These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety blue is used on “out of order,” “employees only,” and other general-information signs.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water; not for use with drinking water. Apply with a sprayer. The size listed is the combined total of the two parts. Coatings cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

Water-based coatings are the most durable peel-away coatings we offer.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight. They cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).

These two-part epoxy coatings resist chemicals and other solvents. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts. These coatings cannot be sold to the listed jurisdictions due to volatile organic compound (VOC) regulations.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel to prepare the surface for paint while forming a protective layer. Apply with a brush, roller, or sprayer.

Epoxy primers have excellent abrasion resistance. The container size listed is the combined total of the three parts.