A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Immediately cut power with a single push.

Immediately cut power with a single push.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.

Clip these switches onto nearby structures made from T-slotted framing to quickly cut power with the push of a button.

Save space in your setup—these switches double as handles on machines and equipment.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. Yank the cable anywhere along your line to quickly cut power in emergencies.

It takes two hands to activate these switches, minimizing the risk of accidental equipment start up.

Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. They’re often used with machine guards.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Block access to machinery while it's running. These safety switches link to a single actuator, so no other RFID tag or card can interfere.

Monitor a wide area around dangerous machinery. If a person or object gets too close, these scanners signal your relay or controller to either trigger a warning or shut down the machinery.

Stop battery drain and prevent the theft or unauthorized use of equipment by disconnecting batteries when not in use.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel.

Prevent motors and other equipment from overheating or failing from not having enough voltage. When the supply voltage falls below 35% of the rated voltage, these switches will automatically turn off to protect the circuit from undervoltage.

Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function.

Clearly mark the location of stop switches so they’re easy to find in an emergency.