Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Make oblong holes in fabric, leather, and rubber. Also known as arch punches.

Sets include common ID and OD sizes to create gaskets and washers in two strikes.

Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.

Screw one of the interchangeable heads into the included handle to create holes up to 3/16" dia. in tight spaces.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.

Cut DIN-size holes in steel up to 7/64" thick using a driver ram and hydraulic pump.

The driver supplies eight tons of force to the hole punches in this set to make straight punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

The included hydraulic driver allows you to punch conduit up to size 2.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

These medium duty tools have more than double the punching force of compact portable lever-operated punches.

A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.

Roller bearings in the lever provide low-effort punching.

Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.

These saws have high-speed steel teeth.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

Specially designed teeth cut faster than the teeth on standard hole saws.

With two adjustable blades, these saws cut a variety of hole sizes in ceilings, walls, floors, and other surfaces made of drywall, plaster, plastic, and wood. To block flying chips and collect dust, they have a clear debris shield.

The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.

These high-speed steel saws cuts through aluminum, brass, bronze, and steel.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.

Attach these saws to your portable drill to cut a range of large diameter hole sizes in sheet metal.

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets.

These kits have saws with high-speed steel teeth and a steel body.

Fit these through existing holes and mark the center of the hole in a second workpiece.

Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.

These sets come with three punches for use with a variety of hole sizes. Insert one into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.

Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.

The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.

With an internal spring mechanism, these punches offer one-hand operation when marking hole centers.

Also known as center punches, the tools in these sets mark hole centers in metal and other materials.

Strike these Starrett punches with a hammer to mark hole centers in metal and other materials. Also known as center punches.

Ground to a sharper tip than other center-marking punches, these tools make the precision marks required for the intersection of lines and other detailed tasks. They're also known as prick punches.

Punch soft materials and scribe lines in metal and wood.

Punch a hole in your material to prepare for the installation of fabric grommets. Strike these tools with a mallet.

These punches set grommets that have a standard washer, tooth lock washer, or an extended-neck washer.

Minimize damage to your work surfaces with these brass punches, which are softer than steel punches.

The rounded tip of these punches fits into the open ends of hollow and spring pins to protect them from damage during removal.

Loosen pins and rivets before removal.

Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.

Made from aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.

These brass tools reduce marring on metal surfaces because they're softer than steel punches.

Sets include three punches in various point diameters to set nails flush or drive them out of view without damaging wood surfaces.

Contains pin-loosening, pin-removal, and center-marking punches.

These pins have a flat head to fit into a counterbored hole.

Use these pins with a die to punch 1/8" and larger holes. Pins can be modified to fit your application.

Mark keys with common messages such as "Do Not Copy" and "Master".

Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

These stamps have a border around the characters to help them stand out.

These stamps provide an entire number set in the convenience of one handheld stamp. Rotate the wheel to change the character.

Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

These stamps have a border around the characters to help them stand out.