |
| D | 5 1/2" | 7 1/2" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 5 1/2" | 3" | No | 4 | 5/8" | 1 3/8" | __ | 00000000 | 00000 |
| E | 4 1/4" | 12" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 6" | __ | No | 2 | 3/4" | __ | __ | 0000000 | 00000 |
| E | 4 1/4" | 18" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 12" | __ | No | 2 | 3/4" | __ | __ | 0000000 | 00000 |
| E | 4 1/4" | 24" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 18" | __ | No | 2 | 3/4" | __ | __ | 0000000 | 00000 |
| E | 4 1/4" | 36" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | 15" | __ | No | 3 | 3/4" | __ | __ | 0000000 | 00000 |
| F | 4 1/4" | 48" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | __ | __ | __ | __ | __ | __ | __ | 0000000 | 00000 |
| F | 4 1/4" | 72" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | __ | __ | __ | __ | __ | __ | __ | 0000000 | 00000 |
| F | 4 1/4" | 120" | 3 3/4" | Rubber | Medium Hard | -20° to 120° | __ | __ | __ | __ | __ | __ | __ | 0000000 | 000000 |
Extra-Strength Dock-Mount Bumpers
Horizontal Mount
Horizontal Mount with 3/8" Thick Steel Face Plate
Vertical Mount
Vertical Mount with 3/8" Thick Steel Face Plate
Multiple layers of shock-absorbing rubber make these bumpers more chip and abrasion resistant than standard dock bumpers. They prevent damage to docks and vehicles. Layers are strung on rods and bolted together at both ends with angle brackets.
Bumpers with steel face plate are stronger than bumpers without a face plate.
Overall | Ctr.-to-Ctr. Mount. Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Bumper Wd. | Material | Hardness Rating | Wd. | Ht. | Mount. Fasteners Included | No. of Mount. Holes | Mount. Hole Dia. | Each | |
Horizontal Mount | ||||||||||||
| 6" | 26" | 4 1/2" | 20" | Rubber | Hard | 24" | 3" | No | 4 | 3/4" | 0000000 | 000000 |
| 6" | 38" | 4 1/2" | 32" | Rubber | Hard | 36" | 3" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 16" | 4 1/2" | 10" | Rubber | Hard | 14" | 6" | No | 4 | 3/4" | 0000000 | 00000 |
| 10" | 16" | 6" | 10" | Rubber | Hard | 14" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 16" | 9" | 10" | Rubber | Hard | 14" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 20" | 4 1/2" | 14" | Rubber | Hard | 18" | 6" | No | 4 | 3/4" | 0000000 | 00000 |
| 10" | 20" | 6" | 14" | Rubber | Hard | 18" | 6" | No | 4 | 3/4" | 0000000 | 00000 |
| 10" | 26" | 4 1/2" | 20" | Rubber | Hard | 24" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 26" | 6" | 20" | Rubber | Hard | 24" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 26" | 9" | 20" | Rubber | Hard | 24" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 38" | 4 1/2" | 32" | Rubber | Hard | 36" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 10" | 38" | 6" | 32" | Rubber | Hard | 36" | 6" | No | 4 | 3/4" | 0000000 | 000000 |
| 12" | 14" | 4 1/2" | 8" | Rubber | Hard | 12" | 4" | No | 6 | 3/4" | 0000000 | 00000 |
| 12" | 14" | 6" | 8" | Rubber | Hard | 12" | 4" | No | 6 | 3/4" | 0000000 | 00000 |
| 12" | 16" | 4 1/2" | 10" | Rubber | Hard | 14" | 4" | No | 6 | 3/4" | 0000000 | 00000 |
| 12" | 16" | 6" | 10" | Rubber | Hard | 14" | 4" | No | 6 | 3/4" | 0000000 | 000000 |
| 12" | 20" | 4 1/2" | 14" | Rubber | Hard | 18" | 4" | No | 6 | 3/4" | 0000000 | 000000 |
| 12" | 26" | 4 1/2" | 20" | Rubber | Hard | 24" | 4" | No | 6 | 3/4" | 0000000 | 000000 |
| 12" | 26" | 6" | 20" | Rubber | Hard | 24" | 4" | No | 6 | 3/4" | 0000000 | 000000 |
| 12" | 38" | 4 1/2" | 32" | Rubber | Hard | 36" | 4" | No | 6 | 3/4" | 0000000 | 000000 |
Horizontal Mount with 3/8" Thick Steel Face Plate | ||||||||||||
| 10" | 16" | 5 1/4" | 10" | Rubber | Hard | 14" | 6" | No | 4 | 13/16" | 0000000 | 000000 |
| 10" | 16" | 6 3/4" | 10" | Rubber | Hard | 14" | 6" | No | 4 | 13/16" | 0000000 | 000000 |
| 10" | 26" | 5 1/4" | 20" | Rubber | Hard | 24" | 6" | No | 4 | 13/16" | 0000000 | 000000 |
| 10" | 26" | 6 3/4" | 20" | Rubber | Hard | 24" | 6" | No | 4 | 13/16" | 0000000 | 000000 |
| 12" | 16" | 5 1/4" | 10" | Rubber | Hard | 14" | 4" | No | 6 | 13/16" | 0000000 | 000000 |
| 12" | 26" | 5 1/4" | 20" | Rubber | Hard | 24" | 4" | No | 6 | 13/16" | 0000000 | 000000 |
Vertical Mount | ||||||||||||
| 20" | 13" | 4 1/2" | 7" | Rubber | Hard | 11" | 7" | No | 6 | 13/16" | 0000000 | 000000 |
| 20" | 14" | 6" | 8" | Rubber | Hard | 12" | 7" | No | 6 | 13/16" | 0000000 | 000000 |
| 24" | 13" | 4 1/2" | 7" | Rubber | Hard | 11" | 9" | No | 6 | 13/16" | 0000000 | 000000 |
| 24" | 14" | 6" | 8" | Rubber | Hard | 12" | 9" | No | 6 | 13/16" | 0000000 | 000000 |
| 36" | 13" | 4 1/2" | 7" | Rubber | Hard | 11" | 10" | No | 8 | 13/16" | 0000000 | 000000 |
Vertical Mount with 3/8" Thick Steel Face Plate | ||||||||||||
| 20" | 13" | 5 1/4" | 8" | Rubber | Hard | 11" | 7" | No | 6 | 13/16" | 0000000 | 000000 |
| 20" | 13" | 6 3/4" | 8" | Rubber | Hard | 11" | 7" | No | 6 | 13/16" | 0000000 | 000000 |
| 24" | 13" | 5 1/4" | 8" | Rubber | Hard | 11" | 9" | No | 6 | 13/16" | 0000000 | 000000 |
| 24" | 13" | 6 3/4" | 8" | Rubber | Hard | 11" | 9" | No | 6 | 13/16" | 0000000 | 000000 |
Dock-Mount Bumpers
1
2
3
4
5
These bumpers are weather resistant, abrasion resistant, and fiber-reinforced for more impact resistance than vehicle-mount bumpers. They absorb shock and prevent damage to docks and vehicles.
Reinforced mounting holes have a steel washer above the mounting hole for added strength.
Overall | Ctr.-to-Ctr. Mount. Hole | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Ht. (A) | Ht. (B) | Material | Hardness Rating | Temperature Range, °F | Wd. | Ht. | Mount. Fasteners Included | No. of Mount. Holes | Mount. Hole Dia. | Counterbore Dia. | Features | Each | ||
| 1 | 10" | 13" | 4" | __ | __ | Rubber | Hard | -20° to 120° | 7" | __ | No | 2 | 3/4" | 2 1/8" | Reinforced Mounting Holes | 0000000 | 000000 |
| 1 | 10" | 18" | 4" | __ | __ | Rubber | Hard | -20° to 120° | 10" | __ | No | 2 | 1" | 3" | Reinforced Mounting Holes | 0000000 | 00000 |
| 2 | 12" | 23 3/4" | 6 1/2" | __ | __ | Rubber | Hard | -20° to 120° | 18" | 6" | No | 4 | 3/4" | 1 7/8" | Two Reflectors | 0000000 | 000000 |
| 2 | 12" | 24" | 3" | __ | __ | Rubber | Hard | -20° to 120° | 18" | 6" | No | 4 | 3/4" | 1 7/8" | Two Reflectors | 000000 | 00000 |
| 2 | 12" | 24" | 4" | __ | __ | Rubber | Hard | -20° to 120° | 18" | 6" | No | 4 | 3/4" | 1 7/8" | Two Reflectors | 000000 | 00000 |
| 2 | 13" | 12" | 4" | __ | __ | Rubber | Hard | -20° to 120° | 7" | 9" | No | 4 | 3/4" | 1 1/2" | __ | 000000 | 00000 |
| 3 | 9" | 18" | 2" | __ | __ | Rubber | Hard | -20° to 120° | 9" | __ | No | 2 | 3/4" | __ | __ | 000000 | 00000 |
| 3 | 9" | 18" | 4" | __ | __ | Rubber | Hard | -20° to 120° | 9" | __ | No | 2 | 3/4" | __ | __ | 0000000 | 00000 |
| 4 | 17 1/4" | 17 1/4" | 4" | 9 1/2" | 8" | Rubber | Hard | -20° to 120° | 10" | 10" | No | 3 | 1 1/8" | 2 3/4" | __ | 000000 | 00000 |
| 5 | 21" | 21" | 3 1/4" | 9 7/8" | 11 1/8" | Rubber | Hard | -20° to 120° | 16" | 14" | No | 3 | 3/4" | 1 3/4" | One Reflector | 000000 | 00000 |
Crane Bumpers
1
2
3
4
Designed to withstand repeated heavy hits on bridge or ceiling cranes, these bumpers protect walls or beams as well as extend crane life. Made of polyurethane, all are abrasion resistant and are reinforced with a steel base plate for strength. These bumpers have either a hard or medium-hard rating to withstand high levels of impact. They're nonmarking and can be used outdoors. Mount them with screws.
Style 2 and 3 bumpers have a retaining loop for attaching a cable or lanyard.
Style 3 bumpers have dual plates and are commonly used as cushioned wheel stops.
Style 4 bumpers are for use with high-speed cranes that require greater deflection lengths.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | Base Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Ht. | Max. Dynamic Load, ft.-lbs. | Dia. | Ctr.-to-Ctr. | Lg. | Wd. | Thick. | Retaining Loop ID | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Each | |
Style 1 | |||||||||||||||
Black Polyurethane Rubber with Steel Base Plate | |||||||||||||||
| 1 5/8" | 1 1/4" | 30 | 7/32" | 1 37/64" | 2" | 2" | 3/16" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 000000 |
| 2" | 1 3/4" | 60 | 1/4" | 1 31/32" | 2 1/2" | 2 1/2" | 3/16" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 00000 |
| 2 1/2" | 2" | 230 | 1/4" | 2 31/64" | 3" | 3" | 1/4" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 000000 |
| 3 1/4" | 2 1/2" | 220 | 3/8" | 3 5/32" | 4" | 4" | 1/4" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 000000 |
| 4" | 3 1/4" | 980 | 3/8" | 3 15/16" | 5" | 5" | 5/16" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 000000 |
| 5" | 4" | 900 | 7/16" | 4 59/64" | 6 1/4" | 6 1/4" | 5/16" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 0000000 | 000000 |
| 6 1/2" | 5" | 3,980 | 7/16" | 6 19/64" | 8" | 8" | 3/8" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 00000000 | 000000 |
| 8" | 6 1/2" | 7,840 | 9/16" | 7 7/8" | 10" | 10" | 3/8" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 00000000 | 000000 |
| 10" | 8" | 15,000 | 1" | 9 27/32" | 12 3/8" | 12 3/8" | 1/2" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 00000000 | 00000000 |
| 12 1/2" | 10" | 29,400 | 13/16" | 12 13/32" | 15 3/4" | 15 3/4" | 1/2" | __ | -60° to 220° | Yes | Hard | Durometer 80A | Yes | 00000000 | 00000000 |
Style 2 | |||||||||||||||
Red Polyurethane Rubber with Steel Base Plate | |||||||||||||||
| 2" | 3" | 310 | 9/16" | 3" | 5" | 5" | 3/8" | 3/8" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 3" | 4 1/2" | 520 | 9/16" | 4 1/2" | 6 1/2" | 6 1/2" | 1/2" | 1/2" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 0000000 | 000000 |
| 4" | 6" | 2,480 | 9/16" | 6" | 8" | 8" | 1/2" | 1/2" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 0000000 | 000000 |
| 5" | 7 1/2" | 2,400 | 9/16" | 7 1/2" | 10" | 10" | 1/2" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 0000000 | 000000 |
| 6" | 9" | 8,390 | 13/16" | 9" | 12" | 12" | 3/4" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 0000000 | 000000 |
| 7" | 10 1/2" | 13,000 | 13/16" | 10 1/2" | 13 1/2" | 13 1/2" | 3/4" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 8" | 12" | 19,500 | 13/16" | 12" | 15" | 15" | 3/4" | 7/8" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 9" | 13 1/2" | 28,000 | 15/16" | 13" | 16" | 16" | 7/8" | 7/8" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 00000000 |
| 10" | 15" | 38,500 | 15/16" | 15" | 19" | 19" | 7/8" | 7/8" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 00000000 |
| 11" | 16 1/2" | 51,500 | 1 1/16" | 16" | 20" | 20" | 1" | 1 1/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 0000000 | 00000000 |
| 12" | 18" | 67,000 | 1 1/16" | 18" | 22" | 22" | 1" | 1 1/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 00000000 |
Style 3 | |||||||||||||||
Red Polyurethane Rubber with Steel Base Plate | |||||||||||||||
| 2" | 3" | 310 | 9/16" | 3" | 5" | 5" | 3/8" | 3/8" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 3" | 4 1/2" | 1,050 | 9/16" | 4 1/2" | 6 1/2" | 6 1/2" | 1/2" | 1/2" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 4" | 6" | 2,480 | 9/16" | 6" | 8" | 8" | 1/2" | 1/2" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 5" | 7 1/2" | 4,860 | 9/16" | 7 1/2" | 10" | 10" | 1/2" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 6" | 9" | 8,390 | 13/16" | 9" | 12" | 12" | 3/4" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
| 7" | 10 1/2" | 13,000 | 13/16" | 10 1/2" | 13 1/2" | 13 1/2" | 3/4" | 3/4" | -60° to 220° | Yes | Hard | Durometer 90A | Yes | 00000000 | 000000 |
Style 4 | |||||||||||||||
Black Polyurethane Rubber with Steel Base Plate | |||||||||||||||
| 80mm | 80mm | 270 | 7/16" | 80mm | 4" | 4" | 1/4" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 80mm | 120mm | 410 | 7/16" | 80mm | 4" | 4" | 1/4" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 100mm | 100mm | 530 | 9/16" | 100mm | 5" | 5" | 5/16" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 0000000 | 000000 |
| 100mm | 150mm | 800 | 9/16" | 100mm | 5" | 5" | 5/16" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 125mm | 125mm | 1,050 | 11/16" | 125mm | 6 1/4" | 6 1/4" | 5/16" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 125mm | 187.5mm | 1,580 | 11/16" | 125mm | 6 1/4" | 6 1/4" | 5/16" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 160mm | 160mm | 2,210 | 11/16" | 160mm | 8" | 8" | 3/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 160mm | 240mm | 3,310 | 11/16" | 160mm | 8" | 8" | 3/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 200mm | 200mm | 4,310 | 13/16" | 200mm | 10" | 10" | 3/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 200mm | 300mm | 6,470 | 13/16" | 200mm | 10" | 10" | 3/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 250mm | 250mm | 8,420 | 13/16" | 250mm | 12 3/8" | 12 3/8" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000 |
| 250mm | 375mm | 12,500 | 13/16" | 250mm | 12 3/8" | 12 3/8" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 315mm | 315mm | 16,500 | 13/16" | 315mm | 15 3/4" | 15 3/4" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 0000000 | 00000000 |
| 315mm | 472.5mm | 25,000 | 13/16" | 315mm | 15 3/4" | 15 3/4" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 406mm | 406mm | 36,000 | 1 1/16" | 400mm | 19 1/2" | 19 1/2" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 406mm | 610mm | 54,000 | 1 1/16" | 400mm | 19 1/2" | 19 1/2" | 1/2" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 516mm | 516mm | 74,000 | 1 1/16" | 500mm | 23 5/8" | 23 5/8" | 5/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 516mm | 775mm | 111,000 | 1 1/16" | 500mm | 23 5/8" | 23 5/8" | 5/8" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 600mm | 600mm | 116,000 | 1 1/16" | 600mm | 28 3/4" | 28 3/4" | 3/4" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 00000000 |
| 600mm | 900mm | 175,000 | 1 1/16" | 600mm | 28 3/4" | 28 3/4" | 3/4" | __ | -60° to 220° | Yes | Medium Hard | Durometer 60A | Yes | 00000000 | 000000000 |