An internal reinforcement gives this tubing the strength to withstand higher pressures than other soft tubing for food, beverage, and dairy. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it.

Tygon rubber tubing can handle the lowest temperatures. It is opaque, so you cannot see inside the line.

Semi-flexible tubing is good for gradual bends.

For technical drawings and 3-D models, click on a part number.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing. It is made of FDA listed materials, so it is suitable for use with food and beverage. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it.

Rubber tubing meets NSF/ANSI standards for food contact. It is opaque, so you cannot see inside the line. It is semi-flexible, so it is good for gradual bends. All is either Tygon or comparable to Tygon. Tygon rubber tubing is also 3-A certified to meet sanitary design standards.

For technical drawings and 3-D models, click on a part number.

Polypropylene plastic and EPDM rubber combine to create highly resilient tubing that stands up to repeated bending and flexing. It is typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics. Tubing is suitable for use with food and beverage and doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. It is opaque, so you cannot see inside the line to monitor flow.

For technical drawings and 3-D models, click on a part number.

Tubing meets NSF/ANSI Standard 61 for drinking water. It is made without plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it. A lightweight alternative to copper tubing, it connects to fittings with no heat or soldering required. Tubing is opaque, so you cannot see inside the line.

CPVC tubing connects to socket-connect fittings with a CPVC primer and cement (also known as solvent weld). It can handle higher pressures than polyethylene tubing. It is rigid and will not bend. Tubing meets ASTM D2846 specifications and testing requirements for plastic hot- and cold-water distribution systems.

Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.

For technical drawings and 3-D models, click on a part number.