Wall-Mount Ladders with Cage
Ladder and cage come unassembled for mounting flexibility and lower freight costs. Cages start between 7 and 8 feet from the ground and extend beyond the top rung by 42" with a walk-through exit. When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls.
Optional security cover prevents unauthorized access. It covers five rungs and is secured by two hooks at the top and a U-clamp at the bottom.
Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Ladder | Cage | Flared Cage | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | O'all Ht. with Cage | Wd. | Dp. | Wd. | Dp. | Wt., lbs. | No. of Steps | Step Tread | Mounting Hardware Included | No. of | Lg. | Wd. | Assembled or Unassembled | Specifications Met | Each | |
Galvanized Steel | ||||||||||||||||||
300-lb. Capacity | ||||||||||||||||||
| 10'6" | 11 | 20" | 14'1" | 27" | 28 1/2" | 35" | 32 1/2" | 180 | 11 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 000000000 |
| 11'6" | 12 | 20" | 15'1" | 27" | 28 1/2" | 35" | 32 1/2" | 185 | 12 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 12'6" | 13 | 20" | 16'1" | 27" | 28 1/2" | 35" | 32 1/2" | 195 | 13 | Knurled | Yes | 12 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 13'6" | 14 | 20" | 17'1" | 27" | 28 1/2" | 35" | 32 1/2" | 210 | 14 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 14'6" | 15 | 20" | 18'1" | 27" | 28 1/2" | 35" | 32 1/2" | 220 | 15 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 15'6" | 16 | 20" | 19'1" | 27" | 28 1/2" | 35" | 32 1/2" | 230 | 16 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 16'6" | 17 | 20" | 20'1" | 27" | 28 1/2" | 35" | 32 1/2" | 235 | 17 | Knurled | Yes | 16 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 17'6" | 18 | 20" | 21'1" | 27" | 28 1/2" | 35" | 32 1/2" | 250 | 18 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 18'6" | 19 | 20" | 22'1" | 27" | 28 1/2" | 35" | 32 1/2" | 265 | 19 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 20'6" | 21 | 20" | 24'1" | 27" | 28 1/2" | 35" | 32 1/2" | 280 | 21 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 22'6" | 23 | 20" | 26'1" | 27" | 28 1/2" | 35" | 32 1/2" | 300 | 23 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 24'6" | 25 | 20" | 28'1" | 27" | 28 1/2" | 35" | 32 1/2" | 315 | 25 | Knurled | Yes | 20 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 26'6" | 27 | 20" | 30'1" | 27" | 28 1/2" | 35" | 32 1/2" | 340 | 27 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 28'6" | 29 | 20" | 32'1" | 27" | 28 1/2" | 35" | 32 1/2" | 360 | 29 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
| 29'6" | 30 | 20" | 33'1" | 27" | 28 1/2" | 35" | 32 1/2" | 380 | 30 | Knurled | Yes | 24 | 3/4" | 3/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.3 | 0000000 | 00000000 |
Wall-Mount Ladders with Welded-On Cage
A cage is welded to these ladders for quick installation. Ladders come in sections no longer than 7 feet for easy handling—bolt sections together end-to-end (fasteners included). Cages start 7 feet above the bottom of the ladder and extend beyond the top rung by 42".
Optional security cover prevents unauthorized access. It can be welded or bolted on (holes must be drilled) to open from the right side.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Ladder | Cage | Flared Cage | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht. | Wd. | O'all Ht. with Cage | Wd. | Dp. | Wd. | Dp. | Wt., lbs. | No. of Steps | Step Tread | Projection | Mounting Hardware Included | No. of | Dia. | No. of Mounting Brackets | Specifications Met | Each | |
Gray Powder-Coated Steel | ||||||||||||||||||
300-lb. Capacity | ||||||||||||||||||
| 12'1" | 12'1" | 20" | 15'7 1/2" | 30" | 27" | 36 1/2" | 30" | 260 | 13 | Ribbed | 7" | No | 10 | 9/16" | 10 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 000000000 |
| 16'1" | 16'1" | 20" | 19'7 1/2" | 30" | 27" | 36 1/2" | 30" | 350 | 17 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 20'1" | 20'1" | 20" | 23'7 1/2" | 30" | 27" | 36 1/2" | 30" | 430 | 21 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 24'1" | 24'1" | 20" | 27'7 1/2" | 30" | 27" | 36 1/2" | 30" | 520 | 25 | Ribbed | 7" | No | 18 | 9/16" | 18 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| 27'1" | 27'1" | 20" | 30'7 1/2" | 30" | 27" | 36 1/2" | 30" | 575 | 28 | Ribbed | 7" | No | 14 | 9/16" | 14 | OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, ANSI A14.3 | 00000000 | 00000000 |
| Ht., ft. | Wd. | Wt., lbs. | Features | Max. Padlock Shackle Dia. | Mounting Hardware Included | Each | |
Gray Powder-Coated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 6 | 20 7/8" | 41 | Padlockable Hasp | 13/32" | Yes | 00000000 | 0000000 |
Ladder Cages
Feel secure on tall ladders. These cages surround the ladder to help reduce the risk of falls. Made of powder-coated steel, they resist rust, so you can use them outdoors. Each section is fully welded and mounts to the side rails of stationary ladders. They don’t mount to walls or other cages. For a complete assembly, you’ll need at least one middle/top section and one bottom section.
Bottom sections are flared to give you room to enter or exit your cage. Middle/top sections make your cage longer. They can also act as a top section when your ladder system includes a hatch. Walk-through sections are required when you can step through the top of your ladder onto a landing. They should extend 42" above the top rung.
Yellow cages stand out in busy areas.
Note: Ladder cages meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Cage | Flared Cage | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Ht., ft. | Wd. | Dp. | Wd. | Dp. | For Ladder Wd. | Max. Ladder Rail Dp. | Wt., lbs. | Mounting Hardware Included | Specifications Met | Each | |
Gray | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 2 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 47 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 0000000 |
| 3 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 54 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Middle/Top Section | |||||||||||
| 2 | 30" | 30" | __ | __ | 16"-20" | 2" | 55 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 30" | 30" | __ | __ | 16"-20" | 2" | 61 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 7 | 30" | 30" | __ | __ | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Walk-Through Section | |||||||||||
| 5 | 30" | 30" | __ | __ | 16"-20" | 2" | 85 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Yellow | |||||||||||
Powder-Coated Steel | |||||||||||
Bottom Section | |||||||||||
| 2 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 47 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 54 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 38" | 34" | 38" | 38" | 16"-20" | 2" | 71 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Middle/Top Section | |||||||||||
| 2 | 30" | 30" | __ | __ | 16"-20" | 2" | 55 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 3 | 30" | 30" | __ | __ | 16"-20" | 2" | 61 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 4 | 30" | 30" | __ | __ | 16"-20" | 2" | 68 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
| 7 | 30" | 30" | __ | __ | 16"-20" | 2" | 110 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Walk-Through Section | |||||||||||
| 5 | 30" | 30" | __ | __ | 16"-20" | 2" | 85 | Yes | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI A14.3 | 0000000 | 000000 |
Ladder Support Posts
Add safety and convenience to your wall and tank ladders. Posts extend above the ladder top and lock in place to guide you and provide stability. A release lever lets you lower the post when it's not in use. Mount to the top two rungs of your ladder.
| Material | Color | For Step Dia. | Max. Ctr.-to-Ctr. Step Ht. | Ht. Above Ladder | Height | Wd. | Dp. | Mounting Hardware Included | Wt., lbs. | Features | Each | |
| Powder-Coated Steel | Yellow | 3/4"-1 1/4" | 14" | 42" | 42"-61 3/8" | 1 1/2" | 1 1/2" | Yes | 24 | Locking Mechanism, Lowering Release Lever | 0000000 | 0000000 |
| Galvanized Steel | __ | 3/4"-1 1/4" | 14" | 42" | 42"-61 3/8" | 1 1/2" | 1 1/2" | Yes | 24 | Locking Mechanism, Lowering Release Lever | 0000000 | 000000 |
Aluminum | __ | 3/4"-1 1/4" | 14" | 42" | 42"-61 3/8" | 1 1/2" | 1 1/2" | Yes | 14 | Locking Mechanism, Lowering Release Lever | 0000000 | 000000 |
| 304 Stainless Steel | __ | 3/4"-1 1/4" | 14" | 42" | 42"-61 3/8" | 1 1/2" | 1 1/2" | Yes | 24 | Locking Mechanism, Lowering Release Lever | 0000000 | 00000000 |
Antislip Step Covers
Weld these covers to the rungs of your wall and tank ladders for excellent slip resistance. Covers fit square and round rungs. Can be cut with a hand grinder or miter saw using a masonry blade.
Ladder Lockout Signs
Block the rungs on a ladder with these lockout signs to prevent unauthorized climbing. They are compatible with most step, straight, extension, and mounted ladders. The bilingual warning message and tag provide a clear visual deterrent. Use the included cable, lockout hasp, and padlock to secure the sign to the ladder.
| For Ladder Type | Mount Type | Material | Ht. | Wd. | Thick. | Includes | Each | |
Danger—Do Not Climb On Ladder/Danger—Ne Pas Monter Sur L'Echelle (English/French) | ||||||||
|---|---|---|---|---|---|---|---|---|
| Extension, Mounted, Step, Straight | Plain Back | Aluminum | 42" | 13" | 0.063" | Lockout Hasp, Padlock, Cable, Five Tags | 00000000 | 0000000 |
Danger—Do Not Climb On Ladder/Peligro—No Trepe La Escalera (English/Spanish) | ||||||||
| Extension, Mounted, Step, Straight | Plain Back | Aluminum | 42" | 13" | 0.063" | Lockout Hasp, Padlock, Cable, Five Tags | 00000000 | 000000 |
Safety Gates for Werner Platform Step Ladders
Compatible with most Werner platform step ladders, these gates fully enclose the platform, enabling you to safely work with both hands while facing any direction. To install, drill holes in the ladder rails and attach the gate with the included hardware. Push the gate arm up to easily step onto the platform, and then secure the latch to ensure it stays closed while working. The gate folds for compact storage.
| For Manufacturer Series | For Manufacturer Model Number | Wt., lbs. | Foldable | Assembled or Unassembled | Mounting Hardware Included | Each | |
| PD6200, PD7300 | PD6203, PD6204, PD6206, PD6208, PD6210, PD7303, PD7304, PD7306, PD7308, PD7310 | 5 | Yes | Unassembled | Yes | 0000000 | 0000000 |
Shoes for Step Ladders
Replace worn out shoes on step ladders.
| Manufacturer Model Number | Number of Shoes Included | Mounting Hardware Included | Each | |
Louisville | ||||
|---|---|---|---|---|
| PK130B | 4 | Yes | 0000000 | 000000 |
Rail Caps for Ladders
Protect supporting surfaces from damage.
For Rail | ||||
|---|---|---|---|---|
| Wd. | Dp. | Material | Pair | |
| 1"-1 1/4" | 3"-3 1/4" | Plastic | 0000000 | 000000 |
Shoes for Straight and Extension Ladders
Replace worn out shoes on straight and extension ladders.
| For Rail Material | Manufacturer/Brand Model Number | Number of Shoes Included | Mounting Hardware Included | Each | |
Louisville | |||||
|---|---|---|---|---|---|
| Aluminum, Fiberglass | PK130L | 2 | Yes | 0000000 | 000000 |
| Aluminum, Fiberglass | PK137 | 2 | Yes | 0000000 | 00000 |
Werner | |||||
| Aluminum | 26-1 | 2 | Yes | 0000000 | 00000 |
| Aluminum | 26-2 | 2 | Yes | 0000000 | 00000 |
| Fiberglass | 26-3 | 2 | Yes | 0000000 | 00000 |
| Fiberglass | 26-5 | 2 | Yes | 0000000 | 00000 |
For Rail | |||||
|---|---|---|---|---|---|
| Wd. | Dp. | Number of Shoes Included | Mounting Hardware Included | Each | |
Galvanized Steel | |||||
| 1 3/8" | 3" | 2 | Yes | 000000 | 000000 |
Slip-Resistant Handrail Tape
Wrap around ladder handrails for a solid grip.
| Wd. | Lg., ft. | Material | Temp. Range, °F | Color | Each | |
| 2" | 8 | Plastic | -20° to 160° | Black | 0000000 | 000000 |
Nonskid Pads for Rolling Platform Ladders
Bolt these pads into a ladder's front legs to add slip resistance.
Mounting Bolt | ||||||
|---|---|---|---|---|---|---|
| Dia. | Material | Color | Dia. | Lg. | Each | |
| 2 1/2" | Rubber | Black | 3/8" | 1" | 00000000 | 000000 |
Ladder Extension Rails
Add these rails to straight ladders and extension ladders to provide a safe transition to an elevated surface. The grab posts have grip tape to keep your hands from slipping. Quickly install these rails by sliding them over the ladder’s side rails, locking them into place over the top rung, and tightening the thumb screws.
Add an optional safety gate to prevent falls through the rail opening. Push the gate open to step onto the elevated surface; a self-closing mechanism automatically closes it. Before using the gate, secure the ladder to a fixed structure with a ladder anchor.
Note: Per OSHA regulations, the rails must rise at least three feet above the elevated surface being accessed.
For Max. Rail | ||||||||
|---|---|---|---|---|---|---|---|---|
| Grab Post Ht. | Wd. | Dp. | Wt., lbs. | Color | Specifications Met | Features | Each | |
Powder-Coated Aluminum | ||||||||
| 36" | 1 3/4" | 3 3/4" | 15 | Orange | OSHA Compliant 29 CFR 1910 Subpart M, OSHA Compliant 29 CFR 1926 Subpart M | Hand Grips | 0000000 | 0000000 |
| Ht. | Wd. | Color | Mounting Hardware Included | Wt., lbs. | Specifications Met | Each | |
Powder-Coated Aluminum | |||||||
|---|---|---|---|---|---|---|---|
| 13" | 29 1/2" | Orange | Yes | 11 | OSHA Compliant 29 CFR 1910 Subpart M, OSHA Compliant 29 CFR 1926 Subpart M | 0000000 | 0000000 |
Nonskid Feet for Rolling Platform Ladders
Slide these feet on ladder legs to add slip resistance.
| For Tube OD | Material | Color | Features | Pkg. Qty. | Pkg. | |
| 1" | Rubber | Black | Reinforced Bottom | 4 | 00000000 | 000000 |
Abrasive Antislip Tape with Conformable Backing
Stick this ultra-flexible tape to ladder rungs, diamond tread plates, and other uneven and irregular surfaces with sharp corners. After installation, wait one hour before walking on this tape.
| Wd. | Lg., ft. | Thick. | Adhesive Type | Time Required Before Use, hrs. | Temp. Range, °F | For Use Outdoors | Each | |
Roll | ||||||||
|---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||
| 2" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 000000 |
| 4" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |
| 6" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |
| 12" | 15 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 000000 |
Rectangle | ||||||||
Aluminum | ||||||||
| 6" | 2 | 3/64" | Acrylic | 1 | 40° to 175° | Yes | 0000000 | 00000 |