Open the outside handle with a combination or the included key; the inside handle is always unlocked.

Gain access from the outside with a combination; the inside handle is always unlocked.

To gain access from the outside with a key as well as a combination, these handles accept an easy-change lock cylinder. The inside handle is always unlocked.

These handles accept optional HID-compatible proximity cards or key fobs to regulate access for up to 2,000 employees. They are programmable so you can assign different combinations to different people and restrict access when necessary.

Enter a combination to operate electromagnetic locks, electric door strikes, and other access control devices.

For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed.

Gain access from the outside with a combination or an included key. These automatically lock when you close the door.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Designed for use in 1/2" dia. through holes.

Fold the ring handle into the recess to stay out of the way when not in use.

With a finger-grip knob, these latches fit where latches with handles won't.

The mounting screws on these latches are concealed to prevent tampering.

Raise the handle and it swings smoothly for easy latching and unlatching.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

The mounting screws on these latches are concealed to prevent tampering.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Press the button and the handle snaps open; push the handle shut for a secure hold.

Similar to locks on a hotel safe, each user sets a new combination.

These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Mount these padlockable eyes on the inside edge of a door and door frame.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.

No need for a strike plate, these latches hook into a lip or notch.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Each latch comes with a variety of strike plates for different mounting options.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Draw lightweight surfaces together with these latches.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

To prevent accidental opening, these latches have a safety catch.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

Each latch comes with a variety of strike plates for different mounting options.

A safety catch prevents accidental opening.

These latches have a safety catch to prevent accidental opening.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Operate latches around corners and other obstructions—a flexible cable connects the latch to the T-handle.

Hold doors, drawers, and hatches closed with the turn of a handle.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

Doors stay closed with the pressure of rollers against the strike plate.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Each of these cabinet locks opens with its own key.

Choose these locks if you need locks that each open with a different key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Magnetic force holds doors closed.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Keep doors on refrigerators and industrial enclosures closed.