Made from silicone, these sealants are RTV (room-temperature vulcanizing). They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

When Dow Corning 700 requires a primer, for best results use PR-1200 on metal and PR-1205 on plastic.

Resistant to mold and mildew, these sealants are well suited to high-humidity environments. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Dow Corning 786 meets NSF/ANSI 51 standards and is FDA compliant for direct contact with food.

Sealants that cannot be sold to Canada are restricted by product labeling requirements.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to 1/2" wide. They cannot be sold to California because they exceed local regulatory limits on VOCs (volatile organic compounds).

Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).

Seal metal-to-metal joints in ductwork. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

VOC (volatile organic compounds) regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.

Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.

Sealants that cannot be sold to the listed areas exceed local regulatory limits on VOCs (volatile organic compounds).

The textured finish matches concrete surfaces. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

Prepare joints and surfaces to ensure proper sealant adhesion.

Primer for use on PVC plastic and TPO plastic is often used on roof joints.