With jaws that lock into position for a good grip, these pliers are designed to remove stripped, rusted, and tamper-resistant screws. They have vertical and horizontal serrations and a tip shaped to firmly grip the outside of screw heads. Their curved jaws create more points of contact with round and irregularly shaped workpieces than other jaw styles, resulting in a strong, tight hold. They can also be used for general purpose gripping. The jaws are spring assisted, so they open automatically when you release the handles. These pliers also have a wire cutter on the jaw.

Quick-release handles make these pliers easier to open with one hand than lever-release pliers. You can push the handles open with your fingers. They have plastic grips for comfort.

With the most leverage of any of our installation tools, this tool has a ball handle that makes it easier to ratchet.

Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding.

As you squeeze the handles, the vise-like jaws lock tightly onto the ferrule to secure barbed fittings onto your hose. To select the correct pliers, measure the hose OD and select the next larger size "For Hose OD" below.

With long jaws for reach, these pliers clamp and lock around workpieces in hard-to-access areas. Turn the screw to adjust the pressure and squeeze the handles to lock the jaws firmly. These pliers stay clamped in place to leave your hands free. They have combination jaws with a flat area for general purpose gripping and a curved area for round material.

Curved jaws grip bolt heads and nuts with rounded corners. These pliers lock in a vise-like grip and stay clamped in place, leaving your hands free. Turn the screw to adjust the pressure and squeeze the handles to lock the jaws. Press the lever to release. Pliers have a blade for occasional wire-cutting tasks.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free. Turn the screw to adjust the pressure and squeeze the handles to lock. Sets include two jaw styles: flat-jaw pliers designed to grip flat objects and curved-jaw pliers that provide a good grip on a variety of shapes.

Create a leak-tight seal between polyethylene (PEX) tubing and press-socket fittings for drinking water—no heat or solder necessary. The ratchet action lets you apply the right amount of pressure for a complete crimp. To ensure you’re using the correctly sized crimper, they are color coded to match the compatible fittings. These crimpers are compatible with Viega PEX tubing and Viega PureFlow Press fittings.

Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.

Reach around closely spaced components and other obstructions. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free. Turn the screw to adjust the pressure and squeeze the handles to lock. Press the lever to release. Jaws have a flat area for gripping flat objects and a curved area for round material.

Use to install Extra-Strength Low-Profile Band Clamps for Firm Hose.

Made of stainless steel with long, lockable jaws and thin tips, these pliers can be clamped in place around hard-to-reach objects in areas with moisture and other contaminants. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than steel pliers. Turn the screw to adjust the pressure and squeeze the handles to lock. They have combination jaws, so they have a flat area for general purpose gripping and a curved area for gripping round material.

Tool comes with a built-in cutter and a tension wing handle, as well as a tension nut that can be used instead of the handle in confined spaces. Use with banding and buckles to build your own low-profile band clamps.

You can also use this tool to install our Extra-Strength Low-Profile Band Clamps for Firm Hose—just fit a cutting adapter (sold separately) over the tool.