About Vacuum Pumps
More
Hand-Held High-Vacuum Gauges
Check the vacuum levels in high-vacuum pumps, valves, and chambers with this compact gauge. Use a ring and clamp (both sold separately) to connect them to another quick-clamp high-vacuum fitting, also known as KF, QF, and NW fittings. The digital display shows measurements in torr, mbar (millibar) and hPa (hectopascal).
- For Use With: Air
- Accuracy: ±10% @ 1.5 × 10 -4 to 7.5 torr, ±30% @ 22.5 to 75 torr
Vacuum Range | ||
|---|---|---|
| Torr | mbar | hPa |
| 3.7 × 10 -4 to 750 | 5 × 10 -4 to 1000 | 5 × 10 -4 to 1000 |
Gauges with Center Back Connection | Clamps | Rings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| High-Vacuum Flange Size | Wd. | Ht. | Dp. | Environment Temp. Range, °F | Process Temp. Range, °F | For Tube OD | Flange OD | Number of Batteries Included | Each | Each | Each | |||
Quick Clamp Tube Connection | ||||||||||||||
| 16 | 2 3/8" | 4 3/4" | 1" | 40° to 100° | 0° to 140° F | 3/4" | 1.18" | 1 | 000000 | 000000000 | 00000000 | 00000 | 00000000 | 00000 |
Oil-Free Electric High-Vacuum Pumps
Connect these pumps to a vacuum chamber to create high levels of vacuum—just plug them in and they’re ready to go. Since they don’t use oil, they won’t introduce contaminants into your system. They barely vibrate, which prevents interference with sensitive instruments and measurement devices. These pumps are small enough to fit on a workbench or table. They include both a diaphragm pump and a turbomolecular pump. The turbomolecular pump meets IP54 for protection in damp and dusty environments.
Pumps with claw-clamp intake connections (ISO-K) are rated for high-vacuum chambers. You’ll need a ring and four double-claw clamps (all sold separately) to connect them to other components. They include a gauge with quick-clamp (KF) connections, so you’ll also need a quick clamp and a ring (both sold separately) to connect it to your chamber.
Pumps with flanged intake connections (CF) are rated for ultra-high-vacuum chambers. You’ll need two gaskets (sold separately) to connect to your chamber: one for the intake and one for the included gauge.
Intake Connection | Gauge Port Connection | Discharge Connection (BSPP Threads) | O'all | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Vacuum | Max. Flow Rate, cfm | Volume, dBA  | Current, A | For Tube OD | Flange OD | High-Vacuum Flange Size | High Vacuum Connection Type | For Tube OD | Flange OD | High-Vacuum Flange Size | High Vacuum Connection Type | Pipe Size | Gender | Ht. | Wd. | Each | |
Claw-Clamp Intake Connection—High Vacuum Rating | |||||||||||||||||
120V AC/240V AC, Single Phase | |||||||||||||||||
| 10 -8 torr @ 72° F | 142 | 50 | 4.6 | 2 1/2" | 3 3/4" | 63 | ISO-K | 1" | 1.57" | 25 | ISO-KF | 1/8 | Male | 13 5/8" | 11 7/8" | 000000 | 000000000 |
Flanged Intake Connection—Ultra-High Vacuum Rating | |||||||||||||||||
120V AC/240V AC, Single Phase | |||||||||||||||||
| 10 -12 torr @ 72° F | 142 | 50 | 4.6 | 2 1/2" | 4 1/2" | 63 | CF | 1 1/2" | 2 3/4" | 40 | CF | 1/8 | Male | 13 7/8" | 11 7/8" | 000000 | 00000000 |
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | Material | Max. Vacuum | Each | |
For Claw-Clamp Intake Connection—Double-Claw with Bolt | |||||||
|---|---|---|---|---|---|---|---|
| 2 1/2", 3", 4" | 3.74", 4.33", 5.12" | 63, 80, 100 | ISO-K | Aluminum | 10 -8 torr @ 72° F | 0000000 | 00000 |
For Quick-Clamp Gauge Connection—Clamp with Wing Nut | |||||||
| 1" | 1.57" | 25 | ISO-KF | Aluminum | 10 -8 torr @ 72° F | 0000000 | 00000 |
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | O-Ring | Inner Ring | Max. Vacuum | Max. Temp., °F | Each | |
For Claw-Clamp Intake Connection | |||||||||
| 2 1/2" | 3.74" | 63 | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 10 -8 torr @ 72° F | 400° | 0000000 | 000000 |
For Quick-Clamp Gauge Connection | |||||||||
| 1" | 1.57" | 25 | ISO-KF | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 10 -8 torr @ 72° F | 300° | 0000000 | 00000 |
