Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

The diamond tip on these tools offers superior cutting performance on nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic.

A thinner cutting edge and thicker top edge give these blades a T‐shape profile that moves chips away from the cut and reduces friction for fast cutting.

Cut small grooves inside a workpiece for insertion and removal of O-rings.

Machine grooves in plastic and most metal with these high-speed steel tools.

Form concave or convex edges on a workpiece.

These are the smallest boring tools we offer.

Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.

Cut threads in plastic and most metal with these high-speed steel tools.

Solid carbide provides more rigidity than carbide-tipped tools.

Contour the interior wall of a hollow workpiece.

Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

These sets contain some of the smallest boring tools we offer.

Place a cutoff blade into one of these holders to keep it in place in the lathe.

Secure carbide inserts inside these holders for stable turning.

When it's time to replace the screws in a carbide insert holder, use the reference number on your holder to find the right size.

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Optimized for use on steel, these inserts can run at higher cutting speeds and will last longer than inserts for multiple materials.

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts.

These sets have five indexable turning tools with carbide inserts and a wood storage stand. When one edge of a tool's insert dulls, rotate it to use a sharp edge.

Resisting wear and fractures when cutting hardened steel, these cubic boron nitride inserts last longer than carbide inserts.

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Pair these holders with a tool block for right- and left-hand mounting in a lathe.

Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block.

Cut square corner grooves in a workpiece or cut completely through a part.

These inserts can cut grooves on both the outside and inside of a workpiece depending on the holder used.

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.

Replace worn or missing clamps and clamp screws in high-performance carbide insert holders for threading and grooving.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

These holders conform to ANSI standards.

Replace Torx keys and screws for boring carbide insert holders with coolant hole.

Use these tools to enlarge existing holes to precise diameters. They come with an insert installed. When one edge of the insert dulls, rotate it to use a sharp edge.

Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece.

Consistently position workpieces in a three-jaw lathe chuck by installing a chuck stop. These stops enable short workpieces to extend beyond the chuck's jaws, providing additional clearance.

Also known as lathe chuck keys, the long T-handle on these wrenches provides the leverage to open tight lathe chucks.

Machine these jaws to fit the curves and edges of your unique workpiece for a tighter hold and more stability than standard hardened jaws.

Also known as scroll chucks, these are self centering—all three jaws move in unison, centering the workpiece as they close.

Hold machinable lathe chuck jaws in place during machining to make accurate cuts, ensuring the jaws will securely grip your workpiece.

Attach these tools to a manual lathe.

Pair these knurls with a knurling tool to create patterns on a workpiece for an improved grip.

These tools are specially designed to perform heavy duty knurling applications using a CNC lathe.

The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.

The sleeve on these mandrels expands to hold a range of diameters for better versatility than solid and expanding-end mandrels.

These light duty centers are for intermittent use on manual lathes.

Also known as bull-nose centers, these have a wide head to hold pipe and large-diameter tubing.

Block chips while maintaining an unobstructed view of the workpiece.

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills for Manual Milling Machines.

Fasten carbide inserts directly to these end mills for a hold that's strong enough to handle the high speeds of a CNC machine. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire end mill.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

A 45° corner chamfer improves cutting edge strength, so these end mills last longer than standard square end mills when milling hard material; however they do not create as sharp of a corner. Variable spacing between the flutes reduces vibration, allowing them to provide fast cuts, smooth finishes, and long tool life.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Also known as NC tolerance end mills, these carbide end mills have oversize mill diameter tolerances. They're sized to match standard high-speed steel end mills, so you can use them as longer-lasting replacements without changing the size of the cut.

A titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

Alternating layers of titanium-nitride (TiN) and titanium-aluminum-nitride (TiAlN) coatings give these end mills the hardness, wear resistance, and temperature resistance needed for cutting tool steel, hardened steel, and iron.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. They have a high helix angle and a wear-resistant coating for excellent shearing and chip removal in stainless steel and titanium.

These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

A higher helix angle means these end mills clear more chips than other roughing cobalt steel end mills, making them better for milling aluminum, brass, and bronze. Serrations along the cutting edge act as chip breakers, so they can remove large amounts of material at high speeds.

Use these end mills for short runs and general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Commonly used to make keyways in rotary shafts, these tools have a -0.0015" to 0.0000" mill diameter tolerance for creating a precise fit.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than cobalt steel for the longest life and best finish on hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

Create dovetail grooves that allow O-rings to flex without falling out of place.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They create dovetail slots for connecting two components with a sliding fit.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts.

Mill an angled edge to the entire outside diameter of pipe, tubes, and rods in a single pass with more speed and precision than a handheld scraper. These end mills deburr pipe and tube for butt welds and shape rods for sliding into housings and holes.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. The teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.