Crimp-On Ferrules for Air and Water Hose
Use ferrules to create a permanent connection between your air- and water-hose and barbed hose fittings. You will need a hose crimper (sold separately) for installation.
Brass and aluminum ferrules have good corrosion resistance. Choose a ferrule with an ID no more than 0.025" larger than your hose OD (measured with the fitting installed); also make sure the ferrule is at least as long as the barbed end of your fitting.
304 stainless steel ferrules offer very good corrosion resistance. Choose a ferrule with an ID no more than 0.031" larger than the hose OD (measured with the fitting installed).
| Hose End ID | Lg. | Fitting End ID | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 0.275" | 0.5" | 0.217" | 50 | 0000000 | 000000 |
| 0.33" | 0.484" | 0.25" | 50 | 0000000 | 00000 |
| 0.358" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.38" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
| 0.41" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.45" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.478" | 0.688" | 0.328" | 50 | 0000000 | 00000 |
| 0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
| 0.5" | 1" | 0.344" | 25 | 0000000 | 00000 |
| 0.525" | 1" | 0.375" | 25 | 0000000 | 00000 |
| 0.548" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
| 0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
| 0.562" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.575" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
| 0.593" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.6" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.625" | 0.55" | 0.453" | 25 | 0000000 | 00000 |
| 0.625" | 1" | 0.453" | 25 | 0000000 | 00000 |
| 0.65" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.656" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.675" | 0.516" | 0.5" | 25 | 0000000 | 00000 |
| 0.687" | 1" | 0.5" | 25 | 0000000 | 00000 |
| 0.7" | 0.516" | 0.5" | 50 | 0000000 | 00000 |
| 0.718" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.725" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.781" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.8" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.812" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.825" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.85" | 0.563" | 0.688" | 25 | 0000000 | 00000 |
| 0.875" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.9" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.925" | 0.81" | 0.688" | 25 | 0000000 | 00000 |
| 0.975" | 0.844" | 0.688" | 10 | 0000000 | 00000 |
| 1" | 0.844" | 0.687" | 25 | 0000000 | 00000 |
| 1.05" | 0.844" | 0.693" | 25 | 0000000 | 00000 |
| 1.1" | 0.844" | 0.812" | 25 | 0000000 | 00000 |
| 1.15" | 0.844" | 0.875" | 25 | 0000000 | 00000 |
| 1.375" | 0.875" | 1.125" | 10 | 0000000 | 00000 |
Aluminum  | |||||
| 0.375" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
| 0.45" | 0.5" | 0.265" | 50 | 0000000 | 00000 |
| 0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
| 0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
| 0.625" | 0.55" | 0.453" | 50 | 0000000 | 00000 |
| 0.625" | 0.968" | 0.453" | 50 | 0000000 | 00000 |
| 0.675" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 0.55" | 0.5" | 50 | 0000000 | 00000 |
304 Stainless Steel | |||||
| 0.478" | 0.687" | 0.328" | 5 | 0000000 | 0000 |
| 0.53" | 1" | 0.438" | 5 | 0000000 | 0000 |
| 0.56" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.593" | 1" | 0.438" | 5 | 0000000 | 0000 |
| 0.625" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.656" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.69" | 1" | 0.5" | 5 | 0000000 | 0000 |
| 0.718" | 1" | 0.625" | 5 | 0000000 | 0000 |
| 0.75" | 1" | 0.625" | 5 | 0000000 | 0000 |
| 0.925" | 0.968" | 0.75" | 5 | 0000000 | 0000 |
| 1.175" | 0.844" | 0.875" | 5 | 0000000 | 0000 |
Crimp-On Ferrules for Welding Hose
Use ferrules to create a permanent connection between your welding hose and barbed hose fittings. You will need a hose crimper (sold separately) for installation. Ferrules are brass for good corrosion resistance.
| Hose End ID | Lg. | Each | |
Brass | |||
|---|---|---|---|
| 0.45" | 9/16" | 000000000 | 00000 |
| 0.478" | 11/16" | 000000000 | 0000 |
| 1/2" | 1/2" | 000000000 | 000 |
| 1/2" | 1" | 000000000 | 0000 |
| 0.525" | 1/2" | 000000000 | 000 |
| 0.525" | 1" | 000000000 | 0000 |
| 0.548" | 31/64" | 000000000 | 000 |
| 0.562" | 1" | 000000000 | 0000 |
| 0.564" | 3/4" | 000000000 | 0000 |
| 0.575" | 31/64" | 000000000 | 000 |
| 0.593" | 1" | 000000000 | 0000 |
| 5/8" | 1/2" | 000000000 | 0000 |
| 5/8" | 1" | 000000000 | 0000 |
| 0.656" | 1" | 000000000 | 0000 |
| 0.687" | 1" | 000000000 | 0000 |
| 0.718" | 1" | 000000000 | 0000 |
| 3/4" | 1" | 000000000 | 0000 |
| 0.781" | 1" | 000000000 | 0000 |