About External and Internal Grip Pullers
More
Expanding-Collar Internal Grip Pullers
Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
Pin and pin adapter are required to expand the collet inside the object you’re pulling. When the collet is secure, use a bridge with a forcing screw and forcing screw nut to apply force to the object you’re removing (all sold separately). When you need additional force, use the bridge with the slide hammer (sold separately).
Pullers | Pins | Pin Adapter | ||||||
|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Puller Material | For Pin Dia. | Each | Each | Each | |||
| 5/16"-11/32" | Steel | 5/32" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 11/32"-7/16" | Steel | 3/16" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 7/16"-9/16" | Steel | 9/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 9/16"-7/8" | Steel | 13/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 7/8"-1 1/4" | Steel | 1/2" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Expanding-Collar Internal Grip Puller Sets
Get a grip on objects with blind holes—this puller set has a variety of expanding collets that secure bearings and bushings from inside.
Use the pin and pin adapter to expand the collet inside the object you’re pulling. When the collet is secure, use the bridge with the forcing screw and nut to apply force to the object you’re removing. When you need additional force to extract hard-to-remove objects, use the bridge with the slide hammer. Forcefully slide the weight to the top of the slide bar to yank hard on the object you’re pulling.
| For Shaft Dia. | Pin Dia. | Puller Material | Includes | Each | |
| 5/16"-1 1/4" | 5/32", 3/16", 9/32", 13/32", 1/2" | Steel | Five Pullers Slide Hammer Rod (17" Long) Five Pins Pin Adapter 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) Bridge (6 3/4" Reach; 6" Width) Forcing Screw Nut (3/4"-16 Thread Size) Forcing Screws (5/8"-18 and 3/4"-16 Thread Sizes; 12 11/32" Long) Plastic Case | 0000000 | 0000000 |
Internal Grip Pullers
Also known as a pilot bearing puller, use this puller to grip the interior edge of press-fit bearings, oil seals, and bushings. It has a slide hammer that provides force to extract hard-to-remove objects. Choose from the optional jaws (sold separately) to increase the for ID size and reach of your puller. Optional jaws are sold individually.
Jaw Tip | ||||||
|---|---|---|---|---|---|---|
| For ID | Reach | Puller Material | Wd. | Thick. | Each | |
| 1/2"-1 1/2" | 3/4" | Steel | 7/16" | 1/8" | 000000 | 0000000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | Crossbar Oil-Seal Puller Hook 2-Jaw Jaw Bar 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer Three Sets of Jaws (2 3/8", 4 1/8", and 6 1/2" Reaches) | 0000000 | 0000000 |
| Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2” Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 000000 |
Reversible Jaw External/Internal Grip Pullers
Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application. Use the slide hammer to extract hard-to-remove objects.
Optional crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
| For ID | For OD | Reach | Puller Material | T-Handle Material | Each | |
| 1 1/4"-4 1/4" | 1"-4 1/2" | 1 1/4", 3" | Steel | Steel | 000000 | 0000000 |
| Optional Internal Jaws (For 3/4"-2 1/2" ID; 2 3/8" Reach) | 0000000 | Each | 000000 |
| Optional External/Internal Jaws (For 1 1/4"-3 1/2" ID; For 1"-4 1/2" OD; 3 3/4" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 1 1/2"-4 1/2" ID; For 3/4"-5" OD; 4 1/8" Reach) | 0000000 | Each | 00000 |
| Optional External/Internal Jaws (For 2 3/4"-5 1/2" ID; For 3/4"-7 1/2" OD; 6 1/2" Reach) | 0000000 | Each | 00000 |
| Optional 5-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Jaw Bar (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Optional Puller Hook (For 5/8" Minimum ID) | 000000 | Each | 00000 |
| Optional Crossbar (For 1 7/8"-5 5/8" ID; For 1 7/8"-5 5/8" OD; For 0.375" Dia. Cap Screw; Fasteners Included: No) | 000000 | Each | 00000 |
| Replacement 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
| Replacement Adjusting Cone | 00000000 | Each | 00000 |
Reversible Jaw External/Internal Grip
Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | 2-Jaw Internal Grip Puller (For 1/2"-1 1/2" ID; 3/4" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—5-ton Capacity (For Up To 7" OD; 3 1/4" Reach) 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/2" OD) with 13” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Two Sets of Long-Reach Jaws (Three Jaws for 5-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) | 00000000 | 000000000 |
Quick-Hold Reversible Jaw External/Internal Grip Pullers
Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out. Puller base lifts up so you can add or remove jaws to create 2-jaw or 3-jaw configurations.
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Forcing Screws | |||||||||||
| For ID | For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | ||
Combination 2/3 Jaws with Tips on One End | |||||||||||||
| 3"-4" | 3"-4" | 4" | 2 | Steel | Steel | 9/16" | 3/16" | 8 3/4" | M15 × 2.0 | 0000000 | 000000 | 0000000 | 000000 |
| 3"-7" | 3"-7" | 7" | 5 | Steel | Steel | 7/8" | 1/4" | 11 3/4" | M18 × 2.5 | 0000000 | 000000 | 0000000 | 00000 |
Reversible Jaw External/Internal
Grip Puller Sets for Tight Spaces
A flat profile and straight jaws fit in spots where other pullers do not. This puller comes with four pairs of different-sized jaws for use in external and internal pulling jobs.
To grip objects on the outside, attach jaws with tips facing in. To grip objects from inside, attach jaws with tips facing out.
| Capacity, tons | Puller Material | Forcing Screw Material | Includes | Each | |
| 5 | Steel | Steel | Crossbar Forcing Screw (7/8"-9" Thread Size; 8" Long) Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach) Two Jaw-Mounting Screws | 000000 | 0000000 |
| Optional Straight-Tip Jaws (25-ton Capacity; 6" Reach) | 0000000 | Pair | 0000000 |
| Optional Straight-Tip Jaws (25-ton Capacity; 10" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 5" Reach) | 0000000 | Pair | 000000 |
| Replacement Crossbar (5-ton Capacity; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Optional Crossbar (25-ton Capacity; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Replacement Tapered-Tip Jaws (5-ton Capacity; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws (5-ton Capacity; 8" Reach) | 0000000 | Pair | 000000 |