M30 Hoist Rings | McMaster-Carr

Filter by

System of Measurement

Thread Length

Movement

Vertical Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

Inside Width

Thread Pitch

Finish

Body Style

Material

Overall Height

Safety Factor

Shank Length

Length

Installation Torque

REACH

RoHS

Compliant with Exemptions

Specifications Met

Eye Diameter

Fabrication

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Height

Torque

100 ft·lbf to 249 ft·lbf

250 ft·lbf to 499 ft·lbf

Threading

Eye Shape

22 Products

Hoist Rings—For Lifting

180° Pivot

360° Swivel

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.

Warning: Never use to lift people or items over people.

High Visibility—High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.

Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.

Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.

Nickel-Plated Steel—Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.

CE Marked—Hoist rings that are CE marked meet European safety standards.

										Each
Thread Size	Thread Lg., mm	Inside Wd., mm	Overall Ht., mm	Vert. Cap., lb.	Movement	Specs. Met	Certification	Mil. Spec.		1-9	10-Up







			Forged Black-Oxide Steel

			M30 × 3.5 mm	38	71	226	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	0000000	0000000


			M30 × 3.5 mm	38	71	267	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000
			M30 × 3.5 mm	48	71	236	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	0000000	000000	000000
			M30 × 3.5 mm	48	71	277	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000
			M30 × 3.5 mm	67	101	302	15,425	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	0000000	000000	000000




					Machined Black-Oxide Steel

					M30 × 3.5 mm	46	89	268	15,425	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000


					M30 × 3.5 mm	54	71	220	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000
					M30 × 3.5 mm	54	71	261	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000
					M30 × 3.5 mm	66	89	288	15,425	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	00000000	000000	000000




							Forged Fluorescent Green Powder-Coated Steel—High Visibility

							M30 × 3.5 mm	38	76.2	225.2	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	0000000	000000	000000




									Forged Nickel-Plated Steel

									M30 × 3.5 mm	38	71	226	9,900	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	MIL-STD-1365, MIL-STD-209	0000000	000000	000000

Hoist Ring Assortments—For Lifting


Hoist Ring Assembly (Retaining Ring Not Pictured)


180° Pivot	360° Swivel

Keep on hand all the parts needed to assemble custom hoist rings. Ideal for angular lifting, these hoist rings will withstand stresses that bend or break eyebolts. The base of these hoist rings will swivel 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. The shackle will pivot 180° front to back. All parts have a black oxide finish for mild corrosion resistance.

Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.

Warning: Never use to lift people or items over people.

Includes	Specs. Met		Each







Forged Black-Oxide Steel

104	M12 M16 M20 M24 M30	180° Pivot and 360° Swivel	Four 3/4" Dia. Shackles Four 1" Dia. Shackles Four M12 × 1.75 mm Bolts for 3/4" Dia. Shackle—2,310 lbs. Capacity and 19 mm Thread Lg. Four M16 × 2 mm Bolts for 3/4" Dia. Shackle—4,180 lbs. Capacity and 29 mm Thread Lg. Four M20 × 2.5 mm Bolts for 3/4" Dia. Shackle—4,730 lbs. Capacity and 34 mm Thread Lg. Four M20 × 2.5 mm Bolts for 1" Dia. Shackle—6,610 lbs. Capacity and 32 mm Thread Lg. Four M24 × 3 mm Bolts for 1" Dia. Shackle—9,250 lbs. Capacity and 37 mm Thread Lg. Four M30 × 3.5 mm Bolts for 1" Dia. Shackle—9,250 lbs. Capacity and 38 mm Thread Lg. 24 Bushings 24 Retaining Rings 24 Washers	ASME B30.26	0000000	000000000

Swivel-Under-Load Hoist Rings—For Lifting


	180° Pivot	360° Swivel

The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.

Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.

Warning: Never use to lift people or items over people.

Overall Ht., mm	Vert. Cap., lb.	Movement	Specs. Met	Certification		Each







Forged Yellow Powder-Coated Steel

M30 × 3.5 mm	45	54	269	21,160	180° Pivot and 360° Swivel	ASME B30.26	CE Marked	0000000	0000000

Eye Nuts—For Lifting


Style A	Style C

Create your own lifting eye by adding an eye nut to a stud or bolt.

Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.

Warning: Never use to lift people or items over people.

Fully Threaded


Style A	Style C

Zinc-Plated Steel—Zinc-plated steel eye nuts offer good corrosion resistance.

	Eye Dia., mm	Vert. Cap., lb.	Specs. Met		Each
Steel







	Closed Eye Nuts

	A	M30 × 3.5 mm	139	50	14,000	—	0000000	0000000


	Zinc-Plated Steel







					Closed Eye Nuts

					C	M30 × 3.5 mm	109	60	7,050	DIN 582	0000000	00000

Eyebolts—For Lifting

Also known as machinery eyebolts.

Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.

Warning: Never use to lift people or items over people.

Steel

Closed Eye

With Shoulder

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread						With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Threading	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	60	60	55	14,075	Fully Threaded	192	0000000	000000

Zinc-Plated Steel

Closed Eye

With Shoulder

Zinc-plated steel eyebolts offer good corrosion resistance.

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread							With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Specs. Met	Threading	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	45	45	60	7,050	DIN 580	Fully Threaded	154	0000000	000000

Galvanized Steel

Closed Eye

With Shoulder

Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread						With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Threading	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	76	76	55	14,075	Fully Threaded	210	0000000	000000

304 Stainless Steel

Closed Eye

With Shoulder

304 stainless steel eyebolts are more corrosion resistant than galvanized steel.

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread							With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Specs. Met	Threading	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	45	45	60	7,050	DIN 580	Fully Threaded	154	0000000	0000000

316 Stainless Steel

Closed Eye

With Shoulder

316 stainless steel eyebolts are the most corrosion resistant.

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread							With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Specs. Met	Threading	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	45	45	60	7,050	DIN 580	Fully Threaded	154	0000000	0000000

Rotating Eyebolts—For Lifting

Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.

Warning: Never use to lift people or items over people.

Powder-Coated Steel

Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread							With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Threading	Color	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	45	45	60	9,900	Fully Threaded	Pink	158	00000000	0000000

Nylon-Coated Eyebolts—For Lifting

Route wire and cable through the smooth eye without snagging.

Warning: Never use to lift people or items over people.

Nylon-Coated Steel

Closed Eye

With Shoulder

Closed Eye—Closed eyes are stronger than bent-closed eyes.

	Thread							With Shoulder
	Size	Lg., mm	Shank Lg., mm	Eye Dia., mm	Vert. Cap., lb.	Threading	Temp. Range, ° F	Overall Lg., mm		Each
Closed Eye



		M30 × 3.5 mm	60	60	55	14,075	Fully Threaded	30 to 275	194	0000000	000000