Filter by
System of Measurement
Thread Size
Overall Height
Fabrication
Finish
Movement
Torque
Body Style
Material
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Certification
Threading
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Specifications Met
Height
Installation Torque
Hoist Rings—For Lifting
 |
 |
180° Pivot |
 |
360° Swivel |
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
CE Marked—Hoist rings that are CE marked meet European safety standards.
Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vert. Cap., lb. | Movement | Specs. Met | Certification | Mil. Spec. | 1-9 | 10-Up | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Machined Black-Oxide Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 1/2"-4 | 4" | 6" | 20 7/8" | 50,000 | 180° Pivot and 360° Swivel | ASME B30.26 | CE Marked, Mil. Spec. | MIL-STD-1365, MIL-STD-209 | 3052T75 | 000000000 | 000000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Eyebolts—For Lifting
Steel
 |  |
With Shoulder | Without Shoulder |
With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
Without Shoulder—For vertical lifting only.
Zinc-Plated Steel
 |  |
With Shoulder | Without Sholder |
Zinc-plated steel eyebolts offer good corrosion resistance.
With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
Without Shoulder—For vertical lifting only.
