McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    High Visibility—High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    Nickel-Plated Steel—Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread
    Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Forged Black-Oxide Steel
    M14 × 2 mm25501613,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-209000000000000000000000
    M14 × 2 mm25502003,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-2090000000000000000000
    M14 × 2 mm32501683,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-2090000000000000000000
    M14 × 2 mm32502073,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-2090000000000000000000
     
    Forged Fluorescent Green Powder-Coated Steel—High Visibility
    M14 × 2 mm2550.8160.23,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-2090000000000000000000
     
    Forged Nickel-Plated Steel
    M14 × 2 mm25501613,300180° Pivot and 360° SwivelASME B30.26CE Marked
    		MIL-STD-1365, MIL-STD-2090000000000000000000
     

    Nonswiveling Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Nonswiveling Hoist Rings—For Lifting, D-Shape.

    D-Shape

    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Nonswiveling Hoist Rings—For Lifting, Nonswiveling.

    180° Pivot

    The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    D-Shape—D-shape hoist rings have a wider end than triangle hoists, so it’s easier to attach webbing and large hooks.
    No. of Mounting
    Holes
    Thread
    Size
    Thread
    Lg., mm
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Fasteners
    Included
    Certification
    Each
    D-Shape
     
    Forged Yellow Powder-Coated Steel
    2M14 × 2 mm251 7/8"4 3/4"1,760180° Pivot
    		YesCE Marked
    		00000000000000
     

    Eyebolts—For Lifting

    Also known as machinery eyebolts.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M14 × 2 mm2828333,500Fully Threaded1040000000000000
     
    Galvanized Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.

    Closed Eye

    With Shoulder

    Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M14 × 2 mm4545353,500Fully Threaded1210000000000000
     

    Rotating Eyebolts—For Lifting

    Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
    Warning: Never use to lift people or items over people.
    Powder-Coated Steel
    Image of Product. Front orientation. Eyebolts. Rotating Eyebolts—For Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Rotating Eyebolts—For Lifting.
    Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Color
    Overall
    Lg., mm
    Each
    Closed Eye
    M14 × 2 mm1818301,650Fully ThreadedPink73000000000000000
     

    Nylon-Coated Eyebolts—For Lifting

    Route wire and cable through the smooth eye without snagging.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Nylon-Coated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, With Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Temp. Range,
    ° F
    Overall
    Lg., mm
    Each
    Closed Eye
    M14 × 2 mm2828353,500Fully Threaded30 to 2751030000000000000
     
    back to top