Extra-long bits allow access to hard-to-reach fasteners.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

With more than double the clearance of standard sockets, these sockets access nuts on extra-long bolts.

Pivot the head to access fasteners from an angle.

Eliminate the risk of your socket falling while reaching into your workspace with these flex sockets that have an integrated extension.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Pivot the head to access fasteners from an angle.

Reach nuts obstructed by a fluid line or other barrier with these wrench heads.

Attach one of these heads to your square-drive ratchet or torque wrench to extend its reach or to access spaces with limited vertical clearance.

Pivot the head to access fasteners from an angle.

These sockets are made to withstand the high torque and force of impact tools.

Extra-long bits help you access hard-to-reach fasteners.

Achieve the best possible grip on hex fasteners and prevent rounding.

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Extra length allows access to fasteners on long bolts.

The 12-point shape quickly positions on hex fasteners.

Pivot the head to access fasteners from an angle.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

The short bit on these sockets fits in spaces where height clearance is limited.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Suitable for occasional maintenance work, these sets are imported.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Two spring-loaded balls inside these sockets firmly hold nuts and bolts in place as you turn them, including nonmagnetic fasteners like stainless steel screws.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

Attach one of the heads in these sets to a torque wrench for more leverage to loosen a stubborn fastener.

Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

Pivot the head to access fasteners from an angle.

Convert your standard 6-point sockets into hex bit sockets with these bits.

Store sockets on posts marked with the size.

Hold different square drive sizes on the four clip rails stored in these trays.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The 25° offset heads give you additional clearance to turn hard-to-reach fasteners.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.

The long handle provides extra leverage—add an extension to increase it even more.

Also known as half-moon and obstruction wrenches, the shape lets you reach around obstacles and into machinery.

Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.

The heads are offset to provide clearance for reaching over obstructions.

These lightweight tools are also known as AN (Army-Navy) wrenches.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Fit the narrow head into tight spaces and around thin fasteners.