McMaster-Carr logo
    Filter by
    System of Measurement
    Drive Size
    Tip Style
    Socket Style
    Square Drive Size
    Attribute Image
    Hex Shank Size
    Socket Type
    For Bit Shank Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Industrial Info Compare
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    84 Products

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    271 Adapter
    1 Drive Tool
    25 Bits    		Clutch: 1/8", 5/32" (1" O'all Lg.)
    Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.)
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)    		2 1/4" Lg. Bit Adapter for Power Tools7 3/4" Lg. Bit ScrewdriverSteel
    		Plastic Case53365A43000000
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteel
    		Plastic Case5996A400000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteel
    		Plastic Case5996A1200000
    401 Drive Tool
    2 Adapters
    37 Bits    		Clutch: 5/32" (1" O'all Lg.)—1 ea.
    Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea.
    Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea.
    Slotted: 9/32" (1" O'all Lg.)—2 ea.
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.    		1 7/8" Lg. Bit Adapter for Power Tools
    1/4" Male Square Drive × 1/4" Hex Shank Adapter    		7 1/2" Lg. Bit ScrewdriverSteel
    		Plastic Case8533A8300000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—Steel
    		Plastic Case2599N100000
     
    1/4" and 5/16" Hex Shank Size
    351 Extension (2 3/8" Lg.)
    2 Drive Tools
    32 Bits    		Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8", 9/64", 7/32", 1/4" (1" O'all Lg.)
    Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.)
    Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.)
    Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx 1/4" Hex Shank: T10, T15, T20, T25, T27, T30 (1" O'all Lg.)
    Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.)    		—5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver    		Steel
    		Plastic Case52815A15000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    5050 BitsHex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea.
    Hex (Inch): 5/32" (2" O'all Lg.)—2 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16" (2" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27, T30, T40 (2" O'all Lg.)—1 ea.
    Torx: T25 (2" O'all Lg.)—2 ea.    		——Steel
    		Plastic Case2599N2000000
     

    Maintenance Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Torx Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Hex Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Tamper-Resistant Torx Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For External Torx Drives. Maintenance Bit Socket Sets.

    For

    Torx

    Drives

    For

    Hex

    Drives

    For

    Tamper-Resistant

    Torx Drives

    For

    External

    Torx

    Drives

    Image of Specification. Front orientation. For Phillips Drives.
    Image of Specification. Front orientation. For Slotted Drives.
    Image of Specification. Front orientation. For Pozidriv® Drives.

    For

    Phillips

    Drives

    For

    Slotted

    Drives

    For

    Pozidriv®

    Drives

    Keep a convenient variety of drive styles and sizes of bit sockets on hand. For use with hand-drive tools only.
    No. of
    Pieces
    Sockets Included
    Material (Socket Style)
    Container
    Type
    For Drive Style
    Each
    1/4", 3/8" Square Drive
    323/8" Hex Bit Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 7/8" O'all Lg.); 5/16", 3/8" (2" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm (1 7/8" O'all Lg.); 8 mm, 9 mm, 10 mm (2" O'all Lg.)
    1/4" Torx Bit Sockets: T10, T15, T20, T25, T27, T30 (1 7/16" O'all Lg.)
    3/8" Phillips Bit Sockets: No. 1, No. 2, No. 3 (1 7/8" O'all Lg.)
    3/8" Slotted Bit Sockets: 3/16" (1" O'all Lg.); 1/4", 5/16" (1 7/8" O'all Lg.); 3/8" (1" O'all Lg.)
    3/8" Torx Bit Sockets: T40, T45, T47, T50 (2" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets)Plastic CaseHex, Phillips, Slotted, Torx5534A22000000
     
    3/8" Square Drive
    373/8" Hex Bit Sockets (Inch): 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (2" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm (2" O'all Lg.)
    3/8" Torx Bit Sockets: T20, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Tamper-Resistant Torx Bit Sockets: T15, T20, T25, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Phillips Bit Sockets: No. 1, No. 2, No. 3 (2" O'all Lg.)
    3/8" Slotted Bit Sockets: 4 mm, 5 mm, 6 mm (2" O'all Lg.)
    3/8" Pozidriv Bit Sockets: No. 2 (2" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets)Foam TrayHex, Phillips, Pozidriv®, Slotted, Tamper-Resistant Torx, Torx93111A12000000
     
    1/4", 3/8", 1/2" Square Drive
    801/4" Hex Bit Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/2" O'all Lg.)
    1/4" Hex Bit Sockets (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm (1 1/2" O'all Lg.)
    1/4” Hex Bit Sockets: T8, T10, T15, T20, T25, T27, T30 (6" O'all Lg.)
    3/8" Hex Bit Sockets (Inch): 5/16", 3/8" (1 7/8" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 6 mm, 7 mm, 8 mm, 9 mm, 10 mm (1 7/8" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm (6" O'all Lg.)
    1/2" External Torx Standard Sockets: E18, E20, E22, E24 (1 1/2 O'all Lg.)
    1/2" Hex Bit Sockets (Inch): 7/16", 1/2", 9/16", 5/8" (2" O'all Lg.)
    1/2" Hex Bit Sockets (Metric): 12 mm, 14 mm, 17 mm (2" O'all Lg.)
    1/4" Torx Bit Sockets: T8, T10, T15, T20, T25, T27, T30 (1 1/2" O'all Lg.)
    3/8" Torx Bit Sockets: T30, T40, T45, T50, T55 (1 7/8" O'all Lg.)
    3/8" Torx Bit Sockets: T40, T45, T50 (6" O'all Lg.)
    1/2" Tamper-Resistant Torx Bit Sockets: T60 (2" O'all Lg.)
    1/2" Torx Bit Sockets: T60 (2" O'all Lg.)
    1/4" External Torx Standard Sockets: E4, E5, E6, E7, E8 (1 1/8" O'all Lg.)
    1/4" Tamper-Resistant Torx Bit Sockets: T7, T8, T10, T15, T20, T25, T27, T30 (1 1/2" O'all Lg.)
    3/8" External Torx Standard Sockets: E10, E12, E14, E16 (1 1/8" O'all Lg.)
    3/8" Tamper-Resistant Torx Bit Sockets: T40, T45, T50, T55 (1 7/8" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets), Black-Oxide Steel (Standard Sockets)Plastic CaseHex, Tamper-Resistant Torx, Torx, External Torx93111A110000000
     

    Torque Screwdriver and Bit Sets

    Image of Product. Front orientation. Torque Screwdrivers. Torque Screwdriver and Bit Sets .
    Image of Attribute. Front orientation. Torque Screwdriver and Bit Sets .

    These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that states the product has passed a test for accuracy.
    Note: Accuracy ratings do not apply to the lower 20% of the torque range.
    Material
    No. of
    Pieces
    Components Included
    Adapters Included
    Extensions Included
    Drive Tools Included
    Torque Range
    Graduations
    For Bit Hex
    Shank Size
    Torque-Limiting
    Direction
    Clockwise
    Accuracy
    Overall
    Lg.
    Shaft
    Handle
    Certificate Type
    Each
    Slip-Release Torque Limiter
     
    in·lbf, N-m
    291 Adapter
    1 Drive Tool
    1 Extension
    26 Bits    		1/4" Square Drive Socket AdapterScrewdriver Bit ExtensionTorque-Limiting Screwdriver2 in·lbf to 36 in·lbf
    0.2 N-m to 4 N-m    		2 in·lbf
    0.2 N-m    		1/4"Clockwise±6%7 3/4"AluminumAluminum
    		Calibration Certificate Traceable to NIST5716A520000000
     

    Bit Screwdrivers

    Image of Product. Front orientation. Contains Inset. Screwdrivers. Bit Screwdrivers, Bit Screwdrivers with Bit Storage in Handle.
    Image of Product. Front orientation. Screwdrivers. Bit Screwdrivers, Bit Screwdrivers with Bit Storage in Pouch.

    Bit Screwdrivers with Bit

    Storage in Handle

    Bit Screwdrivers with Bit

    Storage in Pouch

    Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Bit Screwdrivers with Bit Storage in Handle
     
    Premium
    26Torq-Set®: No. 6, No. 8, No. 10
    Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 5 mm
    Tamper-Resistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40
    Drilled Spanner: No. 4, No. 6, No. 8, No. 10    		1/4"Standard8 1/2"3 3/8"5/16"Stainless SteelMagnetKlein Tools7262A49000000
     
    Bit Screwdrivers with Bit Storage in Pouch
     
    Premium
    32Phillips: No. 1, No. 2, No. 3
    Slotted: 3/64"
    Torq-Set®: No. 6, No. 8, No. 10
    Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T30, T40, T27
    Pozidriv®: No. 1, No. 2; No. 3
    Drilled Spanner: No. 4, No. 6, No. 8, No. 10
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4    		1/4"Standard5 1/2"13/16"7/16"Nickel-Plated SteelQuick-Change ChuckWera7262A63000000
     

    Bit Sets For Impact Drivers

    Image of Product. Front orientation. Screwdriver Bits. Bit Sets For Impact Drivers.
    Tougher than your average bits, the ones in these sets have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.
    Hex Shank—Use a bit adapter (not included) to attach these bits to power tools.
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    301 Adapter
    29 Bits    		Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—3 ea.
    Phillips: No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 2 (1" O'all Lg.)—3 ea.
    Torx: T10, T15 (1" O'all Lg.)—1 ea.
    Torx: T20, T30, T40 (1" O'all Lg.)—2 ea.
    Torx: T25 (1" O'all Lg.)—3 ea.    		1/4" Female Hex × 1/4" Male Hex for Power ToolsDiamond-Coated SteelPlastic Case2779N110000000
     

    Adjustable-Length Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Adjustable-Length Screwdriver Sets.
    Slide the shaft in or out of the handle to get the exact length you need. These sets can tackle the same variety of jobs as standard screwdriver sets, but they’re less bulky. Press down on the collar to adjust the length or swap shafts. The shafts are also reversible, so you can flip them around for a different size.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Screwdrivers
    Replacement
    Handles
    No. of
    Sizes
    Sizes Included
    Relative
    Lg.
    Overall Lg.
    Material
    Mfr.
    Each
    Each
    Screwdrivers in Canvas Roll-Up Pouch
     
    Premium
    28Phillips: No. 1, No. 2
    Slotted: 9/64", 3/16", 7/32", 17/64"
    Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40    		Standard6 1/4" to 9 1/4"Chrome-Plated SteelWiha2257A600000002257A43000000
    48Phillips: No. 0, No. 1, No. 2
    Slotted: 1/8", 9/64", ¹¹⁄₆₄", 3/16", 7/32", ¼", ¹⁷⁄₆₄"
    Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40
    Square: No. 1, No. 2
    Nutdriver: ¼", ⁹⁄₃₂", ⁵⁄₁₆", ¹¹⁄₃₂", ⅜", ⁷⁄₁₆", ½"
    Nutdriver: 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm    		Standard6 1/4" to 9 1/4"Chrome-Plated SteelWiha2257A420000002257A4300000
     
    Screwdriver and Nutdriver Shafts
    Replace a worn shaft or add sizes and drive styles to your set.
    Drive Size
    Overall
    Lg.
    Material
    Each
    Hex
    3/32" × 7/64"6"Chrome-Plated Steel2257A3400000
    1/8" × 9/64"6"Chrome-Plated Steel2257A350000
    5/32" × 3/16"6"Chrome-Plated Steel2257A330000
    2 mm × 2.5 mm6"Chrome-Plated Steel2257A270000
    3 mm × 4 mm6"Chrome-Plated Steel2257A290000
    5 mm × 6 mm6"Chrome-Plated Steel2257A320000
     
    Slotted and Phillips
    1/8" × No. 06"Chrome-Plated Steel2257A2500000
    5/32" × No. 16"Chrome-Plated Steel2257A2200000
    1/4" × No. 26"Chrome-Plated Steel2257A2100000
     
    Square
    No. 1 × No. 26"Chrome-Plated Steel2257A3600000
     
    Tamper-Resistant Torx
    T6 × T86"Chrome-Plated Steel2257A2600000
    T7 × T96"Chrome-Plated Steel2257A2800000
    T10 × T156"Chrome-Plated Steel2257A2300000
    T20 × T256"Chrome-Plated Steel2257A2400000
    T30 × T406"Chrome-Plated Steel2257A3100000
     
    External Hex
    3/16"6"Chrome-Plated Steel2257A440000
    1/4"6"Chrome-Plated Steel2257A450000
    9/32"6"Chrome-Plated Steel2257A460000
    5/16"6"Chrome-Plated Steel2257A470000
    11/32"6"Chrome-Plated Steel2257A480000
    3/8"6"Chrome-Plated Steel2257A490000
    7/16"6"Chrome-Plated Steel2257A510000
    1/2"6"Chrome-Plated Steel2257A520000
    5 mm6"Chrome-Plated Steel2257A530000
    5.5 mm6"Chrome-Plated Steel2257A540000
    6 mm6"Chrome-Plated Steel2257A550000
    7 mm6"Chrome-Plated Steel2257A560000
    8 mm6"Chrome-Plated Steel2257A570000
    9 mm6"Chrome-Plated Steel2257A580000
    10 mm6"Chrome-Plated Steel2257A590000
    11 mm6"Chrome-Plated Steel2257A610000
     

    High-Leverage T-Handle Key Sets

    Image of Product. Front orientation. T-Handle Keys. High-Leverage T-Handle Key Sets.
    With two driving ends, these T-handle keys offer both extended reach and enhanced leverage. Drive with the short shaft and crank with the long to loosen stubborn screws. Alternatively, flip these keys around and drive with the long shaft to reach screws tucked deep in machinery. These sets include the most popular drive sizes, so you always have the right tool on hand.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Each
    Torx
     
    Chrome-Plated Steel
    7T10 Torx T-Handle Key (4 15/16" O'all Lg.)
    T15 Torx T-Handle Key (4 15/16" O'all Lg.)
    T20 Torx T-Handle Key (5 1/8" O'all Lg.)
    T25 Torx T-Handle Key (7 1/8" O'all Lg.)
    T27 Torx T-Handle Key (7 1/8" O'all Lg.)
    T30 Torx T-Handle Key (7 1/8" O'all Lg.)
    T40 Torx T-Handle Key (7 1/8" O'all Lg.)    		Ultra Grip6186A72000000
     

    Angled-Drive Ball-Tip L-Key Sets

    Image of ProductInUse. Front orientation. Contains Annotated. Angled-Drive Ball-Tip L-Key Sets.
    Image of Product. Plastic Caddy. Front orientation. L-Keys. Angled-Drive Ball-Tip L-Key Sets, Single Ball, Plastic Caddy.

    Plastic

    Caddy

    Reach corners and tight spaces with the sizes you use most. These L-keys turn screws at an angle when you can’t access them head on. They have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Ball
    No. of
    Pieces
    Drive Size
    Relative
    Lg.
    Location
    Shape
    Max. Access
    Angle
    Finish
    Container
    Type
    Each
    Alloy Steel
     
    Torx
    8T9, T10, T15, T20, T25, T27, T30, T40LongSingle BallRound20°Black Phosphate CoatedPlastic Caddy54575A44000000
     
    Tamper-Resistant Torx
    8T8, T10, T15, T20, T25, T27, T30, T40LongSingle BallRound25°Nickel PlatedPlastic Caddy5358N1100000
     

    T-Handle Key Sets

    Image of Product. Front orientation. T-Handle Keys. T-Handle Key Sets.
    Keep a selection of top-quality T-handle keys on hand, so you always have the size you need. They're perfect for cranking screws in large machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. Made of hardened steel, they'll last a lifetime in your tool kit.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.
    No. of
    Pieces
    Includes
    Grip
    Style
    Relative Lg.
    Container
    Type
    Each
    Torx
     
    Chrome-Plated Steel
    7T10 Torx T-Handle Key (4 15/16" O'all Lg.)
    T15 Torx T-Handle Key (4 15/16" O'all Lg.)
    T20 Torx T-Handle Key (5 1/4" O'all Lg.)
    T25 Torx T-Handle Key (5 1/4" O'all Lg.)
    T30 Torx T-Handle Key (5 1/4" O'all Lg.)
    T40 Torx T-Handle Key (9 1/4" O'all Lg.)
    T50 Torx T-Handle Key (11 1/2" O'all Lg.)    		CushionStandard, LongMetal Stand6963A71000000
     

    High-Leverage T-Handle Keys

    Image of Product. Front orientation. T-Handle Keys. High-Leverage T-Handle Keys, Ultra Grip.

    Ultra Grip

    With two driving ends, these T-handle keys offer both extended reach and enhanced leverage. Drive with the short shaft and crank with the long to loosen stubborn screws. Alternatively, flip the key around and drive with the long shaft to reach screws tucked deep in machinery.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.
    Length
    Drive
    Size
    Long
    Shaft
    Short
    Shaft
    Overall
    Grip
    Style
    Each
    Torx
     
    Chrome-Plated Steel
    T406"5/8"7 1/8"Ultra Grip6186A67000000
     

    Precise-Control Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Precise-Control Bit Screwdrivers.
    Make fine adjustments to a wide range of screws in electronics, miniature models, and more. These screwdrivers give you more control than standard screwdrivers, so you can avoid stripping tiny screws or cracking delicate materials. They’re also known as miniature screwdrivers. Press your palm against the end of the handle as you rotate the shaft with your fingertips.
    All components come in a carrying case with a magnetic locking lid. The underside of the lid has a raised grid pattern, so you can use it to organize your screws while you work.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Shaft
    No. of
    Sizes
    Sizes Included
    Components Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Bit Screwdrivers with Bit Storage in Case
     
    Premium
    102Phillips: No. 000, No. 00, No. 0
    Phillips: No. 1, No. 2, No. 3
    Slotted: 0.039", 0.059", 0.079", 0.098", 0.118", 0.138"
    Slotted: 0.157", 0.197", 0.236", 0.276", 0.315"
    Hex: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm
    Torx: T2, T3, T4, T5
    Torq-Set®: No. 6, No. 8, No. 10
    Tamper-Resistant Hex: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
    Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 3.5 mm
    Tamper-Resistant Hex: 4 mm, 5 mm, 6 mm, 7 mm, 8mm
    Tamper-Resistant Torx: T6, T7, T8
    Tamper-Resistant Torx: T9, T10, T15, T20, T25, T27, T30, T35, T40
    Pentalobe: PL2, PL5, PL6
    JIS: No. 000, No. 00, No. 0, No. 1
    Y-Type: No. 000, No. 00, No. 0, No. 1
    Square: No. 0, No. 1, No. 2, No. 3
    Pozidriv®: No. 0, No. 1, No. 2, No. 3
    Gamebit: 3.8 mm, 4.5 mm
    Drilled Spanner: No. 4, No. 6
    Drilled Spanner: No. 8, No. 10, No. 12
    Triple Square: M5, M6, M8
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4
    Triangle: 2 mm, 2.2 mm, 2.6 mm, 3 mm
    Clutch: No. 1, No. 2, No. 3
    Nutdriver: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm    		Bit Screwdriver for 4 mm Bits
    Bit Screwdriver for 1/4" Bits
    1/4" × 4 mm Hex Shank Adapter
    1/4" Hex Shank × 1/4" Square Drive Adapter
    1/4" Driver × 3/8" Square Drive Adapter
    1/4" Square Drive × 1/4" Hex Shank Adapter
    iPhone Standoff Bit
    Oval Drive Bit
    SIM Card Ejector Bit
    Magnetic Retriever Bit
    Schrader Valve Core Bit
    Eyebolt and Hook Drive Bit    		1/4", 4 mmStandard4 1/2"13/16"1/4"AluminumMagnetiFixIt9749N12000000
     

    Quick-Change Fold-Up L-Key Sets

    Image of Product. Front orientation. L-Keys. Quick-Change Fold-Up L-Key Sets.
    These L-keys unfold from the top and bottom of the handle, so you can quickly select the one you need without unstacking the others. The handle gives you leverage to tighten with minimal effort.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Handle
    No. of
    Sizes
    Drive Size
    Max. Fold-Out
    Angle
    Material
    Lg.
    Material
    Color
    Each
    Plain Grip
     
    Torx
    8T9, T10, T15, T20, T25, T27, T30, T40270°Black Phosphate-Coated Alloy Steel4 5/8"PlasticGreen9414N12000000
     

    Screw-Holding L-Key Sets

    Image of ProductInUse. Shown in Use. Front orientation. L-Keys. Screw-Holding L-Key Sets.
    Image of Product. Front orientation. L-Keys. Screw-Holding L-Key Sets.

    Shown in Use

    Use the sizes you reach for most to place and start screws in tight spots, or remove fasteners without dropping them. A retaining ring or ball detent on the tip grips screws securely, so the screw won’t fall off as you tighten or loosen. These L-keys are useful when working above crevices that a screw could slip into.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    No. of
    Pieces
    Drive Size
    Relative
    Lg.
    Finish
    Screw-Holding
    Mechanism
    Container
    Type
    Each
    Alloy Steel
     
    Torx
    8T9, T10, T15, T20, T25, T27, T30, T40LongBlack Phosphate CoatedBall DetentPlastic Caddy7904A27000000
     

    T-Handle Keys

    Image of Product. Front orientation. T-Handle Keys. T-Handle Keys, Cushion Grip.

    Cushion Grip

    Crank screws in large, heavy duty machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. They're made of hardened steel or stainless steel to last a lifetime in your tool kit.
    Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than other finishes and is less likely to wear off. These T-handle keys have the brightest, shiniest finish we offer to stand out in your tool box.
    Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.
    Long
    Drive
    Size
    Grip
    Style
    Overall
    Lg.
    Each
    Torx
     
    Chrome-Plated Steel
    T40Cushion9 1/4"6963A25000000
     

    T-Handle Ratcheting Bit Screwdrivers

    Image of Product. Bit Screwdrivers. Front orientation. Screwdrivers. T-Handle Ratcheting Bit Screwdrivers.
    Image of Product. Bit Screwdrivers with Bit Storage in Pouch. Front orientation. Screwdrivers. T-Handle Ratcheting Bit Screwdrivers, Bit Screwdrivers with Bit Storage in Pouch.

    Bit Screwdrivers

    Bit Screwdrivers with Bit Storage

    in Pouch

    Ease hand strain with smooth, steady motion and a natural grip as you turn a variety of screws. These screwdrivers have a wide T-shaped handle that keeps your wrist in a comfortable, neutral position and lets you lean into the driver. A built-in ratchet eliminates the need to reposition your grip with every turn. Twist a collar on the handle or flip the lever to change the ratcheting direction.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Bit Screwdrivers with Bit Storage in Pouch
     
    Premium
    16Phillips: No. 2, No. 3
    Slotted: 7/32"
    Hex: 1/8", 5/32", 3/16", 7/32", 1/4"
    Torx: T10, T15, T20, T25, T30, T40
    Square: No. 2, No. 3    		1/4"Standard5 3/4"1 3/4"3/8"Nickel-Plated SteelQuick-Change ChuckWera9863N220000000
     

    Tight-Clearance Pivoting L-Key Sets

    Image of Product. Front orientation. L-Keys. Tight-Clearance Pivoting L-Key Sets.
    Fasten in cramped, obstructed spaces without ever lifting the tool off the fastener. These L-keys have a pivot joint that lets you swing the handle to work around obstacles. Because the tip never loses contact with your screw, you don’t have to reposition after each turn.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    No. of
    Pieces
    Drive Size
    Relative
    Lg.
    Finish
    Container
    Type
    Each
    Alloy Steel
     
    Torx
    5T20, T25, T30, T40, T45LongChrome PlatedPlastic Caddy9765N13000000
     

    Angled-Drive Ball-Tip L-Keys

    Image of ProductInUse. Front orientation. Contains Annotated. Angled-Drive Ball-Tip L-Keys.
    Image of Product. Front orientation. L-Keys. Angled-Drive Ball-Tip L-Keys.
    Turn screws at an angle when you can’t access them head on. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Length
    Ball
    Each
    Package
    Drive
    Size
    Overall
    Relative
    Long
    Leg
    Short
    Leg
    Location
    Shape
    Finish
    Max. Access
    Angle
    Each
    Pkg.
    Qty.
    Pkg.
    Alloy Steel
     
    Torx
    T405 3/16"Long4 15/16"1 1/8"Single BallRoundBlack Phosphate Coated20°54575A3800000554575A308000000
     

    Wall-Mount L-Key Sets

    Image of Product. Front orientation. L-Keys. Wall-Mount L-Key Sets.
    Mount these rugged metal cases at your workstation so your L-keys are always in reach. When closed, they keep your tools protected; when open, they provide full access to your set without taking up extra space. These L-keys are precision manufactured to tight tolerances.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Mounting Hole
    No. of
    Pieces
    Drive Size
    Relative
    Lg.
    Finish
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Container Type
    Each
    Alloy Steel
     
    Torx
    14T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55ShortBlack OxideNo23/8"3"Metal Wall-Mount Case6959A84000000
    14T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55LongBlack OxideNo23/8"3"Metal Wall-Mount Case6959A8500000
     

    Fold-Up L-Key Sets

    Image of Product. Front orientation. L-Keys. Fold-Up L-Key Sets, Plain Grip.
    Image of Product. Front orientation. L-Keys. Fold-Up L-Key Sets, Ultra Grip.

    Plain Grip

    Ultra Grip

    Multiple L-keys fold up in the handle for easy carrying, similar to a Swiss army knife. Slip these sets in your pocket and never worry about misplacing individual keys. The handle gives you leverage to tighten with minimal effort.
    Ultra Grip— The textured handle adds cushioning and is easy to grip with wet or oily hands.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Handle
    No. of
    Sizes
    Drive Size
    Max. Fold-Out
    Angle
    Material
    Lg.
    Material
    Color
    Each
    Plain Grip
     
    Torx
    7T10, T15, T20, T25, T27, T30, T40180°Black-Oxide Alloy Steel4 1/4"SteelSilver8372A61000000
     
    Ultra Grip
     
    Torx
    8T8, T10, T15, T20, T25, T27, T30, T40180°Black-Oxide Alloy Steel4 1/4"PlasticGreen5842A4300000
     
    Tamper-Resistant Torx
    7T10, T15, T20, T25, T27, T30, T40180°Black-Oxide Alloy Steel4 1/4"PlasticGreen55515A2200000
     

    L-Keys Sets

    Image of Product. Front orientation. L-Keys. L-Keys Sets, Plastic Caddy.
    Image of Product. With Plastic Pouch. Front orientation. L-Keys. L-Keys Sets, Plastic Pouch.

    Plastic

    Caddy

    With

    Plastic

    Pouch

    Keep the most common L-key sizes in one portable set so the right size is always ready. These L-keys are precision manufactured to tight tolerances for an exact fit.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.
    No. of
    Pieces
    Drive Size
    Relative
    Lg.
    Finish
    Container
    Type
    Each
    Alloy Steel
     
    Torx
    7T10, T15, T20, T25, T27, T30, T40ShortBlack OxidePlastic Caddy6959A54000000
    7T10, T15, T20, T25, T27, T30, T40ShortZinc PlatedPlastic Caddy9391N12100000
    7T10, T15, T20, T25, T27, T30, T40LongBlack OxidePlastic Caddy6959A5800000
    7T10, T15, T20, T25, T27, T30, T40LongZinc PlatedPlastic Caddy9391N12200000
    7T10, T15, T20, T25, T27, T30, T40Extra LongBlack OxidePlastic Caddy9391N12300000
    8T9, T10, T15, T20, T25, T27, T30, T40LongGold PaintedPlastic Caddy6370A200000
    14T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55ShortBlack OxidePlastic Pouch6959A6200000
    14T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55LongBlack OxidePlastic Pouch6959A6300000
     

    L-Keys

    Image of Product. Front orientation. L-Keys. L-Keys.
    The highest quality L-keys you can buy for tightening and loosening screws. Our L-keys are precision manufactured to tight tolerances for an exact fit.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.
    Length
    Each
    Package
    Drive
    Size
    Overall
    Relative
    Long
    Leg
    Short
    Leg
    Finish
    Each
    Pkg.
    Qty.
    Pkg.
    Alloy Steel
     
    Torx
    T404 1/8"Short3 7/8"1 1/8"Black Phosphate Coated6959A3200000256959A321000000
    T405 3/16"Long4 15/16"1 1/16"Black Oxide6959A760000506959A761000000
     
    Tamper-Resistant Torx
    T403 7/16"Short3 1/8"1"Black Oxide55525A3200001055525A32100000
    T405 1/8"Long5"1 1/16"Black Phosphate Coated55525A10700002555525A133000000
    T406 3/4"Extra Long6 1/2"1"Black Oxide55525A115000002555525A125000000
     
    back to top