Consistently position workpieces in a three-jaw lathe chuck by installing a chuck stop. These stops enable short workpieces to extend beyond the chuck's jaws, providing additional clearance.

Hold machinable lathe chuck jaws in place during machining to make accurate cuts, ensuring the jaws will securely grip your workpiece.

No need to break down a collet set up when a workpiece doesn't fit a 5C collet. Install one of these lathe chuck adapters in your 5C collet chuck or holder and its three jaws will securely grasp the workpiece.

Fold the pliable tabs over the jaws to install.

These V-shaped liners hold large round material.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

Designed for precision grinding and inspection, the construction of these vises ensures workpieces are held perfectly square. They are also known as toolmakers’ vises.

Use these vises for reliable workholding on CNC machines.

Made from unhardened aluminum or steel, machine these jaws to fit the contours and curves of your workpiece.

The small size allows multiple vises to be mounted on a single machine table. Frequently used in 4- and 5-axis milling machines, these vises have stepped jaws with serrated teeth that firmly grip just a small portion of your workpiece.

The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.

Tilt the head on two axes and rotate the base to position your workpiece at almost any angle.

The jaws move inward at the same time to consistently position your workpiece in the center of the vise.

Push the handle to slide the jaw into place for quicker setup than standard drill-press vises.

The dials on these vises are graduated in smaller increments than standard cross‐slide drill‐press vises for finer adjustment. Use to precisely position work on X and Y axes.