These single-use gloves prevent cross contamination and provide the dexterity needed for intricate work.

Handle small items when dexterity is essential and full hand coverage isn't needed. These single-use cots cover fingers without restricting hand movement.

Handle food without contaminating it. Made with metal additives, these gloves will be caught by metal detectors if they fall into a batch—helping you comply with Hazard Analysis and Critical Control Point (HACCP) programs.

Use these gloves to avoid damaging static-sensitive electronic parts.

These gloves meet ANSI/ISEA 105 standards for cut resistance. They are cleaned and bagged in environments with low levels of particulates, so they won't contaminate your work area.

Cleaned and bagged in environments with low levels of particulates, these powder-free, unlined gloves won't contaminate your work area.

Keep disposable gloves accessible and ready to use.

These knee-length coats hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

Wear these coats to protect sensitive equipment from damage caused by static electricity. Coats are knee length.

These hip-length jackets hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

Rubber and plastic coatings prevent oil and other liquids from penetrating these aprons.

These aprons are PVC plastic to resist acid spills and splashes.

Just like the scrubs worn in hospitals, these shirts are soft and comfortable for all-day wear.

These coveralls have a polyethylene coating to provide full body protection against chemical spills and splashes.

Made of self-extinguishing Pyrolon, these coveralls help comply with NFPA 2113 standards when worn over flame-resistant clothing. Pyrolon won’t melt or drip if intermittently exposed to flames, which reduces the risk of burns.

Provide easy access to disposable clothing—these dispensers mount to the wall.

Coats are knee length, providing more coverage than shirts.

Swap these covers out after every use to keep shared earmuffs, headsets, and headphones germ-free without sterilizing them.

Breathable to keep you cool and comfortable, these pants protect against dirt, grime, and light liquid splashes.

Wear these knee-length coats to stop particles, microbes, and other pollutants from contaminating a space.

These hoods prevent pollutants, such as dust particles and microbes, from contaminating a space.

As you breathe through them, these respirators filter out contaminants in the air. Throw them out when soiled, damaged, or breathing is difficult.

Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter when breathing through these respirators becomes difficult.

These masks are lightweight and easy to breathe through.

Mount this dispenser on the wall to stock up to 40 masks.

Comfortably wear face masks for extended periods in food-processing facilities.

For use in light duty applications that don’t require much impact resistance, these plastic shields protect your eyes, nose, and mouth from dust, liquids, sneeze and cough particles, and other debris.

Eyeglass frames make these face shields easy and comfortable to wear for extended periods of time, even in hot conditions.

Designed to meet clean room standards, these boot covers act as a barrier between the worker and the room to prevent pollutants such as dust particles and microbes from contaminating a space.

Taller than shoe covers, boot covers protect mid-calf and knee-high boots. They are lightweight and protect boots from dirt, grime, and liquid splashes.