1/4"-28 Jam Nuts | McMaster-Carr

Filter by

System of Measurement

Hex Nut Profile

Thread Direction

Material

Height

Nut Type

Finish

Cadmium Yellow-Chromate Plated

Passivated

Zinc Plated

Zinc Yellow-Chromate Plated

Fastener Strength Grade/Class

Thread Type

Width

Thread Fit

Unified Standard Class 2B

Unified Standard Class 3B

Fastener Strength Rating

Thread Spacing

Performance

Locking Type

Specifications Met

Military Specification

MS21083C4

MS21083N4

MS35691-7

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

Drive Style

External Hex

Insert Maximum Temperature

Thumb Nut Profile

Head Diameter

35 Products

About Hex Nuts

Choose a hex nut with the right profile, material, and strength for your application.

Thin-Profile Hex Nuts

About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Medium-Strength Steel

These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	1/4"-28	7/16"	5/32"	SAE Grade 5	ASME B18.2.2	100	000000000	00000


	Steel



			1/4"-28	7/16"	5/32"	SAE Grade 5	ASME B18.2.2	100	000000000	0000

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	1/4"-28	7/16"	5/32"	SAE Grade 8	ASME B18.2.2	100	000000000	000000


	Steel



			1/4"-28	7/16"	5/32"	SAE Grade 8	ASME B18.2.2	50	000000000	0000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	1/4"-28	7/16"	5/32"	SAE Grade 2	100	000000000	00000


	Steel



			1/4"-28	7/16"	5/32"	SAE Grade 2	100	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.

Highly-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

Highly-Corrosion-Resistant Black-Oxide 316 Stainless Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. Even if the coating wears off, these nuts will hold up in just about any environment, including salt water and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	5/32"	100	000000000	00000


	Black-Oxide 18-8 Stainless Steel



			1/4"-28	7/16"	5/32"	25	000000000	0000


			Highly-Corrosion-Resistant 316 Stainless Steel



					1/4"-28	7/16"	5/32"	50	000000000	0000


					Highly-Corrosion-Resistant Black-Oxide 316 Stainless Steel



							1/4"-28	7/16"	5/32"	25	000000000	0000

Brass

Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Brass



	1/4"-28	7/16"	5/32"	50	000000000	000000

Left-Hand-Thread Hex Nuts

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.

Corrosion-Resistant Stainless Steel

Highly-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Highly-Corrosion-Resistant 316 Stainless Steel



	1/4"-28	7/16"	7/32"	1	000000000	000000

Left-Hand-Thread Thin-Profile Hex Nuts

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Medium-Strength Steel

These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	1/4"-28	7/16"	5/32"	SAE Grade 5	100	000000000	000000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-28	7/16"	5/32"	SAE Grade 2	100	000000000	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	5/32"	5	000000000	00000


	Highly-Corrosion-Resistant 316 Stainless Steel



			1/4"-28	7/16"	5/32"	1	000000000	0000

Thin-Profile Nylon-Insert Locknuts

About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

	Wd.	Ht.	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	1/4"-28	7/16"	13/64"	SAE Grade 8	250	10	000000000	00000


	Black-Oxide Steel



			1/4"-28	7/16"	13/64"	SAE Grade 8	250	10	000000000	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd.	Ht.	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	1/4"-28	7/16"	13/64"	220	100	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd.	Ht.	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	13/64"	220	50	000000000	00000


	316 Stainless Steel



			1/4"-28	7/16"	13/64"	220	50	000000000	00000

Mil. Spec. Thin-Profile Hex Nuts

These nuts are manufactured and tested to strict U.S. military standards for material and construction. About half the height of standard-profile nuts, they fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	5/32"	MS35691-7	Fed. Spec. FF-N-836	1	000000000	00000

Mil. Spec. Thin-Profile Nylon-Insert Locknuts

These locknuts are manufactured and tested to strict U.S. military standards for material and construction. They are about half the height of standard-profile locknuts to fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Low-Strength Steel

Cadmium Yellow-Chromate-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.

	Wd.	Ht.	Mil. Spec.	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Cadmium Yellow-Chromate-Plated Steel



	1/4"-28	7/16"	7/32"	MS21083N4	250	NASM21083	10	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Mil. Spec.	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	7/32"	MS21083C4	250	NASM21083	5	000000000	000000

Thin-Profile Flex-Top Locknuts for Heavy Vibration

About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Steel

These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Cadmium-Plated Steel



	1/4"-28	7/16"	7/32"	25	000000000	000000


	Steel



			1/4"-28	7/16"	7/32"	10	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	7/16"	7/32"	5	000000000	000000

Knurled-Head Thumb Nuts

Get a good grip on these nuts, even with oily fingers. They have a raised, slip-resistant head, so you can tighten them by hand and make controlled adjustments. Knurled-head nuts have a smaller profile than wing nuts, so they fit in tighter spots.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		1/4"-28	1/2"	1/4"	3/4"	1/2"	Fully Threaded	1	000000000	00000


		1/4"-28	1/2"	1/2"	3/4"	3/4"	Fully Threaded	1	000000000	0000


		Black-Oxide 18-8 Stainless Steel



				1/4"-28	1/2"	1/2"	3/4"	3/4"	Fully Threaded	1	000000000	0000

Plastic

Reinforced Acetal—The best plastic for damp and wet environments, acetal won't swell or lose strength if exposed to moisture. These nuts are reinforced with an aluminum threaded insert, so they can handle more torque than other plastic nuts and won't crack during installation.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Color	Threading	Insert Material	Pkg. Qty.		Pkg.
Reinforced Acetal



		1/4"-28	35/64"	1/16"	1"	23/64"	Black	Fully Threaded	Aluminum	10	000000000	000000


		1/4"-28	35/64"	3/16"	3/4"	23/64"	Black	Fully Threaded	Aluminum	10	000000000	00000

Flanged Knurled-Head Thumb Nuts

The slip-resistant head is easy to grip, while the flange distributes pressure evenly across the mounting surface without the need for a separate washer. These nuts are often used to secure screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Passivated 18-8 Stainless Steel—With an added layer of protection, these nuts stand up to strong acids and other harsh chemicals.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading		Each
18-8 Stainless Steel



		1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	000000000	00000


		Passivated 18-8 Stainless Steel



				1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	000000000	0000

Brass

Brass—With a warm, polished look, these nuts are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments. It is also softer than other metals, so it's easier to thread together.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading	Pkg. Qty.		Pkg.
Brass



		1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	1	000000000	00000