Hose Brackets | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Band Width Band Width

	Center-to-Center Center-to-Center

	Maximum Clamp ID Maximum Clamp ID

	Thickness Thickness

Forward

How can we improve?

6,428 Products

Vibration-Damping Routing Clamps

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Plastic Routing Clamps

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Multiline Plastic Routing Clamps

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

Snap-In Plastic Routing Clamps

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Two-Line Chemical-Resistant Plastic Routing Clamps

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Chemical-Resistant Plastic Routing Clamps

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Plastic Expansion Routing Clamps

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Connectable Plastic Routing Clamps

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Lock-Close Strut-Mount Plastic Routing Clamps

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Adhesive-Back Plastic Routing Clamps

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Two-Line Routing Clamps

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Loop Clamps

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Plastic Loop Clamps

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Multiline Loop Clamps

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Riser Clamps

Support vertical pipes passing through floors.

Riser Clamps for Insulated Pipe

Use these clamps to route insulated pipe through floors. They have a plastic insert that creates a seal around the pipe's insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Adjustable Clamping Hangers

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Push-to-Lock Plastic Clamping Hangers

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Quick-Mount Plastic Clamping Hangers

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Pipe Cradles for Loop Hangers

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Clamping Hangers

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

Strap-Mount Clamping Hangers

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Hook-Mount Hangers

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height.

U-Bolts

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Nonconductive U-Bolts

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Routing Rings and Hooks

Routing J-Hooks

Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.

Multiline Routing J-Hooks

Keep multiple bundles of wire and cable on separate hooks. The hooks have wide openings to allow access for installation, adjustment, and removal.

Nonconductive Routing Rings

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Routing S-Hooks

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Magnetic Routing Ring Bases

Temporarily mount routing rings and other threaded components to steel and iron surfaces.

Wire-Mount Routing Rings

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.

Removable Routing Ringbolts

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Routing Rings

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Standoff Brackets

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Strut-Mount Routing Saddles for Insulated Pipe

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Mountable Hook and Loop Cable Ties

Screw-In Mount Hook and Loop Cable Ties

Attach with a screw or other fastener.

Carabiner-Mount Hook and Loop Cable Ties

Quickly attach and detach a bundle.

Adhesive-Back Hook and Loop Cable Ties

Stick these ties to any smooth, clean surface.

DIN-Rail-Mount Hook and Loop Cable Ties

Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.

Hook and Loop Mount Cable Ties

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Hook and Loop Cable Ties

Weather-Resistant Hook and
Loop Cable Ties with Buckle

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

Hook and Loop Cable Ties with Buckle

The buckle allows you to cinch these ties tight.

Strong-Grip Hook and Loop Cable Ties with Buckle

The hook and loop on these ties holds more tightly than other hook and loop.

Easy-to-Grab Hook and Loop Cable Ties with Buckle

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

High-Temperature Hook and
Loop Cable Ties with Buckle

Ties are made from heat-resistant aramid fabric to withstand temperatures up to 350° F.

ID Tag Hook and Loop Cable Ties with Buckle

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Elastic Hook and Loop Cable Ties with Buckle

These ties stretch to hold material tightly without slipping.

Cut-to-Length Hook and Loop Cable Ties

Create custom-length ties from a roll with hook on one side and loop on the other.

Very Flexible Cut-to-Length Hook and Loop Cable Ties

Able to fit small bundles, these thin ties are more flexible than other ties.

Cut-to-Length Hook and Loop Cable Ties with Buckles

Create a cable tie with a buckle—no sewing required.

Very Flexible Hook and Loop Cable Ties

Flexible enough for small bundles, these ties are often used for electronics.

Hook and Loop Cable Ties

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Flame-Retardant Hook and Loop Cable Ties

These ties meet UL flammability requirements.

ID Tag Hook and Loop Cable Ties

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Stainless Steel Hook and Loop Cable Ties

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Hook and Loop Cable Tie Assortments

Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.

Hook and Loop Cable Ties with Buckle Assortments

The buckle allows you to cinch these ties tight.

Hook and Loop Cable Ties with Handle

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

Cable Holders

Mount to a surface to secure and route cable.

DIN-Rail-Mount Adapters for Cable Holders

Add push-in cable holder to this adapter to mount cable to DIN rail.

Multiline Hammer-In Cable Holders

Secure multiple cable bundles with a single holder.

Foam Cable Holders

Grip delicate cables with these holders.

Staple-Style Hammer-In Cable Holders

Standoff-Style Cable Holders

These mounts create space between a bundle and surface.

Hammer-In Cable Holders

Multiline Standoff-Style Cable Holders

Keep individual wires separate by laying them between the coils on these holders.

Spool-Style Cable Holders

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

Mountable Cable Ties

Attach these cable ties directly to a surface—no separate mount needed.

Fine-Adjustment Mountable Cable Ties

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Cable Tie Assortments

Padded Cable Tie Assortments

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Choose-a-Color Cable Tie Assortments

Identify bundles at a glance.

Cable Tie Assortments

Keep an assortment of cable ties on hand.

Long-Lasting Cable Tie Assortments

These ties are less likely to crack and break from dryness than regular cable ties.

Cable Ties

Long-Lasting Cable Ties

These ties are less likely to crack and break from dryness than regular cable ties.

Self-Snipping Cable Ties

Use the built-in blade to remove excess length once these ties are secure.

No-Snag Cable Ties

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

Metal-Detectable Cable Ties

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Easy-Removal Cable Ties

Pull the tab to tear off these cable ties.

Temporary-Hold Cable Ties

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

Chemical-Resistant Cable Ties

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

No-Gap Curved-Head Cable Ties

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

No-Gap Fine-Adjustment Cable Ties

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Multiple-Bundle Cable Ties

Secure and separate parallel bundles with the same tie.

Reusable Cable Ties

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

High-Strength Cable Ties

These strong, wide ties are often used as an alternative to metal strapping.

Cable Ties

Bundle and secure cable, wire, and hose.

Fixed-Loop Cable Ties

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Cable Ties with Material Certification

These cable ties come with a material certificate with traceable lot number and product shelf life.

No-Gap Flexible-Body Cable Ties

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

Static-Dissipative Cable Ties

Protect sensitive electronic equipment from static buildup.

Padded Cable Ties

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Flame-Retardant Cable Ties

These ties meet UL flammability requirements.

ID Tag Cable Ties

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Choose-a-Color Cable Ties

Identify bundles at a glance.

High-Strength Cut-to-Length Cable Ties

Create custom-length cable ties for large bundles and heavy materials.

Cut-to-Length Perforated Cable Ties

Thread the end through one of the perforations to secure.

Elastic Cable Ties

Extra-Wide Elastic Cable Ties

These ties are wide and flat for a no-slip grip.

Elastic Cable Ties

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Elastic Beaded Cable Ties

The evenly spaced ball-shaped beads allow you to adapt to changes in bundle size.

Beaded Cable Ties and Mounts

Beaded Cable Tie Mounts

Mount to a surface and add a beaded cable tie to secure a bundle.

Multiple-Bundle Beaded Cable Ties

Secure and separate two bundles with the same tie.

Beaded Cable Ties

Use in light duty applications such as tagging and attaching documentation to equipment.

Metal Cable Ties and Mounts

Stainless Steel Cable Ties

For use in the harshest environments, these ties withstand chemicals and UV rays.

Choose-a-Color Plastic-Coated
Stainless Steel Cable Ties

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

Expandable Stainless Steel Cable Ties

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

Plastic-Coated Stainless Steel Cable Ties

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Aluminum Cable Ties

Stamp or emboss these ties to identify material.

Clamps for Firm Hose and Tube

Tight-Seal High-Torque Bolt Clamps for Firm Hose

Clamps offer extra holding power in high-torque applications.

Tight-Seal Twin-Ring Bolt Clamps for Firm Hose

A double ring of thick wire provides a complete seal around large-diameter hose.

Tight-Seal Bolt Clamps for Firm Hose and Tube

These clamps form a 360° seal around your hose or tube to prevent leaks.

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

Clamps have a slotted screw. Tighten with a slotted screwdriver, hex nut driver, or a wrench.

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

General Purpose Bolt Clamps for Firm Hose

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Wide-Seal Plastic Clamps for Firm Hose

Slide these clamps over your hose and heat-shrink them with a heavy duty heat gun. This process lets them conform to any shape hose.

Constant-Tension Spring-Band
Clamps for Firm Hose and Tube

These clamps have a wider band than other constant-tension clamps, which provides more coverage and reduces the chance of leaks.

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Easy-Install Snap-Grip Clamps for Firm Hose and Tube

Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.

Low-Profile Band Clamps for Firm Hose

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Quick-Release Clamps for Firm Hose and Tube

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Extra-Strength Low-Profile Band Clamps for Firm Hose

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

Constant-Tension Spring
Clamps for Firm Hose and Tube

Not as bulky as our other constant-tension clamps, these round-wire clamps easily fit in cramped spaces. Use in low-pressure applications.

Constant-Tension Bolt Clamps for Firm Hose and Tube

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Duct Hose Clamps

Duct Hose Clamps with Grounding Cable

Prevent static charge buildup while securely connecting duct hose with a wire spiral.

Quick-Release Duct Hose Clamps

Flip the toggle latch to install and remove these clamps in seconds.

Duct Hose Clamps for Spiral Duct

Also known as bridge clamps, these worm-drive clamps align with the spiral support on wire duct hose to provide a tight seal.

Work-Load-Rated Quick-Release Duct Hose Clamps

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Clamps for Soft Hose and Tube

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Remove the bolt and flip open the hinged bridge to install.

Tight-Seal Bolt Clamps for Soft Hose and Tube

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Tight-Seal Bolt Clamp Assortments
for Soft Hose and Tube

The hose clamps in these assemblies have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into soft hose and tube materials such as silicone.

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

Quick-Release Clamps for Soft Hose and Tube

These clamps have rounded edges and a smooth interior, so they won’t cut into soft hose and tube materials such as silicone. Flip up the slotted hex head screw to quickly release the band.

Worm-Drive Clamps for Soft Hose and Tube

An extended tail acts as a liner to protect soft hose and tube from being cut by the slots in the band.

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

Constant-Tension Clamps for Soft Hose and Tube

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

Create 2" diameter and larger smooth-band worm-drive clamps.

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Guards for Hose and Tube Clamps

Cover the ends of hose and tube clamps to prevent them from cutting people and nearby objects.

Hose and Hose Fittings

Hose Supports

Elevate hose off the ground to protect it from damage, and to let water on the floor reach a drain.

Mounting Brackets for Medium Duty and
Heavy Duty Automatic-Winding Hose Reels

Floor-mount brackets swivel 345°. Beam-mount brackets easily mount overhead on I-beams or H-beams. Wall-mount brackets pivot 180°

Interlocking Clamps for Hose Fittings for Steam

Use with interlocking-clamp hose fittings to replace a damaged clamp. They consist of two halves held together by nuts and bolts.

Cable and Hose Carriers

Lay-In Snap-Together Open Cable and Hose Carriers

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Feed-Through Snap-Together
Open Cable and Hose Carriers

Thread cable and hose through the entire length.

Low-Vibration Snap-Together
Open Cable and Hose Carriers

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

Heavy Duty Open Cable and Hose Carriers

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Robot-Ready Cable and Hose Carrier Kits

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Accessories for Any-Which-Way
Cable and Hose Carriers

Use these accessories to mount carriers to your machinery without creating an obstruction.

Snap-Together Enclosed Cable and Hose Carriers

By completely surrounding the cable and hose, these carriers protect them from dirt, chips, and debris.

Any-Which-Way Enclosed Cable and Hose Carriers

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Cable and Hose Trays

Steel Formable Cable and Hose Trays

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Corrosion-Resistant Stainless Steel
Formable Cable and Hose Trays

These are the most corrosion-resistant tray systems we offer.

Cable and Hose Trays

Create a system to route cable and hose by connecting components such as straight trays and tees.

Zinc-Plated Steel Formable Cable and Hose Trays

The zinc plating on these tray systems offers good corrosion resistance.

Cable Clips for DIN Rails

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

Fastening and Joining

Spring Clamp Pliers

Install and remove spring-tension hose clamps.

Pinch Clamp Pliers

Crimp pinch clamps closed on hose and tube. Also known as pinch clamp pincers.

Spring-Band Clamp Pliers

The tips adjust to accommodate the clamps often found on heater and radiator hoses.

Insulated Staples for Signal Wire

Secure and insulate round signal wire such as data and communication wire.

Staples for Signal Wire

These curved staples snuggly hold round signal wire such as coaxial cable and telephone wire.

Staples for Building Cable

Use these flat staples to secure romex cable.

Duct and Fittings

Quick-Disconnect Duct and Fittings

Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.

Straight-Run Fabric Duct

Evenly distribute air from fans and blowers throughout large spaces.

Hose and Tube Pliers

Hose and Tube Gripping Pliers

Curved, serrated jaws firmly grip hose and tube for installation and removal without damage.

Hose and Tube Pinch-Off Pliers

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Strut Channel Brackets for Quick-Connect Clamps

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Noncontact Flow-Adjustment Valves

These valves press down on the outside of tubing to adjust flow without contacting the process media.

Panel-Mount Noncontact Flow-Adjustment Valves

For installation in instrument panels, these valves have a hex nut and threads below the handle. They press down on the outside of tubing to adjust flow without contacting the process media.

Plastic Noncontact Flow-Adjustment Valves

With no metal parts, these valves are often used for noncontact flow adjustment in wet conditions and harsh environments. All press down on the outside of tubing to adjust flow without contacting the process media.

Vibration-Damping Routing Clamps

Two-Line Weld-MountVibration-Damping Routing Clamps

Weld-Mount Vibration-Damping Routing Clamps

Vibration-Damping Routing Clamps

Two-Line Rail-MountVibration-Damping Routing Clamps

Rail-Mount Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Magnetic Vibration-Damping Routing Clamps

Strut-Mount Vibration-Damping Routing Clamps

Plastic Routing Clamps

Plastic Routing Clamps

Multiline Plastic Routing Clamps

Snap-In Plastic Routing Clamps

Two-Line Chemical-Resistant Plastic Routing Clamps

Chemical-Resistant Plastic Routing Clamps

Plastic Expansion Routing Clamps

Connectable Plastic Routing Clamps

Lock-Close Strut-Mount Plastic Routing Clamps

Adhesive-Back Plastic Routing Clamps

Routing Clamps

Routing Clamps

Two-Line Routing Clamps

Strut-Mount Metal Routing Clamps

Narrow-Space Strut-Mount Metal Routing Clamps

Strut-Mount Metal Routing Clamps for Insulated Pipe

Standoff Strut-Mount Metal Routing Clamps

Low-Profile Strut-Mount Metal Routing Clamps

Cut-to-Length Routing Clamps

Cut-to-Length Routing Clamps

Loop Clamps

Vibration-Damping Loop Clamps

Multiline Vibration-Damping Loop Clamps

Snug-Fit Vibration-Damping Loop Clamps

Plastic Loop Clamps

Loop Clamps

Multiline Loop Clamps

Adjustable Standoff Clamps

Adjustable Standoff Clamps

Riser Clamps

Riser Clamps

Riser Clamps for Insulated Pipe

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Adjustable Clamping Hangers

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Stackable Threaded-Rod-Mount Clamping Hangers

Push-to-Lock Plastic Clamping Hangers

Plastic Clamping Hangers

Quick-Mount Plastic Clamping Hangers

Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Washdown Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Stackable Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Stainless Steel Threaded-Rod-Mount Loop Hangers

Side-Load Threaded-Rod-Mount Loop Hangers

Pivoting Threaded-Rod-Mount Loop Hangers

Swivel Threaded-Rod-Mount Loop Hangers

Pipe Cradles for Loop Hangers

Threaded-Rod-Mount Roller Loop Hangers

Threaded-Rod-Mount Multiline Hangers

Clamping Hangers

Strap-Mount Clamping Hangers

Strap Hangers

Weld-Mount Clamping Hangers

Suspension Beams for Threaded Rod

Hook-Mount Hangers

U-Bolts

U-Bolt Mounting Plates

U-Bolts

U-Bolts with Mounting Plates

Vibration-Damping U-Bolts

Square U-Bolts

Nonconductive U-Bolts

Clamping U-Bolts

Rubber-Cushioned U-Bolts

Rubber-Cushioned Square U-Bolts

Routing Rings and Hooks

Routing J-Hooks

Multiline Routing J-Hooks

Nonconductive Routing Rings

Routing Ringbolts

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Weather-Resistant Hook and
Loop Cable Ties with Buckle

High-Temperature Hook and
Loop Cable Ties with Buckle