Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Make your surface magnetic with this paint.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

This water-based paint will not harm grass or other plant life.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

These two-part epoxy coatings resist chemicals and other solvents. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

Prepare foam pipe insulation for use outdoors. These coatings provide a clean, moisture-resistant finish that protects insulation from UV and ozone damage.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Press these putty-like fillers into cracks in wood up to 1/8" wide.