These blowers create an extra-wide field of ionized air to protect against electrostatic discharge in large areas. They can be suspended from a ceiling or mounted to a wall, floor, or machine frame.

Optional filters keep dust and dirt particles out of the airstream.

Spread the range of static control further than static eliminators without a fan. Small enough to fit on your desktop, these create an ionized field across your immediate workspace to protect against electrostatic discharge.

Static eliminators with a heater offer an optional warm airflow for comfort in cool areas.

Static eliminators with a quiet mode have a slower fan speed than other static eliminators and are often used in small-parts and soldering applications. They’re also suitable for use in clean rooms rated to both Federal Standard and ISO classes.

Use the optional articulating arms for positioning the static eliminators.

The replacement filter kits contain one filter retainer, which holds a filter in place, and one filter.

Small enough to fit on your desktop, these create an ionized field across your immediate workspace to protect against electrostatic discharge.

An ionizing bar temporarily neutralizes static to protect against ESD (electrostatic discharge). Air knives create a sheet of high-velocity air for drying and cooling parts, wiping conveyor belts, controlling coating depth, and blowing liquids, chips, and dust from equipment. They conform to OSHA 1910.242(b) requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the air knife.

A power supply (sold separately) is required. It has two ports for connecting up to two air knives.

Air knives can be mounted with an adjustable arm or mounting bracket (sold separately). Knives up 6” wide can be supported with rigid pipe connected to your air supply.

Shim sets (sold separately) install in the airflow slot to adjust the flow and force of air.

These produce the same airflow as standard static-eliminating air knives but are quieter and use 18% less compressed air. They have an ionizing bar that temporarily neutralizes static to protect against ESD (electrostatic discharge). Air knives create a sheet of high-velocity air for drying and cooling parts, wiping conveyor belts, controlling coating depth, and blowing liquids, chips, and dust from equipment. They conform to OSHA 1910.242(b) requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the air knife.

A power supply (sold separately) is required. It has two ports for connecting up to two air knives.

Air knives can be mounted with an adjustable arm or mounting bracket (sold separately). Knives up 6” wide can be supported with rigid pipe connected to your air supply.

Shim sets (sold separately) install in the airflow slot to adjust the flow and force of air.

For technical drawings and 3-D models, click on a part number.

Eliminate static charges and guard against ESD (electrostatic discharge) in electronics assembly and clean room applications. This blowgun requires a clean, dry air supply. A filter at the nozzle tip ensures that the air is clean. Gun conforms to OSHA 1910.242(b) requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the blowgun at 100 psi.

Bend the stand's flexible arm to position the blowgun and it will stay in place. Step on the included foot pedal to activate airflow and static elimination. Good for electronics assembly and clean room applications, this blowgun requires a clean, dry air supply. It conforms to OSHA 1910.242(b) requirements for maximum air outlet pressure.