Search Results
Clear All
System of Measurement System of Measurement |
|---|
|
For Use With For Use With |
|---|
|
|
Connection Type Connection Type | Show |
|---|
 | Press In |
Connection Type Connection Type | Hide |
|---|
 |  |
| Hose | Tube |
 |  |
| Pipe | Conduit |
 |  |
| Electrical Box | Ball Socket |
 | |
| Press Fit | Press In |
Spray Pattern Spray Pattern |
|---|
 | Stream |
Tip Material Tip Material |
|---|
|
Maximum Pressure @ Temperature Maximum Pressure@ Temperature |
|---|
|
Gender Gender |
|---|
 | Male |
Maximum Temperature Maximum Temperature |
|---|
|
Body Material Body Material |
|---|
|
Machine-Mount Coolant Nozzles with Press-In Connection
Press these nozzles into unthreaded holes. Holes must meet the specified tolerance to ensure a secure fit. To aim the coolant stream, insert a hex wrench or similar tool into the orifice and rotate the nozzle tip.
Tip extensions (sold separately) thread into the orifice to direct coolant straight to the cutting edge.
For Hole | Material | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Dp. | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Tip Thread Size | Body | Tip | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||||
| 12 mm | 0 mm-0.043 mm | 10.5 mm | Male | Stream | 0.2" | 0.41" | 0.1" | M5 | Acetal Plastic | Stainless Steel | 7.6 | 150 | 160° | 000000 | 000000 | 00000 |
| 15 mm | 0 mm-0.043 mm | 9 mm | Male | Stream | 0.24" | 0.35" | 0.12" | M6 | Acetal Plastic | Stainless Steel | 14.4 | 150 | 160° | 000000 | 00000 | 00000 |
Shoulder Screws
