For easy installation in thermowells, tanks, pipes, and other closed vessels, these thermocouples have an NPT male probe connection.

Protect thermocouple wiring from wear and corrosion with an armored stainless steel cable.

Send temperature readings from tanks, containers, and pipes to devices such as remote displays and programmable logic controllers (PLCs) without the need for a separate thermocouple transmitter.

Measure the temperature of liquids and gases without damaging the probe on these transmitters. An included thermowell shields the probe from vibration, corrosion, and shocks in tanks and pipes.

The included thermowell protects the probe from vibration, corrosion, and shock in tanks and pipelines.

The probe tips come attached to mounting connections for fast installation.

Often used with thermocouple thermometers, these probes have a handle for a comfortable grip.

Thick wire with ceramic insulation stands up to extreme air temperatures in forging, die casting, and heat treating.

The armored stainless steel cable resists wear, abrasion, and corrosion in humid and harsh conditions.

Pierce pliable plastics, rubber, and other soft solids to check the internal temperature.

Connect multiple thermocouple probes to an instrument panel.

Convert round-pin male connectors to flat-pin male connectors.

Store up to 500 readings on these thermometers and determine temperature within ±0.75° F accuracy.

The thermocouple probe measures temperatures up to 500° F, and the thermometer housing meets IPX7 for protection from temporary submersion.

For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods.

Remotely check temperature on the go. These thermometers have a magnetic-back display for temporary mounting and a thermocouple probe with a 5-ft. coiled cable.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.