Mechanical Hydraulic Reservoirs

Filter by

Product Family

Grease Dispensers

System of Measurement

Inch

Grease Outlet Pipe Size

Capacity

Pipe Size

Power Source

Housing Material

Thread Type

NLGI Consistency Grade

Grease Outlet Thread Type

Gender

Material

Lithium/Calcium Blend

For Use With

Grease Color

Environment

Number of Grease Outlets

Bowl Material

Plastic

Steel

Grease Inlet Thread Type

Overall Height

Flow Adjustment Mechanism

Metering Pin

Spring

Time-Set Dial

Maximum Grease Outlet Pressure

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Maximum Temperature

53 Products

Grease Dispensers

Plastic

Bowl

Steel Bowl

A spring delivers a constant, low-pressure flow of grease to your lubrication point, so it never runs dry. They’re best for applications with consistent temperatures, so the viscosity of the grease won’t change how quickly it flows. However, they shouldn’t be used in precision applications because the tension of the spring may change, causing the dispensing rate to change. Mount them close to the lubrication point. They have a standard grease fitting, so you can choose what grease to use, unlike prefilled dispensers. The grease fitting helps close the system to keep out dust and contaminants in dirty environments such as mills. Use grease fitting adapters to match your lubrication point.

Plastic Bowl—Clear—Dispensers with a clear plastic bowl make it easy to see how much grease is left and whether the dispenser is working properly. These dispensers come with three different adjustment springs to fit your dispensing needs.

Steel Bowl—Opaque—Dispensers with a steel bowl are more durable than dispensers with a plastic bowl, so they’re the better choice if there's vibration or impact.

Plastic Housing—Plastic housings are an economical choice when there's minimal vibration.

Anodized Aluminum Housing—Anodized aluminum housings withstand vibration, shock, and impact.

Nickel-Chrome-Plated Aluminum Housing—Nickel-chrome-plated aluminum housings resist corrosion better than plastic and anodized aluminum dispensers.

Remote-Mount Springs—Remote-mount springs (sold separately) provide extra pressure when using thick grease at a distance.

	Dispensers														Remote-Mount Springs
							Grease Outlet
	Cap., fl. oz.	For NLGI Consistency Grade	Flow Rate	Max. Grease Outlet Pressure	Bowl Dia.	Overall Ht.	Gender	Thread Type	Pipe Size	Max. Distance from Lubrication Point	Loading Method	Temp. Range, ° F		Each		Each
Plastic Bowl—Clear







				Plastic Housing

				1	0, 1, 2, 3, 4	Not Rated	5 psi	1 3/4"	3 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K11	000000	1303K23	00000


				2	0, 1, 2, 3, 4	Not Rated	5 psi	2 3/8"	4 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K12	00000	1303K25	0000
				6	0, 1, 2, 3, 4	Not Rated	5 psi	3"	6"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K19	00000	1303K24	00000




						Anodized Aluminum Housing

						1	0, 1, 2, 3, 4	Not Rated	5 psi	1 3/4"	3 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K13	00000	1303K23	0000


						2	0, 1, 2, 3, 4	Not Rated	5 psi	2 3/8"	4 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K14	000000	1303K25	0000
						6	0, 1, 2, 3, 4	Not Rated	5 psi	3"	6"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K15	000000	1303K24	00000




								Nickel-Chrome-Plated Aluminum Housing

								1	0, 1, 2, 3, 4	Not Rated	5 psi	1 3/4"	3 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K16	000000	1303K23	0000


								2	0, 1, 2, 3, 4	Not Rated	5 psi	2 3/8"	4 5/8"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K17	000000	1303K25	0000
								6	0, 1, 2, 3, 4	Not Rated	5 psi	3"	6"	Male	NPT	1/8	6 ft.	Grease Gun	-10 to 250	1303K18	000000	1303K24	00000


								Steel Bowl—Opaque







												Steel Housing

												1/2	1, 2, 3	Not Rated	Not Rated	1 1/4"	4 3/16"	Male	NPT	1/8	Not Rated	Grease Gun	32 to 160	1110K22	000000	———	0


												1 3/4	1, 2, 3	Not Rated	Not Rated	2 1/2"	4 5/16"	Male	NPT	3/8	Not Rated	Grease Gun	32 to 160	1110K23	000000	———	0
												3 1/2	1, 2, 3	Not Rated	Not Rated	2 1/2"	6 3/16"	Male	NPT	3/8	Not Rated	Grease Gun	32 to 160	1110K24	000000	———	0
												8	1, 2, 3	Not Rated	Not Rated	3 1/4"	9 3/4"	Male	NPT	3/4	Not Rated	Grease Gun	32 to 160	1110K25	000000	———	0

Remote-Mount Kits for Grease Dispensers with Plastic Bowl

Shown with

Dispenser

Remote-mount kits include a mounting bracket, tubing, and fittings.

Grease Outlet			Grease Inlet			Tube			Mounting
Thread Type	Thread Size	Gender	Thread Type	Pipe Size	Gender	Lg., ft.	OD	Material	Hole Dia.	No. of Holes	Fasteners Included		Each
SAE-LT	1/4"-28	Male	NPT	1/8	Female	10	1/4"	Nylon	3/8"	2	No	1303K501	000000

Adjustable-Flow Grease Dispensers

For more control over the flow rate of your grease, choose these gas-driven dispensers over spring-driven dispensers. Their continuous flow automatically adjusts based on the dispensing duration you set on their dial (from one to 12 months). Because you control when they’ll empty, these dispensers make it easy to plan maintenance. To prevent over-lubrication when your machine is down, turn the dial to zero to cut off flow without uninstalling the dispenser. They’re best for applications with consistent temperatures, so the viscosity of the grease won’t change how quickly it flows. All have a clear bowl so it's easy to monitor the grease level.

Rated IP68, these dispensers seal out dust and water from temporary submersion. They’re ATEX certified for use where explosive gases and dust could be present, such as mines and oil refineries.

Grease Dispensers


	Flow-Adjustment Time-Set Dial

Grease dispensers that come empty can be filled with the grease of your choice.

Bulk-Filler-Pump Loading and Grease-Gun Loading—Grease dispensers that come empty can be filled with the grease of your choice.

							Grease Outlet
Cap., fl. oz.	For NLGI Consistency Grade	Flow Rate, fl oz/day	Flow Adjustment Mechanism	Max. Grease Outlet Pressure, psi	Bowl Dia.	Overall Ht.	Gender	Thread Type	Pipe Size	Max. Distance from Lubrication Point, ft.	Loading Method	Hazardous Location Rating	Certification		Each



	2	2	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	Bulk Filler Pump, Grease Gun	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	4209N51	000000


	4 1/8	2	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	Bulk Filler Pump, Grease Gun	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	4209N52	00000

Accessories for Dispensers

Filling Adapters for Grease Dispensers

Filling-Adapter

Fitting

Filling Adapters for Grease Dispensers—Attach a filling adapter to make the filling process quick and mess free.

Fitting Type	Pipe Size	Thread Type	Gender	Shape	Material	Grease Fitting Style		Each
Filling Adapter	1/4	BSPP	Female	Straight	Steel	Standard	4209N53	000000

Grease Fitting Adapters


Reducing Adapter	45° Elbow Adapter	90° Elbow Adapter

Grease Fitting Adapters—Grease fitting adapters let you connect these dispensers to your lubrication point if they're different.

Fitting Type	Shape	Material	Connection		Each
Adapter	45° Elbow	Steel	1/4 BSPP Male × 1/4 BSPP Female	3176K61	000000
Adapter	90° Elbow	Steel	1/4 BSPP Male × 1/4 BSPP Female	3176K62	00000
Reducing Adapter	Straight	Steel	1/2 BSPP Male × 1/4 BSPP Female	3176K64	00000
Reducing Adapter	Straight	Steel	3/8 BSPP Male × 1/4 BSPP Female	3176K63	00000

ID
2" to 2 3/16"	51 to 56	2 5/16"	15/16"	3 1/8"	Nylon	20 to 180	UL 2239	1	30075T214	00000

Grease-Filled Dispensers


	Flow-Adjustment Time-Set Dial

Grease-filled dispensers are ready to go right out of the box, so they're faster to install. They eliminate the mess of filling and keep out contaminants because you throw them away when empty. Grease-filled dispensers also reduce the chance you’ll fill a lubrication point with the wrong grease.

Gadus S2 V220—Shell Gadus S2 V220 grease is often used to lubricate the ball and roller bearings that support your highest loads, such as wheels and heavy equipment.

Gadus S3 V220C and Mobilith SHC 220—Mobil Mobilith SHC 220 and Shell Gadus S3 V220C grease remains stable and in place under high pressure, heavy loads, and shock loads. These grease types are common in demanding mining, construction, and automotive applications.

Lubriplate No. 630-AAA—Lubriplate No. 630-AAA grease works with most machinery.

Mobilgrease XHP 221, Mobilgrease XHP 222, and Mobilux EP2—Mobil Mobilgrease XHP 221, Mobil Mobilgrease XHP 222, and Mobil Mobilux EP2 grease resists moisture and sticks to metal even in wet environments, so it’s often used in pulp and paper manufacturing as well as water management facilities.

Mobilith SHC 100—Mobil Mobilith SHC 100 grease stands up to wear, making them great for a wide range of bearing types.

Polyrex EM—Mobil Polyrex EM grease handles moderate loads at high speeds, so it’s a good choice for electric motor bearings in fans, pumps, and dryers.

Calcium Sulfonate Grease Thickener—Grease with a calcium sulfonate thickener has good heat resistance and excellent resistance to moisture and oxidation.

Lithium Grease Thickener—Grease with a lithium thickener offers good heat and moisture resistance.

Polyurea Grease Thickener—Grease with a polyurea thickener has excellent heat resistance and good moisture and oxidation resistance.

Silica Grease Thickener—Grease with a silica thickener has excellent heat resistance and good oxidation resistance. It also resists washing off and reduces corrosion in wet environments.

Molybdenum Disulfide Lubricant Additive—Grease with a moly (molybdenum disulfide) additive has excellent resistance to wear and withstands high-load and high-pressure applications.

PTFE Lubricant Additive—Grease with a PTFE additive reduces friction and helps the grease maintain its lubricity.

Zinc Alloy Lubricant Additive—Grease with a zinc additive neutralizes acid and is a good replacement for leaded grease.

NSF Registered H1—NSF registered H1 dispensers come with grease that’s safe for incidental contact with food.

Cannot Be Sold To—Dispensers cannot be sold to the listed areas due to local regulatory limits on mercury content.

									Grease Outlet
	Cap., fl. oz.	For NLGI Consistency Grade	Grease Color	Flow Rate, fl oz/day	Flow Adjustment Mechanism	Max. Grease Outlet Pressure, psi	Bowl Dia.	Overall Ht.	Gender	Thread Type	Pipe Size	Max. Distance from Lubrication Point, ft.	Hazardous Location Rating	Certification	Food Industry Std.	Cannot Be Sold To		Each
Lubriplate Lubriplate No. 630-AAA—Lithium Grease Thickener with Zinc Alloy Lubricant Additive



		2	1	Off-White	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N22	000000


		4 1/8	1	Off-White	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N11	00000


		Mobil Mobilgrease XHP 221—Lithium Grease Thickener



				2	1	Blue	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N23	00000


				4 1/8	1	Blue	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N12	00000


				Mobil Mobilgrease XHP 222—Lithium Grease Thickener



						2	2	Blue	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N24	00000


						4 1/8	2	Blue	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N13	00000


						Mobil Mobilith SHC 100—Lithium Grease Thickener



								2	2	Red	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N25	00000


								4 1/8	2	Red	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N14	00000


								Mobil Mobilith SHC 220—Lithium Grease Thickener



										2	2	Red	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N26	00000


										4 1/8	2	Red	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N15	00000


										Mobil Mobilux EP2—Lithium Grease Thickener



												2	2	Brown	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N27	00000


												4 1/8	2	Brown	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N16	00000


												Mobil Polyrex EM—Polyurea Grease Thickener



														2	2	Blue	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N28	00000


4 1/8	2													Blue	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N17	00000


Shell Gadus S2 V220—Lithium Grease Thickener



														2	1	Red	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N29	00000


		4 1/8	1											Red	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N18	00000


		Shell Gadus S3 V220C—Lithium Grease Thickener



														2	1	Red	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N31	00000


				4 1/8										1	Red	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N19	00000


				Calcium Sulfonate Grease Thickener



														2	2	Brown	0.006 to 0.06	Time-Set Dial	75	2 1/8"	3 1/4"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N36	000000


														2	2	Brown	0.006 to 0.06	Time-Set Dial	75	2 1/8"	3 1/4"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	NSF Registered H1	—	4209N33	000000
						4 1/4								2	Brown	0.008 to 0.1	Time-Set Dial	75	2 1/8"	4 5/8"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	Canada	3176K9	000000
						4 1/4	2							Brown	0.008 to 0.1	Time-Set Dial	75	2 1/8"	4 5/8"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	NSF Registered H1	Canada	3176K28	000000


						Lithium Grease Thickener



														2	2	Amber	0.006 to 0.06	Time-Set Dial	75	2 1/8"	3 1/4"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N34	00000


								4 1/4						2	Amber	0.008 to 0.1	Time-Set Dial	75	2 1/8"	4 5/8"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	Canada	3176K4	000000


								Lithium Grease Thickener with Molybdenum Disulfide Lubricant Additive



														4 1/4	2	Black	0.008 to 0.1	Time-Set Dial	75	2 1/8"	4 5/8"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	Canada	3176K7	000000


														Lithium/Calcium Blend Grease Thickener with Molybdenum Disulfide Lubricant Additive



														2	2	Black	0.006 to 0.06	Time-Set Dial	75	2 1/8"	3 1/4"	Male	BSPT	1/4	1	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T₂₀₀ 85° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	—	—	4209N35	00000


														Silica Grease Thickener with PTFE Lubricant Additive



												2				2	White	0.006 to 0.065	Time-Set Dial	73	2 1/8"	3 1/8"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	NSF Registered H1	—	4209N32	00000


												4 1/8	2			White	0.012 to 0.135	Time-Set Dial	73	2 1/8"	4 1/2"	Male	BSPP	1/4	3	ATEX I M1 Ex Ia I Ma ATEX II 1 D Ex Ia IIIC T80° C Da ATEX II 1 G Ex Ia IIC T6 Ga IEC Zone 0 Groups IIC, IIB, IIA IEC Zone 20 Groups IIIC, IIIB, IIIA	CE Marked	NSF Registered H1	—	4209N21	00000

Accessories for Dispensers

Grease Fitting Adapters


Reducing Adapter	45° Elbow Adapter	90° Elbow Adapter

Grease Fitting Adapters—Grease fitting adapters let you connect these dispensers to your lubrication point if they're different.

Fitting Type	Shape	Material	Connection		Each
Adapter	45° Elbow	Steel	1/4 BSPP Male × 1/4 BSPP Female	3176K61	000000
Adapter	90° Elbow	Steel	1/4 BSPP Male × 1/4 BSPP Female	3176K62	00000
Reducing Adapter	Straight	Steel	1/2 BSPP Male × 1/4 BSPP Female	3176K64	00000
Reducing Adapter	Straight	Steel	3/8 BSPP Male × 1/4 BSPP Female	3176K63	00000

ID
Inch	Metric, mm	Lg.	Wd.	Ht.	Material	Temp. Range, ° F	Specs. Met	Pkg. Qty.		Pkg.
2" to 2 3/16"	51 to 56	2 5/16"	15/16"	3 1/8"	Nylon	20 to 180	UL 2239	1	30075T214	00000