McMaster-Carr logo
    Filter by
    For Beam Shape
    For I-Beam Flange Width
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Construction
    Breaking Strength
    For I-Beam Flange Thickness
    Mounting Location
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products

    Beam Clamps for Hooks and Hangers

    Image of ProductInUse. Front orientation. Contains Annotated. Beam Clamps. Beam Clamps for Hooks and Hangers, Style A.
    Image of ProductInUse. Front orientation. Contains Annotated. Beam Clamps. Beam Clamps for Hooks and Hangers, Style B.

    Style A

    Style B

    Image of ProductInUse. Front orientation. Contains Annotated. Beam Clamps. Beam Clamps for Hooks and Hangers, Style C.
    Image of ProductInUse. Front orientation. Contains Annotated. Beam Clamps. Beam Clamps for Hooks and Hangers, Style D.

    Style C

    Style D

    Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
    Style A—Style A clamps fit in low-headroom areas. Two bolts with spacers grip each side of the beam. Note: Capacity applies only to vertical loads.
    Style B—Style B clamps have a T-handle for quick and easy attachment and removal. To use, attach hooks to the mounting bar at the bottom of the clamp. Note: Capacity applies only to vertical loads.
    Style C—Style C clamps have a T-handle for quick and easy attachment and removal. Note: Capacity applies only to vertical loads.
    Style D—Style D clamps grip the sides and center of the beam for securely hanging equipment such as chain hoists and slings. They have a T-handle for quick and easy attachment and removal. Note: Capacity applies to loads 0° to 90° from vertical.
    For
    Beam Thk.
    Mounting
    Bar
    Eye
    Style
    For Beam
    Shape
    For Beam Wd.
    Min.
    Max.
    Lg.
    Thk.
    Dia.
    Thk.
    Max. Mounting
    Clearance
    Wt. Cap.,
    lb.
    Mount
    Type
    Lg.
    Wd.
    Ht.
    Each
    Bottom-Center Beam Mount
     
    Steel
    AFlat, Taper4" to 8"1/8"15/16"——1 3/16"1/2"—5,000Clamp On12"6 1/2"2 1/2"8821T110000000
    AFlat, Taper8" to 12"1/8"1 1/8"——1 3/16"1/2"—5,000Clamp On16"6 1/4"2 1/2"8821T12000000
    AFlat, Taper12" to 16"1/8"1 13/16"——1 3/16"1/2"—5,000Clamp On20"6"2 1/2"8821T13000000
    AFlat, Taper16" to 20"1/8"1 13/16"——1 3/16"1/2"—5,000Clamp On24"7"2 1/2"8821T14000000
    BFlat, Taper3" to 9"—13/16"1/8"25/32"——1 1/4"2,000Clamp On14 1/2"3"9 1/8"8941T71000000
    BFlat, Taper3" to 9"—13/16"1/8"25/32"——1 1/4"4,000Clamp On15"3"9 1/4"8941T72000000
    BFlat, Taper3 1/4" to 12 1/2"—1 5/16"3/16"7/8"——2 3/8"6,000Clamp On16 3/4"4"13 1/4"8941T73000000
    BFlat, Taper3 5/8" to 12 1/8"—1 5/16"3/16"1 1/8"——1 3/4"10,000Clamp On18 3/4"4"13 1/2"8941T74000000
    BFlat, Taper3 5/8" to 12 1/2"—1 3/8"3/16"1 5/8"——2 5/8"20,000Clamp On19"4 5/8"13 7/8"8941T75000000
    CFlat, Taper3" to 7 1/2"—7/8"——3 3/4"25/32"—4,475Clamp On11 1/4"6 3/8"9 7/8"8941T25000000
    CFlat, Taper3" to 7 1/2"—7/8"——3 3/4"25/32"—6,700Clamp On11 1/4"6 1/2"9 7/8"8941T26000000
    CFlat, Taper3" to 7 1/2"—7/8"——4 1/8"1"—11,200Clamp On12 1/4"7 3/4"11 7/8"8941T18000000
    CFlat, Taper3 1/2" to 12"—1"——3 3/4"25/32"—6,700Clamp On16 1/4"8 3/8"14 1/4"8941T27000000
    CFlat, Taper3 1/2" to 12"—1"——4 1/2"1"—11,200Clamp On16 1/4"8 3/8"14 7/8"8941T16000000
    CFlat, Taper6" to 10"—7/8"——3 7/8"1"—8,950Clamp On16 1/4"7 3/4"13"8941T13000000
    CFlat, Taper6" to 12"—1 5/8"——4 1/8"1"—11,200Clamp On18 1/4"8 3/8"14 1/4"8941T42000000
    CFlat, Taper8" to 18"—1 5/8"——4 1/8"1"—13,425Clamp On22 1/4"8 3/8"18"8941T14000000
    DFlat, Taper6" to 8"—1"——2 5/8"25/32"—6,700Clamp On16 1/4"2 3/4"9"8941T6200000000
    DFlat, Taper6" to 12"—1"——2 7/8"1 25/32"—11,200Clamp On23 1/4"3 3/4"10 3/4"8941T6300000000
     

    I-Beam Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors.
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Rolling with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Stationary

    Rolling with Roller Bearings

    Image of Product. Rolling. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Rolling

    Clamp these anchors onto I-beams—they give you a secure place to clip your fall-arrest lanyard without damaging the beam surface. Plus, they’re reusable and don’t require tools to install and remove. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Rolling with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Stationary

    Rolling with Roller Bearings

    Image of Product. Rolling. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Rolling

    Stationary—Stationary anchors mount to horizontal and vertical I-beams. They’re great when working in a single location.
    Rolling—Rolling anchors move with you, so you’re free to work along the length of the beam.
    Roller Bearings—Those with roller bearings are best when you need to move back and forth frequently. They roll along the beam with less effort than with other mobile anchors.
    Bronze Insert—Those with bronze inserts glide smoothly for easy movement.
    For I-Beam
    Flange
    Wd.
    Thk.
    Material
    Insert
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Stationary
    4" to 14"1 1/2"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T230000000
     
    Rolling
    3 1/2" to 14"1 1/4"Aluminum—D-Ring5,000400ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T24000000
    12" to 30"2 1/2"AluminumBronzeD-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029893N11000000
     
    Rolling with Roller Bearings
    4" to 14"1 1/8"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029893N12000000
     

    Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors.
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Move these anchors between work sites—they loop around beams, rails, and other approved structures. They’re quick to install and don’t require any tools. Plus, they won’t damage your anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Wire Rope—Wire rope anchors resist cuts and abrasion better than webbing anchors, so they last longer.
    Cinching Buckle—Anchors with a cinching buckle, also known as boom straps, are designed to be attached to the arm of a bucket truck. Tighten them for a snug, nonslip fit.
    Roller Cable—Anchors with a roller cable are a good choice when you have to move back and forth while staying tethered. Use the included carabiner to attach the two loop ends together.
    Nylon Liner—Webbing anchors with a nylon liner have an extra layer to protect the webbing from wear and tear.
    Lg.,
    ft.
    Material
    Liner
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    3Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N11000000
    6Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1200000
    12Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1300000
     
    Webbing with Cinching Buckle
    4Polyester Fabric—D-Ring5,000350ANSI/ASSP A10.32, ANSI/ASSP Z359.111005T1400000
     
    Wire Rope
    4Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1400000
    6Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1500000
     
    Wire Rope with Roller Cable and Carabiner
    6Steel—Reinforced Loop × Reinforced Loop5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N17000000
     

    Clamp-On Fall-Arrest Anchors

    Image of ProductInUse. Side1 orientation. Fall-Arrest Anchors. Clamp-On Fall-Arrest Anchors.
    A secure hold that won’t damage your mounting surface—these anchors clamp onto stable structures such as half-walls to give you a place to clip your fall-arrest lanyard. Even though they clamp, they grip firmly with set screws and a locking pin. Made of powder-coated steel, they’re tough enough to stand up to frequent use, even outdoors. Protective pads on the clamp arm and set screws keep them from scratching your surface. When used with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Opening
    Max.
    Min.
    Reach
    Lg.
    Material
    Color
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    15"0"8"Powder-Coated SteelBlackD-Ring5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029690N1010000000
     

    Parallel Beam-to-Beam Clamps

    Image of ProductInUse. Front orientation. Beam Clamps. Parallel Beam-to-Beam Clamps.
    Join two beams in a straight line without drilling or welding. The bolt can be removed to insert threaded rods.
    Galvanized Iron—Galvanized iron clamps have better corrosion resistance than zinc-plated iron clamps.
    Zinc-Plated Iron—Zinc-plated iron clamps have mild corrosion resistance.
    For
    Beam Thk.
    Galvanized Iron
    Zinc-Plated Iron
    For Beam
    Shape
    For Thread
    Size
    Min.
    Max.
    Wt. Cap.,
    lb.
    Mount
    Type
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Each
    Each
    FlatM10
    		3/4"1 11/16"425Clamp On1"2 1/8"1"3 3/4"3272T460000003272T41000000
    FlatM12
    		1"2 3/8"625Clamp On1 3/8"2 7/8"1 1/4"5 1/2"3272T47000003272T4200000
    FlatM16
    		1 1/8"2 3/4"1,250Clamp On1 11/16"3 1/2"1 3/8"5 3/8"3272T48000003272T4300000
    FlatM20
    		1 1/4"3 1/4"1,875Clamp On2"4 1/8"1 3/4"7 1/2"3272T490000003272T4400000
    FlatM24
    		1 3/4"3 3/4"3,125Clamp On3"6 1/4"2 1/2"9 1/4"3272T51000000———0

    Angle Iron Beam Clamps for Threaded Rods

    Image of System. Front orientation. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.
    Image of ProductInUse. Shown With One Pair of Angles. Front orientation. Contains Annotated. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.
    Image of ProductInUse. Shown with Two Pairs of Angles. Front orientation. Beam Clamps. Angle Iron Beam Clamps for Threaded Rods.

    Shown With One Pair of

    Angles

    Shown with Two Pairs of Angles

    A secure way to hang threaded rods from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems. They may also be used to connect two pairs of angles at 90°. Clamps are zinc-plated steel for good corrosion resistance. Each clamp includes a bracket and square washer. Secure with a hex nut (sold separately).
    Capacity is the maximum load for two clamps holding a pair of angles across parallel joists. The values listed are for the maximum distance between joists, which is 6 ft. For shorter distances, capacities are higher.
    Washer
    For Thread Size
    For Angle
    Thk.
    For Max.
    Beam Span, ft.
    Wt. Cap.,
    lb.
    Mount
    Type
    Inside
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Threaded Rod
    Included
    Material
    No.
    Included
    Each
     
    Zinc-Plated Steel
    5/8"-11, 5/8"-183/16" to 1/4"6500Clamp On1 1/2"2 3/8"2"2"1/4"NoSteel12465N11000000
     

    Concrete Fall-Arrest Anchors

    Clip your fall-arrest lanyard to a secure connection point on approved concrete surfaces. These anchors expand into a hole, locking against the sides to form a secure hold. They swivel 360° as you move. When used together with a harness and lanyard, these anchors help you meet ANSI and OSHA safety standards.
    Wedge In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Wedge In.
    Wedge-in anchors are more secure than push-in anchors. They expand in the hole as you turn the bolt.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"SteelD-RingSwivel10,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T39000000
     
    Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Push In.
    Push-in anchors are easier to install than wedge anchors, and they’re reusable. Expand and release them by pushing a button. You can attach them to vertical or horizontal surfaces. Made of stainless steel, they resist the weather and grime that could decrease an anchor’s lifespan.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"Stainless SteelD-RingSwivel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T1110000000
     

    Drop-Through Fall-Arrest Anchors

    Anchor your fall-arrest lanyard to overhead grating, girders, and other stable structures. These anchors give you a secure, stable way to clip in without being permanent. Slip these anchors through a hole and the plate on the end catches firmly. When the job’s done, pull the anchor out and use it again. Polyurethane tubing near the plate protects the anchor from abrasion. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Drop Through
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Plate
    Cable
    For Mounting
    Hole Dia.
    Material
    Dia.
    Thk.
    Material
    Construction
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Choose a Cable
    Length, ft.
    Each
    1 3/4" to 2"Steel4"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		9692N1010000000
    1 3/4" to 3"Steel6"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		9692N111000000
    1 3/4" to 6"Steel12"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		9692N121000000
     

    Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors.
    Made of Kevlar, these anchors withstand high heat and electrical arcs that would weaken a standard webbing anchor. They’ve been tested against the highest level of electrical arc-flash hazards to meet ASTM F887. Loop them around beams, rails, and other approved structures—they’re easy to move between work sites. Their webbing construction makes them lightweight and flexible. Plus, they won’t damage the anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Lg.,
    ft.
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    4KevlarD-Ring × Webbing Loop5,000425ANSI/ASSP Z359.18, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.5029656N110000000
     

    Fall-Arrest Anchors

    Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.
    Bolt On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Bolt On.
    Stainless Steel—Stainless steel anchors resist corrosion, so they stand up to outdoor elements and in spaces where moisture and grime could weaken the anchor.
    Mounting
    Holes
    Material
    Dia.
    No.
    of
    Fasteners
    Included
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T41000000
    Stainless Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T4200000
     
    Quick Install Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Push-In Attachment.
    Quick-install push-in anchors mount overhead into vertical holes in steel without requiring any tools. Pull the collar back to retract the spring-loaded blade and slide the anchor into the hole. When you release, the blade rotates to lock the anchor in place. When you’re done, pull the collar back to remove the anchor.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    3/4" to 1 1/4"SteelD-RingRigid5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T43000000
     
    Weld On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Weld On.
    Weld-on anchors swivel 360°, so your lanyard turns smoothly with you as you move.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    SteelD-RingSwivel10,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T440000000
     

    Roof Fall-Arrest Anchors

    Safely clip into these anchors for maintenance, inspection, or construction jobs on your roof. When used together with a lanyard and harness, they help you meet OSHA and ANSI safety standards. Attach them to wood and metal roofs, whether flat or sloped. Made of zinc-plated or powder-coated steel, they withstand moisture, rain, and other outdoor elements.
    Nail On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Style A.

    Style A

    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style A
    111Zinc-Plated SteelYesD-Ring3211/64"5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50211005T17000000
     
    Nail On, Bolt On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Bolt On, Style B.

    Style B

    Style B—Style B anchors are more versatile than Style A anchors—you can even attach them to concrete. Clip your lanyard to any of the four sides for freedom of movement.
    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    Bolt-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Color
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style B
    421Powder-Coated SteelRedNoD-Ring2023/64"41/2"5,000420ANSI/ISEA 125, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029876N1110000000
     

    Strut Channel Fall-Arrest Anchors

    Sliding in a track, these anchors give you freedom of movement while staying safely tethered. They fit into strut channels embedded in concrete for a secure place to clip your fall-arrest lanyard. They take just seconds to install and remove—the two sides of the anchor hook separately into your strut channel and lock together with a carabiner. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Slide In
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    For Channel
    Wd.
    Material
    Connection
    Hardware
    Carabiner
    Material
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    With Carabiner
    1 5/8"Zinc-Plated SteelCarabinerSteel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029691N111000000
     

    Fall-Rescue Packs

    Image of ProductInUse. Side1 orientation. Contains Annotated. Fall-Rescue Packs.
    Image of Product. Front orientation. Fall-Rescue Packs.
    Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.
    Rope
    Material
    D-Ring Location
    (No. of)
    Lg.,
    ft.
    Material
    Construction
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Nylon
    		Back (1)50Aramid FabricBraided310ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502RFID Tag9856N11000000000
    Rescue Poles
    Image of Product. Front orientation. Retrievers.
    Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.
    Rope
    Carabiner
    Extended
    Lg., ft.
    Retracted
    Lg., ft.
    Material
    Lg.,
    ft.
    Material
    Construction
    Opening
    Wd.
    Material
    Wt. Cap.,
    lb.
    Includes
    Each
    102Aluminum
    		12Polypropylene
    		Braided13/16"Aluminum
    		310Carabiner, Carrying Case with RFID Tag, Rope9856N120000000

    Fall-Rescue Kits

    Image of ProductInUse. Ascent Rescue. Side1 orientation. Contains Annotated. Fall-Rescue Kits. Ascent Rescue.
    Image of ProductInUse. Descent Rescue. Side1 orientation. Contains Annotated. Fall-Rescue Kits. Descent Rescue.

    Ascent Rescue

    Descent Rescue

    Image of Product. Ascent Rescue Kit. Front orientation. Fall-Rescue Kits. Ascent Rescue.
    Image of Product. Descent Rescue Kits. Front orientation. Fall-Rescue Kits. Descent Rescue.

    Ascent Rescue Kit

    Descent Rescue Kits

    Everything you need to rescue a person who is suspended after a fall, even if they're injured or unconscious. These kits come tucked in a storage bag, so you can spring into action at a moment’s notice. The storage bag repels water for protection from the weather.
    These are not fall-arrest equipment. For a fall-arrest system, you’ll need a lanyard, harness, and anchor.
    Ascent Rescue—Use ascent rescue kits to lift the suspended person back to a stable location, such as an elevated platform. These kits are ideal when the ground is too far to safely lower someone, or obstacles are in the way.
    Descent Rescue—Use descent rescue kits to lower the suspended person to the ground. They include a pole that telescopes for extra reach with a carabiner holder and hook on the end. Use the pole to do a variety of things—install anchors, attach carabiners to a suspended person’s D-ring, or guide someone around obstacles as they descend. You can even use these kits to evacuate yourself from an elevated platform in emergencies such as a fallen ladder or a fire. The pockets on the backpack are labeled, so you’ll be able to find what you need quickly.
    Application
    Includes
    Rope Lg.,
    ft.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Ascent RescueRatchet Assembly, Rescue Strap, Rope, Rope Clamp, Rope Protector, Storage Bag, Two Carabiners, Wire Rope Clamp10420—9368N110000000
    Descent RescueBackpack, Long Rope, Rescue Pole, Rescue Pole Storage Bag, Rescue Strap, Rescue/Descent Device with Handwheel, Rope Protector, Tool Lanyard, Two Carabiners, Webbing Anchor Point150620ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029368N1200000000

    Tool Tether Anchors

    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound with Extra-Wide D-Ring.

    Wraparound

    Wraparound

    with

    Extra-Wide

    D-Ring

    Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
    Wraparound—Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down.
    Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.
    Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
    ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.
    Wt. Cap.,
    lb.
    For No.
    of Tools
    Connection
    Hardware
    Material
    Cover
    Material
    Construction
    For Max.
    Dia.
    Specs. Met
    Each
    Wraparound
    251D-RingPolyester Plastic—Webbing6"ANSI/ISEA 1219865N13000000
     
    Wraparound with Extra-Wide D-Ring
    505D-RingNylon
    		Nylon
    		Webbing6"ANSI/ISEA 1219865N1200000
     
    back to top