Insulation Type Insulation Type |
|---|
 | Coating |
 | Sheet/Strip |
For Use On For Use On |
|---|
Container Type Container Type |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Formulation Formulation |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
Clarity Clarity |
|---|
|
Shear Strength Shear Strength |
|---|
|
About Structural Adhesives
More
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Black adhesive works especially well on foam insulation.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Each | |
Adhesives | |||||||||||
| 16 oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | 00000000 | 000000 |
Spray Adhesives
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Container Size, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
| 78 | 17.9 | 28 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 300 | Not Rated to 180° | White | Foam | CA | 0000000 | 000000 | 000000 |
Cement for Ceramic Insulation
For insulation joints on ovens and furnaces, this cement has excellent temperature resistance.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, gal. | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Max. Temp., °F | Color | For Joining | Each | |
| 1 | Pail | 15 sec. | 90 min. | Thick Liquid | 7,850 | 1000° | Off-White | Ceramic | 000000000 | 000000 |
Pipe Condensation-Reducing Rubber Strips
Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.
Rubber strips are bacteria and UV resistant to protect pipe from corrosion above and below ground.
Vinyl foam strips restrict absorption of water, air, and gas.
| Thick. | Wd. | Lg., ft. | Temperature Range, °F | Flexibility | Backing Type | Color | Each | |
Rubber | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/32" | 2" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
| 1/32" | 4" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
| 1/32" | 6" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
Vinyl Foam | ||||||||
| 1/8" | 2" | 30 | -40° to 180° | Flexible | Adhesive | Gray | 0000000 | 00000 |
Butyl Rubber | ||||||||
| 1/8" | 2" | 30 | -30° to 175° | Flexible | Adhesive | Off-White | 000000 | 00000 |
Cork/Rubber Blend | ||||||||
| 1/8" | 2" | 30 | 20° to 190° | Flexible | Adhesive | Black | 00000000 | 00000 |
Pipe Condensation-Reducing Coatings
Prevent condensation from forming on refrigeration and air conditioning lines and cold-water piping. These coatings adhere to metal, PVC, and CPVC.
Pipe Insulation Coatings
An alternative to jacketing, these coatings create a vapor barrier and protect from conditions outdoors. They are often used on irregularly shaped surfaces, such as fittings, flanges, and valves.
Firebrick Repair Coatings
- Temperature Range: -50° to 2350° F
- Density: 100 lbs./cu. ft.
- Color: Beige
Renew heat resistance and performance of worn firebrick. Apply coating with a brush or spray on for a crack-free seal.
| Container Size, gal. | Approximate Coverage, sq. ft. | Each | |
| 1 | 93 | 000000 | 0000000 |
Extreme-Temperature Cement
- Max. Temperature: 2500° F
- Density: 122 lbs./cu. ft.
- Color: Tan
Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula. A minimum temperature of 212° F is required to harden. Cut hardened cement with a carbide-tipped saw.
Firebrick Bonding Mortar
- Max. Temperature: 3000° F
- Density: 129 lbs./cu. ft.
- Color: Gray
Lay, coat, and bond firebricks. Apply this mortar with a trowel. One pail sets approximately 40 bricks.
| Container Size, lbs. | Approximate Coverage | Each | |
| 15 | 40 Bricks | 000000 | 000000 |
Heat Barrier Putty
Form this reusable putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.
| Container Size, oz. | Begins to Harden, hrs. | Useful Life | Max. Temp., °F | Color | Each | |
| 16 | 12 | Reusable | 2000° | Gray | 00000000 | 000000 |
Heat Barrier Gel
Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.
| Container Size, oz. | Approximate Coverage, sq. ft. | Min. Temp., °F | Density, lbs./gal. | Each | |
| 32 | 40 | 32° | 9 | 000000 | 000000 |
Vibration Damping Coatings
Apply these coatings to irregular shapes and large areas and reduce noise caused by vibration. Keep applying coats until desired noise reduction is achieved.