Mount this laser into a chuck on your milling machine or drill press to precisely indicate the drilling point. The laser projects a red dot and is best viewed indoors.

With a sealed lens and an IP67 rating, these lasers are dust and liquid tight, so you can mount them to machines in dusty or wet areas such as labs, warehouses, or marine environments to align components.

Red lasers are best for indoor environments because they’re dimmer than green lasers.

Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away.

Position these lasers at the correct angle for your job with adjustable angle mounts. They allow 360° rotation.

Use magnetic mounts to attach these lasers to machines and other steel surfaces instead of drilling holes and bolting them. They hold lasers at a fixed angle, but you can combine them with adjustable angle mounts for 360° rotation.

Projecting a light that's even and bright the entire length, these lasers create a line that can be measured from end to end. They're compatible with machine-vision cameras, so they're often used as a reference point for machine inspection and robot guidance. Their green light is brighter and easier to see outdoors, in strongly lit rooms, and from farther away than red lasers. As their light travels, the diameter of their beam grows. They come with an adjustable angle mount that rotates 360°, letting you position the laser at the correct angle for your job. Rated IP67, these lasers are dust and liquid tight, so you can use them in dusty or wet areas such as labs, warehouses, or marine environments.

120V AC lasers plug into standard outlets.

12V DC lasers draw power through their wire leads. Connect these lasers to devices such as programmable logic controllers (PLCs) and timer relays to automate when they turn on and off. However, you can’t plug them into standard outlets.

Use magnetic mounts to attach these lasers to machines and other steel surfaces instead of drilling holes and bolting them. They hold lasers at a fixed angle, but you can combine them with the adjustable angle mount for 360° rotation.

Position these lasers directly on a flat surface. Lasers project a red dot that is best viewed indoors. Twist the knob to focus the dot so it is more precise at short distances.

Twist the head to switch between a dot, a horizontal line, or a vertical line. Project accurate level references onto walls when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

Set these lasers on any surface, and they'll level themselves within about 4°. Whether you're hanging a drop ceiling or aligning bench tops, your installation will be at the right height. Laser lights are red and are best viewed indoors. Lasers can be mounted to a tripod.

Set these lasers on any surface, and they will level themselves within about 4°. The laser projects 360° around the base to show the level line. Whether you're hanging a drop ceiling or aligning bench tops, your installation will be at the right height. Mount them to a tripod (not included) to level at a greater range of heights.

Red lasers are best viewed indoors. They include a laser detector, which indicates the height of the laser’s beam when you can’t see it, such as in bright lighting or at long distances.

Green lasers are four times brighter than red lasers, so you can see the beam outdoors and in bright lighting. They’re also easier to spot from far away. These lasers include a magnetic target, which you can mount at the height you need to reflect the beam, making it brighter and easier to see from a distance.

Whether you’re hanging a drop ceiling or aligning bench tops, use the cross-hair lines of these lasers to install material at the right height. Placed on any surface, they adjust themselves within a few degrees of level.

Red lasers are best viewed indoors because they’re dimmer than green lasers. They come with a tripod to position them up to 46" high.

Green lasers appear up to four times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away. Add a tripod to adjust the height of these lasers between 16" and 51".

This level projects three dots simultaneously to verify your installation is straight, level, and plumb. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe. Project accurate level references onto walls and ceilings when hanging light fixtures or installing pipe.The laser light is red and is best viewed indoors. The body has a V-groove for stability on curved surfaces. It can be mounted to a tripod. Also known as a torpedo level.

Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Add a leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.

These kits include a laser, a beam splitter, and a leveling plate. Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. The beam splitter converts one dot into two dots that are set at a 90° angle. Use the leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.

Red lasers are best used indoors, since they’re dimmer than green lasers.

Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.

Dot-to-line converter changes the dot into a vertical or horizontal line.

Mark a dot up to 500 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. These lasers are also known as torpedo levels.

Red lasers are dimmer than green lasers, so they’re best viewed indoors.

Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.

Use a leveling plate for mounting the laser to a tripod, or placing it on a surface. The plate has three adjustable legs to level the laser.

90° beam splitter converts one dot into two dots set at a 90° angle.

Dot-to-line converter changes the dot into a vertical or horizontal line.