These torches have approximately half the BTU output of standard propane torches for use in light duty applications. They can be directly connected to a propane cylinder. Style A has a pencil-point flame tip that concentrates the flame for detail work. It requires a gas-torch lighter for ignition.

These torches have approximately half the BTU output of standard propane torches for use in light duty applications. Style A requires a gas-torch lighter for ignition.

Get into hard-to-reach areas with these torches that include a hose. They have approximately half the BTU output of standard propane torches for use in light duty applications. Style A requires a gas-torch lighter for ignition.

These torches handle brazing and soldering, as well as heating jobs. A swirl-flame tip creates a small, tight flame for heat concentration and efficient gas usage. Torches can be directly connected to a propane cylinder. Note: Torches can only be used with propylene gas for silver soldering applications. Maximum power output and flame temperature values shown are for use with propane.

The torch tip rotates 360° to put the heat exactly where you need it. This torch can be directly connected to a propane cylinder. Note: Torch can only be used with propylene gas for silver soldering applications. Maximum power output and flame temperature values shown are for use with propane.

Tackle roofing and other heavy duty heating applications—the tips for these torches have a BTU output starting at nearly three times the output of standard high-output propane torches. A gas-torch lighter is required for ignition. Torch does not include a tip. Tips are sold separately.

This torch heats wide and thick surfaces. Used for applications requiring high heat, it also produces higher BTUs per hour than standard propane torches. It can be directly connected to a propane cylinder. Note: Torch can only be used with propylene gas for silver soldering applications. Maximum power output and flame temperature values shown are for use with propane.

Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it. Used for applications requiring high heat, this torch produces higher BTUs per hour than standard propane torches. It can be directly connected to a propane cylinder. A gas-torch lighter is required for ignition. Note: Maximum power output and flame temperature values shown are for use with propane.

Pair these starters with ballasts for high-pressure sodium bulbs.

Pair these starters with pulse-start ballasts for metal halide bulbs.

Prevent accidental activation and limit access—these switches require a key to turn circuits on or off.

Keyed alike switches all open with the same key.

Keyed differently switches each open with a unique key.

Keyed differently/master keyed switches are keyed differently but can be used with a master key (sold separately).

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4, these switches are protected from washdowns. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Keyed alike switches all open with the same key.

Keyed differently switches each open with a unique key.

For technical drawings and 3-D models, click on a part number.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Keyed alike switches all open with the same key.

Keyed differently switches each open with a unique key.

Keyed differently/master keyed switches are keyed differently but can be used with a master key (sold separately).

For technical drawings and 3-D models, click on a part number.

Maximize space in a panel with these miniature switches. They require a key to turn circuits on or off, limiting access to sensitive equipment. All are keyed alike, so they open with the same key.

For technical drawings and 3-D models, click on a part number.