For Hole Diameter For Hole Diameter |
|---|
Shape Shape |
|---|
 |  |
| Round | Gasket/Washer |
 | |
| Oblong |
For Use On For Use On |
|---|
|
|
Punching Action Punching Action |
|---|
 | Hammer Driven |
 | Hand Driven |
Individual/Set Individual/Set |
|---|
|
Length Length |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Container Type Container Type |
|---|
|
Hammer-Driven Hole Punches
Strengthened edges cut holes in soft metal. These punches are also known as arch punches.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Brass, Copper, Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 3/16" | 4 1/2" | Steel | 0000000 | 000000 |
| 1/4" | 4 1/2" | Steel | 0000000 | 00000 |
| 5/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 3/8" | 4 5/8" | Steel | 0000000 | 00000 |
| 7/16" | 4 3/4" | Steel | 0000000 | 00000 |
| 1/2" | 4 7/8" | Steel | 0000000 | 00000 |
| 9/16" | 4 7/8" | Steel | 0000000 | 00000 |
| 5/8" | 5" | Steel | 0000000 | 00000 |
| 11/16" | 5" | Steel | 0000000 | 00000 |
| 3/4" | 5 1/8" | Steel | 0000000 | 00000 |
| 13/16" | 5 1/8" | Steel | 0000000 | 00000 |
| 7/8" | 5 1/4" | Steel | 0000000 | 00000 |
| 15/16" | 5 1/4" | Steel | 0000000 | 00000 |
| 1" | 5 3/8" | Steel | 0000000 | 00000 |
| 1 1/16" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 1/8" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 3/16" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 1/4" | 5 3/4" | Steel | 0000000 | 00000 |
| 1 5/16" | 5 3/4" | Steel | 0000000 | 00000 |
| 1 3/8" | 5 7/8" | Steel | 0000000 | 00000 |
| 1 7/16" | 5 7/8" | Steel | 0000000 | 00000 |
| 1 1/2" | 6" | Steel | 0000000 | 00000 |
| 1 5/8" | 6 1/4" | Steel | 0000000 | 00000 |
| 1 3/4" | 6 3/8" | Steel | 0000000 | 000000 |
| 1 7/8" | 6 7/8" | Steel | 0000000 | 000000 |
| 2" | 7" | Steel | 0000000 | 000000 |
| 2 1/8" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 1/4" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 3/8" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 1/2" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 5/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 3/4" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 7/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 3" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 1/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 1/4" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 3/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 1/2" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 5/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 3/4" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 7/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 4" | 8 1/2" | Steel | 0000000 | 000000 |
| 2mm | 4 1/4" | Steel | 0000000 | 00000 |
| 3mm | 4 3/8" | Steel | 0000000 | 00000 |
| 4mm | 4 3/8" | Steel | 0000000 | 00000 |
| 5mm | 4 3/8" | Steel | 0000000 | 00000 |
| 6mm | 4 1/2" | Steel | 000000 | 00000 |
| 7mm | 4 1/2" | Steel | 000000 | 00000 |
| 8mm | 4 1/2" | Steel | 000000 | 00000 |
| 9mm | 4 3/4" | Steel | 000000 | 00000 |
| 10mm | 4 7/8" | Steel | 000000 | 00000 |
| 11mm | 4 7/8" | Steel | 0000000 | 00000 |
| 12mm | 4 7/8" | Steel | 0000000 | 00000 |
| 13mm | 5 1/2" | Steel | 0000000 | 00000 |
| 14mm | 5 1/2" | Steel | 0000000 | 00000 |
| 15mm | 5 1/2" | Steel | 0000000 | 00000 |
| 16mm | 5 1/2" | Steel | 0000000 | 00000 |
| 17mm | 5 1/2" | Steel | 0000000 | 00000 |
| 18mm | 5 1/2" | Steel | 0000000 | 00000 |
| 19mm | 5 1/2" | Steel | 0000000 | 00000 |
| 20mm | 5 1/2" | Steel | 000000 | 00000 |
| 21mm | 5 3/8" | Steel | 0000000 | 00000 |
| 22mm | 5 1/2" | Steel | 0000000 | 00000 |
| 23mm | 5 1/2" | Steel | 0000000 | 00000 |
| 24mm | 5 1/2" | Steel | 0000000 | 00000 |
| 25mm | 5 7/8" | Steel | 0000000 | 00000 |
| 26mm | 5 7/8" | Steel | 0000000 | 00000 |
| 27mm | 5 3/8" | Steel | 0000000 | 00000 |
| 28mm | 6" | Steel | 0000000 | 00000 |
| 29mm | 5 7/8" | Steel | 0000000 | 00000 |
| 30mm | 5 7/8" | Steel | 000000 | 00000 |
| 31mm | 5 3/4" | Steel | 0000000 | 00000 |
| 32mm | 6 1/8" | Steel | 0000000 | 00000 |
| 33mm | 6" | Steel | 0000000 | 00000 |
| 34mm | 6" | Steel | 0000000 | 00000 |
| 35mm | 6 1/2" | Steel | 0000000 | 00000 |
| 36mm | 6 3/8" | Steel | 0000000 | 000000 |
| 37mm | 6 3/8" | Steel | 0000000 | 000000 |
| 38mm | 6 5/8" | Steel | 0000000 | 000000 |
| 39mm | 6 5/8" | Steel | 0000000 | 000000 |
| 40mm | 6 1/2" | Steel | 000000 | 000000 |
| 41mm | 6 3/8" | Steel | 0000000 | 000000 |
| 42mm | 6 3/8" | Steel | 0000000 | 000000 |
| 43mm | 6 3/8" | Steel | 0000000 | 000000 |
| 44mm | 7 1/4" | Steel | 0000000 | 000000 |
| 45mm | 7 1/8" | Steel | 0000000 | 000000 |
| 46mm | 7 1/8" | Steel | 0000000 | 000000 |
| 47mm | 6 3/4" | Steel | 0000000 | 000000 |
| 48mm | 7" | Steel | 0000000 | 000000 |
| 49mm | 6 7/8" | Steel | 0000000 | 000000 |
| 50mm | 7 1/2" | Steel | 000000 | 000000 |
| 51mm | 7 1/2" | Steel | 0000000 | 000000 |
| 52mm | 7 1/2" | Steel | 0000000 | 000000 |
Hammer-Driven Small Hole Punches
Use these punches to make round holes in soft, nonmetallic materials.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 1/16" | 3 3/4" | Steel | 0000000 | 00000 |
| 5/64" | 3 3/4" | Steel | 0000000 | 0000 |
| 3/32" | 3 3/4" | Steel | 0000000 | 0000 |
| 1/8" | 3 3/4" | Steel | 0000000 | 0000 |
| 9/64" | 3 3/4" | Steel | 0000000 | 0000 |
| 5/32" | 3 3/4" | Steel | 0000000 | 0000 |
| 11/64" | 3 3/4" | Steel | 0000000 | 0000 |
| 3/16" | 3 3/4" | Steel | 0000000 | 0000 |
| 13/64" | 3 3/4" | Steel | 0000000 | 0000 |
| 7/32" | 3 3/4" | Steel | 0000000 | 0000 |
| 1/4" | 3 3/4" | Steel | 0000000 | 0000 |
| 17/64" | 4 1/2" | Steel | 0000000 | 00000 |
| 9/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 5/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 11/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 3/8" | 4 1/2" | Steel | 0000000 | 00000 |
| 13/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 7/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 1/2" | 4 3/4" | Steel | 0000000 | 00000 |
| 9/16" | 5" | Steel | 0000000 | 00000 |
| 5/8" | 5" | Steel | 0000000 | 00000 |
| 3/4" | 5" | Steel | 0000000 | 00000 |
| 13/16" | 5" | Steel | 0000000 | 00000 |
| 7/8" | 5" | Steel | 0000000 | 00000 |
| 1" | 5" | Steel | 0000000 | 00000 |
| 2mm | 3 3/4" | Steel | 0000000 | 0000 |
| 3mm | 3 3/4" | Steel | 0000000 | 0000 |
| 4mm | 3 3/4" | Steel | 0000000 | 0000 |
| 5mm | 3 3/4" | Steel | 0000000 | 0000 |
| 6mm | 3 3/4" | Steel | 0000000 | 0000 |
| 7mm | 4 1/4" | Steel | 0000000 | 00000 |
| 8mm | 4 1/4" | Steel | 0000000 | 00000 |
| 9mm | 4 1/4" | Steel | 0000000 | 00000 |
| 10mm | 4 1/4" | Steel | 0000000 | 00000 |
| 11mm | 4 1/4" | Steel | 0000000 | 00000 |
| 12mm | 4 1/4" | Steel | 0000000 | 00000 |
| 13mm | 4 1/4" | Steel | 0000000 | 00000 |
| 14mm | 5" | Steel | 0000000 | 00000 |
| 15mm | 5" | Steel | 0000000 | 00000 |
| 16mm | 5" | Steel | 0000000 | 00000 |
| 18mm | 5" | Steel | 0000000 | 00000 |
| 20mm | 5" | Steel | 0000000 | 00000 |
Hammer-Driven Oblong Hole Punches
Make oblong holes in soft, nonmetallic materials. These punches are also known as arch punches.
One-Step Hammer-Driven Gasket and Washer Punch Sets
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fabric, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | Steel | Plastic Case | 00000000 | 0000000 |
| 10 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16" | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm | Steel | Plastic Case | 00000000 | 000000 |
| 25 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2" | Steel | Plastic Case | 00000000 | 000000 |
| 29 Punches, Handle | 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm | Steel | Plastic Case | 00000000 | 000000 |
Replacement Punches
| For Hole Dia. | Material | Each | |
| 1/8" | Steel | 00000000 | 000000 |
| 3/16" | Steel | 00000000 | 00000 |
| 1/4" | Steel | 00000000 | 00000 |
| 5/16" | Steel | 00000000 | 00000 |
| 3/8" | Steel | 00000000 | 00000 |
| 7/16" | Steel | 00000000 | 00000 |
| 1/2" | Steel | 00000000 | 00000 |
| 9/16" | Steel | 00000000 | 00000 |
| 5/8" | Steel | 00000000 | 00000 |
| 3/4" | Steel | 00000000 | 00000 |
| 7/8" | Steel | 00000000 | 00000 |
| 1" | Steel | 00000000 | 00000 |
| 1 1/16" | Steel | 00000000 | 00000 |
| 1 1/8" | Steel | 00000000 | 00000 |
| 1 3/16" | Steel | 00000000 | 00000 |
| 1 1/4" | Steel | 00000000 | 00000 |
| 1 5/16" | Steel | 00000000 | 00000 |
| 1 3/8" | Steel | 00000000 | 00000 |
| 1 7/16" | Steel | 00000000 | 00000 |
| 1 1/2" | Steel | 00000000 | 00000 |
| 1 5/8" | Steel | 00000000 | 00000 |
| 1 11/16" | Steel | 00000000 | 00000 |
| 1 3/4" | Steel | 00000000 | 00000 |
| 1 7/8" | Steel | 00000000 | 00000 |
| 2" | Steel | 00000000 | 00000 |
| 2mm | Steel | 000000000 | 00000 |
| 3mm | Steel | 000000000 | 00000 |
| 4mm | Steel | 000000000 | 00000 |
| 5mm | Steel | 000000000 | 00000 |
| 6mm | Steel | 00000000 | 00000 |
| 8mm | Steel | 00000000 | 00000 |
| 10mm | Steel | 00000000 | 00000 |
| 12mm | Steel | 00000000 | 00000 |
| 14mm | Steel | 00000000 | 00000 |
| 16mm | Steel | 00000000 | 00000 |
| 18mm | Steel | 00000000 | 00000 |
| 20mm | Steel | 00000000 | 00000 |
| 22mm | Steel | 000000000 | 00000 |
| 24mm | Steel | 000000000 | 00000 |
| 26mm | Steel | 000000000 | 00000 |
| 28mm | Steel | 000000000 | 00000 |
| 30mm | Steel | 000000000 | 00000 |
| 32mm | Steel | 000000000 | 00000 |
| 34mm | Steel | 000000000 | 00000 |
| 36mm | Steel | 000000000 | 00000 |
| 38mm | Steel | 000000000 | 00000 |
| 40mm | Steel | 00000000 | 00000 |
| 42mm | Steel | 000000000 | 00000 |
| 44mm | Steel | 000000000 | 00000 |
| 46mm | Steel | 00000000 | 00000 |
| 48mm | Steel | 000000000 | 00000 |
| 50mm | Steel | 000000000 | 00000 |
Economy Hammer-Driven Gasket and Washer Punch Sets
This set includes common ID and OD sizes to create gaskets and washers in two strikes.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 000000 |
Quick-Release Hammer-Driven Gasket and Washer Punch Sets
Quickly switch between inner and outer punches to create washers faster than with standard sets.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Fiberglass, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 7 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 0000000 |
| 13 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Hole Punch Sets
The handle and punch are one complete tool.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 6 Punches | 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" | Steel | Plastic Pouch | 0000000 | 000000 |
| 6 Punches | 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Fabric, Leather, Rubber | |||||
| 5 Punches, 5"-Lg. Awl, 7"-Lg. Snips with a 1 3/4" Cut Length | 1/4", 3/8", 1/2", 5/8", 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 5 Punches | 1 1/16", 1 1/4", 1 3/8", 1 5/8", 1 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Nylon Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Cork, Fabric, Leather, Rubber | |||||
| 6 Punches | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | Steel | Plastic Pouch | 0000000 | 00000 |
Hammer-Driven Small Hole Punch Sets
Screw one of the interchangeable heads into the included handle to create holes in your material.
| Includes | For Hole Dia. | Handle Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 7 Interchangeable Screw-In Punch Heads, Handle | 5/64", 3/32", 7/64", 1/8", 5/32", 11/64", 3/16" | 3 1/2" | Steel | 000000 | 000000 |
Hand-Driven Hole Punches
Turn the handle of these punches while pushing down to punch holes in cork and rubber. Also known as cork borers, these tools have precision-ground edges that can be sharpened.
| For Hole Dia. | Lg. | Material | Handle Material | Each | |
For Use On Cork, Rubber | |||||
|---|---|---|---|---|---|
| 3/16" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 000000 |
| 1/4" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 00000 |
| 5/16" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 00000 |
| 3/8" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 00000 |
| 7/16" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 00000 |
| 1/2" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 00000 |
Hand-Driven Hole Punch Sets
This set includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material. Turn the handle of these punches while pushing down to punch holes in cork and rubber. Also known as cork borers, these tools have precision-ground edges that can be sharpened.
| Includes | For Hole Dia. | Lg. | Material | Handle Material | Each | |
For Use On Cork, Rubber | ||||||
|---|---|---|---|---|---|---|
| 6 Punches, Material Removal Tool | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 4 1/2" | Zinc-Plated Brass | Plastic | 0000000 | 000000 |