Material Material |
|---|
|
Pivot Style Pivot Style |
|---|
 |
| Inline |
 |
| Perpendicular |
|
| Inline/Perpendicular |
 |
| Locking Inline |
|
| Locking Inline/Perpendicular |
Pin Material Pin Material |
|---|
|
Mounting Hole Style Mounting Hole Style |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Door Mounting Location Door Mounting Location |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Hinges
More
Cabinet Pivot Hinges
Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide. Use them on doors that cover their frame. Mount the frame leaf to the face of the cabinet frame and the door leaf to the edge of the door. All of these hinges have a nonremovable pin to deter tampering. Capacity is based on one pair of hinges per door. A pair is for one door and includes one top and one bottom hinge.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Pair | |
For Overlay Door—Standard | |||||||||||||||
430 Stainless Steel—Dull | |||||||||||||||
| 13/16" | 29/32" | 2 9/16" | 29/32" | 1 31/32" | 2 9/16" | 0.118" | 270° | 8 | 430 Stainless Steel | Yes | 12 | Countersunk | No. 6 | 00000000 | 000000 |
Barrel-Shaped Mortise-Mount Concealed Cabinet Hinges
Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes to mount flush with door and frame edges. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Hinges for inset doors are for doors that are flush with their frame when the door is closed.
Hinges for overlay doors are for doors that cover their frame.
For technical drawings and 3-D models, click on a part number.
| For Min. Door Thick. | For Cutout Dp. | Leaf Dia. | Range of Motion | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
For Inset Door—Standard | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Brass—Dull | ||||||||||
| 1/2" | 7/16" | 3/8" | 180° | 303 Stainless Steel | No | 2 | Straight | No. 3 | 00000000 | 00000 |
| 5/8" | 1/2" | 7/16" | 180° | Steel | No | 2 | Straight | No. 4 | 00000000 | 0000 |
| 3/4" | 5/8" | 9/16" | 180° | Steel | No | 2 | Straight | No. 6 | 00000000 | 0000 |
For Inset, Overlay Door—Standard | ||||||||||
Brass—Dull | ||||||||||
| 7/8" | 5/8" | 5/8" | 180° | Brass | No | 2 | Countersunk | No. 6 | 00000000 | 0000 |
Mortise-Mount Concealed Cabinet Hinges
Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering. Use them on inset doors that are flush with their frame when the door is closed.
Chrome- and brass-plated zinc hinges are more corrosion resistant than painted zinc.
Router guide (sold separately) is a template for making cutouts.
For technical drawings and 3-D models, click on a part number.
Hinges | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Router Guides | |||||||||||||
| For Min. Door Thick. | For Cutout Dp. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Each | Each | ||
For Inset Door—Standard | |||||||||||||||
Chrome-Plated Zinc—Dull | |||||||||||||||
| 1/2" | 7/16" | 1" | 3/8" | 1" | 3/8" | 0.234" | 180° | Steel | Yes | 4 | Straight | 0000000 | 000000 | 000000 | 00 |
| 1/2" | 7/16" | 1 11/16" | 3/8" | 1 11/16" | 3/8" | 0.219" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 000000 |
| 11/16" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.063" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 9/16" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.219" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 1 3/4" | 1/2" | 1 3/4" | 1/2" | 0.188" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 2 3/8" | 1/2" | 2 3/8" | 1/2" | 0.250" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 1" | 7/8" | 2 3/4" | 5/8" | 2 3/4" | 5/8" | 0.281" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/8" | 1 1/16" | 3 3/4" | 3/4" | 3 3/4" | 3/4" | 0.375" | 180° | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
Brass-Plated Zinc—Dull | |||||||||||||||
| 1/2" | 7/16" | 1" | 3/8" | 1" | 3/8" | 0.234" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 000000 | 00 |
| 1/2" | 7/16" | 1 11/16" | 3/8" | 1 11/16" | 3/8" | 0.219" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 11/16" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.063" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 000000 | 00 |
| 3/4" | 9/16" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.219" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 1 3/4" | 1/2" | 1 3/4" | 1/2" | 0.188" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 2 3/8" | 1/2" | 2 3/8" | 1/2" | 0.250" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 1" | 7/8" | 2 3/4" | 5/8" | 2 3/4" | 5/8" | 0.281" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 1 1/8" | 1 1/16" | 3 3/4" | 3/4" | 3 3/4" | 3/4" | 0.375" | 180° | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
Reinforcing Entry Door Hinges
To reinforce loose or damaged hinges, mount one of these hinges to the top edge of the pull-side of the door. They are for doors that swing in one direction and are flush with the frame or have up to a 1/8" offset. All hinges have a nonremovable pin to deter tampering. To choose a door mounting location, stand on the push side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hinge O'all Wd. | Max. Offset | For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Material | Mounting Fasteners Included | Each | |
Left Side Door Mounting Location | |||||||||||||
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 4" | 1/8" | 1 3/4" | 1 1/2" | 4 3/8" | 1 1/2" | 6 1/4" | 6 1/4" | 0.187" | 270° | Steel | Yes | 0000000 | 0000000 |
| 4 1/2" | 1/8" | 1 3/4" | 1 1/2" | 4 3/8" | 1 1/2" | 6 1/4" | 6 1/4" | 0.187" | 270° | Steel | Yes | 0000000 | 000000 |
Right Side Door Mounting Location | |||||||||||||
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 4" | 1/8" | 1 3/4" | 1 1/2" | 4 3/8" | 1 1/2" | 6 1/4" | 6 1/4" | 0.187" | 270° | Steel | Yes | 0000000 | 000000 |
| 4 1/2" | 1/8" | 1 3/4" | 1 1/2" | 4 3/8" | 1 1/2" | 6 1/4" | 6 1/4" | 0.187" | 270° | Steel | Yes | 0000000 | 000000 |
Concealed Mortise-Mount Entry Door Hinges
These hinges are completely hidden when the door is closed. The hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges. All of these hinges have mild corrosion resistance. They also have a nonremovable pin to deter tampering.
Router guide (sold separately) is a template for making cutouts.
For technical drawings and 3-D models, click on a part number.
Hinges | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Router Guides | |||||||||||
| Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | For Min. Door Thick. | For Cutout Dp. | Pin Material | Mounting Fasteners Included | Each | Each | ||
Chrome-Plated Zinc—Dull | |||||||||||||
| 4 5/8" | 1" | 4 5/8" | 1" | 0.469" | 180° | 1 3/8" | 1 7/16" | Steel | Yes | 0000000 | 000000 | 00000000 | 000000 |
| 4 5/8" | 1 1/8" | 4 5/8" | 1 1/8" | 0.406" | 180° | 1 3/4" | 1 5/8" | Steel | Yes | 0000000 | 00000 | 00000000 | 00000 |
Brass-Plated Zinc—Dull | |||||||||||||
| 4 5/8" | 1" | 4 5/8" | 1" | 0.469" | 180° | 1 3/8" | 1 7/16" | Steel | Yes | 0000000 | 00000 | 00000000 | 00000 |
| 4 5/8" | 1 1/8" | 4 5/8" | 1 1/8" | 0.406" | 180° | 1 3/4" | 1 5/8" | Steel | Yes | 0000000 | 00000 | 00000000 | 00000 |
T-Slotted Framing Pivots
Pivots provide smooth motion at the junction between two T-slotted rails.
Heavy duty pivots have bronze bushings for a longer life than standard pivots.
Inline/perpendicular pivots provide versatile mounting options. Align the tabs to install the pivot inline with, perpendicular to, or at the end of the rail.
Locking inline/perpendicular pivots have a handle that locks in place to position parts or hold doors and lids open. Align the tabs to install the pivot at the end of the rail. The two tabs parallel to the T-Slot must be removed prior to installing the pivot perpendicular to or inline with the rail.
For technical drawings and 3-D models, click on a part number.
| For Rail Ht. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
Inline Pivot with Straight Arms | ||||||
|---|---|---|---|---|---|---|
| 1" | 3" | Silver | Anodized Aluminum | Yes | 000000000 | 000000 |
| 1" | 3" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 20mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 30mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 40mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 45mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
Inline/Perpendicular Pivot with Straight Arms | ||||||
| 20mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 30mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 40mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 45mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
Locking Inline/Perpendicular Pivot with Straight Arms | ||||||
| 1" | __ | Silver | Anodized Zinc | Yes | 000000000 | 00000 |
| 1 1/2" | __ | Silver | Anodized Zinc | Yes | 000000000 | 00000 |
| 20mm | __ | Silver | Lacquer Coated Aluminum | Yes | 0000000 | 00000 |
| 30mm | __ | Silver | Anodized Zinc | Yes | 00000000 | 00000 |
| 40mm | __ | Silver | Anodized Zinc | Yes | 0000000 | 00000 |
| 45mm | __ | Silver | Anodized Zinc | Yes | 00000000 | 00000 |
Perpendicular Pivot with Straight Arms | ||||||
| 1" | 3" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1" | 3" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 20mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 30mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 40mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 45mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| For Rail Ht. | Lg. | Range of Motion | Color | Material | Mounting Fasteners Included | Each | |
Inline Pivot with L Arms | |||||||
|---|---|---|---|---|---|---|---|
| 1" | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 000000 |
| 1 1/2" | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Inline Pivot with L and Straight Arms | |||||||
| 1" | 3" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Inline Pivot with Straight Arms | |||||||
| 1" | 3" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | 4 3/4" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Locking Inline Pivot with Straight Arms | |||||||
| 1" | __ | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1" | __ | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | __ | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | __ | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | __ | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | __ | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Perpendicular Pivot with L Arms | |||||||
| 1" | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | __ | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Perpendicular Pivot with Straight Arms | |||||||
| 1" | 3" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 1 1/2" | 4 1/2" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | 4 3/4" | __ | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Inline/Perpendicular Pivot
for Double and Quad Rails
| For Rail Ht. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
Inline with Straight Arms | ||||||
|---|---|---|---|---|---|---|
| 2" | 3" | Silver | Anodized Aluminum | Yes | 000000000 | 000000 |
| 3" | 4 1/2" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 40mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 60mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 80mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 90mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
Inline/Perpendicular with Straight Arms | ||||||
| 2" | 3" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 2" | 3" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 3" | 4 1/2" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 3" | 4 1/2" | Black | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 60mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 80mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 90mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
Locking Inline/Perpendicular with Straight Arms | ||||||
| 2" | __ | Silver | Lacquer Coated Aluminum | Yes | 000000000 | 00000 |
| 3" | __ | Silver | Anodized Zinc | Yes | 000000000 | 00000 |
| 40mm | __ | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 60mm | __ | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 80mm | __ | Silver | Anodized Zinc | Yes | 0000000 | 00000 |
| 90mm | __ | Silver | Anodized Zinc | Yes | 00000000 | 00000 |
Perpendicular with Straight Arms | ||||||
| 2" | 3" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 3" | 4 1/2" | Silver | Anodized Aluminum | Yes | 000000000 | 00000 |
| 40mm | 2 3/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 60mm | 3 5/8" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 80mm | 4 3/4" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| 90mm | 5 1/2" | Silver | Lacquer Coated Aluminum | Yes | 00000000 | 00000 |
| For Rail Ht. | Range of Motion | Color | Material | Mounting Fasteners Included | Each | |
Locking Inline with Straight Arms | ||||||
|---|---|---|---|---|---|---|
| 2" | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 000000 |
| 2" | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 3" | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 3" | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 000000 |
| 80mm | 90° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
| 80mm | 180° | Silver | Anodized Aluminum | Yes | 00000000 | 00000 |
Strut Channel Pivots
Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.
Zinc-plated steel pivots are more corrosion resistant in wet environments than powder-coated steel.
Galvanized steel pivots have better corrosion resistance in wet environments than zinc-plated steel and can be used outdoors.
304 stainless steel pivots are more corrosion resistant than galvanized steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pivot Type | (A) | (B) | For Strut Channel Wd. | Range of Motion | Thick. | Hole Dia. | Fasteners Included | Each | |
Zinc-Plated Steel | |||||||||
| Single Arm | 5 3/8" | 5 3/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 000000 |
| Double Arm | 4" | 5 7/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 00000 |
Green Powder-Coated Steel | |||||||||
| Single Arm | 5 3/8" | 5 7/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 00000 |
| Double Arm | 4" | 5 7/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 00000 |
Galvanized Steel | |||||||||
| Single Arm | 5 3/8" | 5 7/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 00000 |
| Double Arm | 4" | 5 7/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 000000 |
304 Stainless Steel | |||||||||
| Single Arm | 5 3/8" | 5 3/8" | 1 5/8" | 30°-60° | 1/4" | 9/16" | No | 000000000 | 000000 |